Журналы →  Chernye Metally →  2018 →  №4

Chernye Metally


The 4th issue of “Chernye metally” journal (2018) includes the most of its usual sections.


“Iron making” section is presented by the paper of H. Spahn devoted to modifications of macro- and microstructure of self-sufficient agglomerate during temperature variation in the modern blast furnaces.


“Steel making” section presents the work from Leoben mining university (Austria); its specialists investigated content of hexavalent chromium in steelmaking slags and the place of this process in the framework of European technical policy.


“Continuous casting and foundry production” section includes the paper by I.E. Illarionov from Chuvash State University on metal phosphate binders and moulding mixtures based on core sands and moulds for manufacturing iron and steel castings. The results of studies of dependence between density, surface tension, wetting contact angle and binding capacity are examined.


“Rolling and other metal forming processes” is the main section in this issue. S.P. Galkin and his colleagues displayed the resource-saving technology for rolling of round products from used railroad shafts at the original mini-mill. Publication from Primetals Technologies showed the operating results of the new intensive high-pressure cooling line at the wide hot strip mill of thessenkripp Steel Europe plant in Duisburg. AG der Dillinger Hüttenwerke presented the new sheet steel Dillimax for high-capacity lifting equipment. A.A. Filippov and other scientists from Nizhniy Novgorod observed the method of forming the structural and mechanical properties of rolled steel for heading of core products.


“Tube making” section includes the paper of G.A. Orlov and his colleagues from Ural Federal University about the complex evaluation of the quality of hot-rolled tubes. This evaluation was done for the tubes manufactured via the existing and improved technologies, with comparison of the obtained parameters in accordance with Harrington desirability scale.


The issue also contains the papers in the sections “Surface coating and processing”, “Power engineering and ecology” and “Economics and finances”.


Please find more details below, or order your printed or electronic version of the Journal.

Название The prospects of blast furnace practice using reduction and melting at present time
Автор H. Spahn
Информация об авторе

Münster, Germany:

H. Spahn, Dr. Eng., e-mail: spahn-muenster@t-online.de

Название Investigation of the content hexavalent chromium occurred in slags during steel making process
Авторы E. Cheremisina, J. Schenk
Информация об авторах

Mining University (Leoben, Austria):

E. Cheremisina, Dr. Min., e-mail: elizaveta.cheremisina@k1-met.com
J. Schenk, Dr., Prof., Head of the Chair of Ferrous Metallurgy

Continuous casting and foundry production
Название Application of fabrication technology for metal phosphate binders, core sands and moulding mixtures on their base
Автор I. E. Illarionov
Информация об авторе

Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof, Head of the Chair “Metal science and metallurgical processes”, e-mail: tmilp@rambler.ru

Rolling and other metal forming processes
Название Resource-saving technology for production of round bars from used shaft of rolling railroad stock
Авторы S. P. Galkin, B. A. Romantsev, Dinh Xuan Ta, Yu. V. Gamin
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia):

S. P. Galkin, Dr. Eng., Prof., Chair of Metal Forming, e-mail: glk-omd@yandex.ru
B. A. Romantsev, Dr. Eng., Prof., Chair of Metal Forming
Dinh Xuan Ta, Post-graduate
Yu. V. Gamin, Cand. Eng., Senior Lecturer, Chair of Metal Forming

Название New technological line for intensive strip cooling under high pressure
Авторы M. Moninger, Ch. Matten, A. Gaganov, E. Schaffnit
Информация об авторах

Primetals Technologies (Erlangen, Germany):

M. Monninger, Special Engineer, e-mail: martin.moninger@primetals.com


thyssenkrupp Steel Europe (Duisburg, Germany):
Ch. Matten, Senior Engineer, Automation Dept., Hot strip mill No. 2
A. Gaganov, Dr., Senior Engineer, Hot rolling mill No. 2
E. Schaffnit, Senior Engineer, Research and Development

Название Dillimax strip steel opens new opportunities for lifting equipment
Автор W. Holbling
Информация об авторе

AG der Dillinger Hüttenwerke (Dillingen, Germany):

W. Hölbling, Dr. Eng., e-mail: wolfram.hoelbling@dillinger.biz

Название The method of forming the structural and mechanical properties of rolled steel for heading of core products
Авторы A. A. Filippov, G. V. Pachurin, N. A. Kuzmin, Yu. I. Matveev
Информация об авторах

Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia):

A. A. Filippov, Cand. Eng., Associate Prof.
G. V. Pachurin, Dr. Eng., Prof., e-mail: pachuringv@mail.ru
N. A. Kuzmin, Dr. Eng., Prof., Head of the chair


Volga State University of Water Transport (Nizhniy Novgorod, Russia):
Yu. I. Matveev, Dr. Eng., Prof.

Название Complex evaluation of the quality of hot-rolled tubes
Авторы G. A. Orlov, Yu. N. Loginov, A. G. Orlov
Информация об авторах

Ural Federal University (Ekaterinburg, Russia):

G. A. Orlov, Dr. Eng., Prof., Chair of Metal Forming
Yu. N. Loginov, Dr. Eng., Prof., Chair of Metal Forming
A. G. Orlov, Magister, e-mail: grorl@mail.ru

Coating and surface treatment
Название Intellectual management for heat treatment and zinc coating facilities
Авторы C. A. Klein, U. Sommers, F. Bruhl, A. Lhoest, E. Montagna, W. Beugeling, M. Barwald
Информация об авторах

SMS Group (Düsseldorf, Germany):

C. A. Klein, Dr. Phys., Head of Direction “Grounds and Models of Strip Processing Equipment, Furnaces and Heat Engineering, Central Development Dept., e-mail: carsten-andreas.klein@sms-group.com
U. Sommers, Dr., Head of Direction “Strip Processing Equipment, Furnaces and Heat Engineering, Central Development Dept.
F. Brühl, Dr., Head of Direction “Strip Processing and Thermal Technological Equipment


Drever International S.A. (Angleur, Liège, Belgium):
A. Lhoest, Eng., Control Systems Dept.


Tata Steel Segal S.A. (Ivoz-Ramet, Belgium):
E. Montagna, Production Dept.


Tata Steel Ijmuiden (Ijmuiden, Netherlands):
W. Beugeling, Mag. Sc., Senior Product Technologist, Product Management and Development


EMG Automation GmbH (Wenden, Germany):
M. Bärwald, Mag. Eng., Mag. Econ., Manager of ImpocPro product

Название New processes of hot galvanizing for special steel grades
Авторы F. Bruhl, H. Behrens, H. G. Hartung, J.-P. Crutzen, C. Sasse
Информация об авторах

SMS Group (Düsseldorf, Germany):

F. Brühl, Dr., Head of Direction “Strip Processing and Thermal Technological Equipment“
H. Behrens

H. G. Hartung

C. Sasse, e-mail: caesar.sasse@sms-group.com


Drever International (Lüttich, Belgien):
J.-P. Crutzen

Power engineering and ecology
Название Possibility of recycling of plastic mixes instead of carbon during electric melting
Авторы A. Primavera, D. Braga, S. Tiburzio, E. Faraci
Информация об авторах

Danieli & C. S. p. A. (Buttrio, Italy):

A. Primavera, e-mail: a.primavera@danieli.it

D. Braga

S. Tiburzio


Centro Sviluppo Materiali S.p.A. (Rome, Italy):
E. Faraci

Economics and finances
Название 2017 year as decisive period for steel industry
Автор H. J. Kerkhoff
Информация об авторе

VDEh Steel Institute (Düsseldorf, Germany):

H. J. Kerkhoff, President of “Steel” Economical Union, e-mail: redaktion@stahleisen.de

Iron and steel news
Название Forecast of global steel demand until 2025
Название 90th anniversary of A. A. Kugushin
Журналы →  Chernye Metally →  2018 →  №4