Journals →  Chernye Metally →  2018 →  #4 →  Back

ArticleName Complex evaluation of the quality of hot-rolled tubes
ArticleAuthor G. A. Orlov, Yu. N. Loginov, A. G. Orlov

Ural Federal University (Ekaterinburg, Russia):

G. A. Orlov, Dr. Eng., Prof., Chair of Metal Forming
Yu. N. Loginov, Dr. Eng., Prof., Chair of Metal Forming
A. G. Orlov, Magister, e-mail:


The paper os devoted to evaluation of the quality of hot-rolled tubes using the complex quality parameters. The average arithmetic and geometrical complex parameters are compared, as well as the parameters obtained with usage of possibilities of entering the allowable requirements by these parameters on the example of tubes for oil and gas industry. It is shown that all parameters have close values. The complex evaluation of the tubes manufactured via the existing and improved technologies is conducted, the effect of improvement of separate parameters on the quality of rolled tubes in general is assessed. Comparison of the complex quality parameters of tubes that were rolled via two technologies has been done in accordance with Harrington desirability scale. The parameter of the existing technology corresponds to the sufficient quality level according to the standards, while the parameter of the improved technology corresponds to allowable and good quality level.

keywords Hot-rolled tubes, complex quality evaluation, quality parameters, probabilistic approach, Harrington desirability scale

1. Azgaldov G. G., Raykhman E. P. About quality metering. Moscow : Izdatelstvo standartov, 1973. 172 p.
2. Azgaldov G. G., Kostin A. V., Sadovov V. V. Quality metering for everyone : tutorial. Moscow : ID InformZnanie, 2012. 165 p.
3. Gun G. S. Quality management of high-precision shapes. Moscow : Metallurgiya, 1984. 152 p.
4. Rubin G. Sh., Chukin M. V., Gun G. S., Zakirov D. M., Gun I. G. Development of qualimetry theory for metalware products. Chernye Metally. 2012. No. 7. pp. 15–21.
5. Lubenets A. N., Smirnov E. N., Shcherbachev V. V. Production of ship sections from concast billets. Stal. 2002. № 8. P. 102–106.
6. Shubin I. G., Rumyantsev M. I., Toropitsina U. A., Demidova O. O. The characteristics selection for the impact of the steel chemical composition on the mechanical property indicators and microstructure of the high-carbonated rope wire. Vestnik MGTU imeni G. I. Nosova. 2008. No. 3. pp. 34–38.
7. Naydenova A. V., Moller A. B. Increasing of efficiency of method of calculation of complex indicator of quality of reinforcing steel. Kalibrovochnoe byuro. 2014. Iss. 4. pp. 17–22.
8. Zakirov D. M., Rubin G. Sh., Salnikov V. V. Mathematical logic apparatus for complex assessment of efficiency of technological processes. Proizvodstvo prokata. 2006. No. 12. pp. 35–58.
9. Steblov A. B. Comprehensive index of quality of rolled steel and its application. Lite i metallurgiya. 2017. No. 1(86). pp. 97–102.
10. Novik F. S., Arsov Ya. B. Optimization of metal technology processes by experiment planning methods. Moscow : Mashinostroenie, 1980. 304 p.
11. Kukhar V. V. Producing of elongated forgings with sharpened end by rupture with local heating of the workpiece method. Metallurgical and Mining Industry. 2015. No. 6. pp. 122–132.
12. Weinberg M., Meuser H. Integrated process and quality control to secure the production of slabs for plates for line pipe application. Proceedings of the Biennial International Pipeline Conference. IPC. 2016 Vol. 3 P. V003T0SA019. DOI: 10.1115/IPC2016-64099
13. Podder B., Mondal Ch., Kumar K. R., Yadav D. R. Effect of preform heat treatment on the flow formability and mechanical properties of AISI4340 steel. Materials and Design. 2012. Vol. 37. pp. 174–181.
14. Wang F.-Jie, Shuang Y.-Hua, Hu J.-Hua, Wang Q.-Hua. Explorative study of tandem skew rolling process for producing seamless steel tubes. Journal of Materials Processing Technology. 2014. Vol. 214. pp. 1597–1604.
15. Ovchinnikov D. V., Gorozhanin P. Yu., Bodrov A. Yu., Orlov G. A., Ashkanov S. E. Improved grooving of continuous tube-rolling mill. Stal. 2014. No. 9. pp. 50–52.
16. Orlov G. A., Gagarinov V. A., Bodrov A. Yu., Ustyantsev V. L., Ashkanov S. E. Investigation of end tube thickness variation after tuberolling unit with continuous mill. Stal. 2016. No. 8. pp. 55–57.

Language of full-text russian
Full content Buy