Journals →  Tsvetnye Metally →  2023 →  #1

Tsvetnye Metally



BENEFICIATION
ArticleName Flotation of copper smelter slags intensified by impact crushing
ArticleAuthors Gorlova O. E., Sinyanskaya O. M., Tusupbekova T. Sh., Kolodezhnaya E. V.
ArticleAuthorsData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia1IPKON, Russian Academy of Sciences, Moscow, Russia2:

O. E. Gorlova, Professor of the Department of Geology, Mine Surveying and Minerals Processing1, Leading Researcher2, Doctor of Technical Sciences, Associate Professor, e-mail: gorlova_o_e@mail.ru

 

IPKON, Russian Academy of Sciences, Moscow, Russia:

O. M. Sinyanskaya, Minerals Processing Specialist, Candidate of Technical Sciences, phone: +7 (701) 520-40-05

 

KazGidroMed, Karaganda, Kazakhstan:
T. Sh. Tusupbekova, Lead Engineer at the Minerals Processing Laboratory, phone: +7 (747) 694-33-26

 

IPKON, Russian Academy of Sciences, Moscow, Russia1 ; Ural Omega JSC, Magnitogorsk, Russia2:
E. V. Kolodezhnaya, Leading Researcher1, Research Engineer2, Candidate of Technical Sciences, phone: +7 (3519) 22-00-49, e-mail: kev@uralomega.ru

ArticleName Understanding the processes of thickening and filtration of yellow cake slurry (ammonium polyuranate) generated by in-situ uranium leaching sites
ArticleAuthors Tolkachev V. A., Maynikov D. V., Paskhin N. P., Meshkov E. Yu.
ArticleAuthorsData

Design & Survey and Research & Development Institute of Industrial Technology JSC, Moscow, Russia:

V. A. Tolkachev, Principal Specialist, Candidate of Technical Sciences
D. V. Maynikov, Head of the Laboratory, Candidate of Technical Sciences, e-mail: didima06@mail.ru
N. P. Paskhin (1930–2021)
E. Yu. Meshkov, Head of the Laboratory

NOBLE METALS AND ITS ALLOYS
ArticleName Advanced hydrometallurgical techniques applicable to gold-copper and copper-gold ores. Рractices adopted abroad
ArticleAuthors Meretukov M. A., Strukov K. I.
ArticleAuthorsData

Prague, Czech Republic:

M. A. Meretukov, Independent Expert, Professor, Doctor of Technical Sciences, e-mail: mamer@inbox.ru

 

UGC The Gold Mining Company, Plast, Russia:

K. I. Strukov, Company President, Doctor of Technical Sciences, e-mail: ugold@ugold.ru

ArticleName Full factorial design model applied for understanding the dissolution kinetics of iron being a part of arsenopyrite
ArticleAuthors Kuzas E. A., Karimov K. A., Rogozhnikov D. A.
ArticleAuthorsData

Laboratory of Advanced Technologies in Non-ferrous and Ferrous Metals Raw Materials Processing at the Institute of New Materials and Technologies, Ural Federal University named after the First President of Russia B. N. Yeltsin, Yekaterinburg, Russia:

E. A. Kuzas, Senior Researcher, Candidate of Technical Sciences, e-mail: e.kuzas@ya.ru
K. A. Karimov, Senior Researcher, Candidate of Technical Sciences
D. A. Rogozhnikov, Head of the Laboratory, Doctor of Technical Sciences

ArticleName Conditioning of POX slurry and its effect on pressure oxidation performance of refractory gold sulphide ore
ArticleAuthors Zavalyuev A. S., Rogozhnikov D. A., Fomenko I. V., Lyakh S. I.
ArticleAuthorsData

Pokrovskiy POX Hub, Pokrovskiy Rudnik JSC, Blagoveshchensk, Russia:

A. S. Zavalyuev, Chief Engineer, e-mail: zavaluev-a@pokrmine.ru

 

Laboratory of Advanced Technologies in Non-ferrous and Ferrous Metals Raw Materials Processing at the Institute of New Materials and Technologies, Ural Federal University named after the First President of Russia B. N. Yeltsin, Yekaterinburg, Russia:

D. A. Rogozhnikov, Head of the Laboratory, Doctor of Technical Sciences, e-mail: darogozhnikov@yandex.ru

 

R&D Centre for Hydrometallurgy LLC, Saint Petersburg, Russia:
I. V. Fomenko, General Director, Candidate of Technical Sciences, e-mail: fomenko-i@gidrometall.ru
S. I. Lyakh, Chief Engineer, Candidate of Technical Sciences, e-mail: lyakh-s@gidrometall.ru

LIGHT METALS, CARBON MATERIALS
ArticleName Hydrogarnet process as a modern approach to hydrometallurgical alkaline processing of low-grade bauxites. Review
ArticleAuthors Medvedev V. V., Akhmedov S. N., Lipin V. A.
ArticleAuthorsData

Alyumproekt LLC, Saint Petersburg, Russia:

V. V. Medvedev, Chief Engineer, Candidate of Technical Sciences
S. N. Akhmedov, General Director, Candidate of Technical Sciences

 

Higher School of Technology and Energy, Saint Petersburg State University of Industrial Technologies and Design, Saint Petersburg, Russia:

V. A. Lipin, Head of the Department of Physical and Colloid Chemistry, Doctor of Technical Sciences, Associate Professor, e-mail: vadim.lipin@km.ru

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Cleaning of fine tungsten wire before gold electroplating
ArticleAuthors Solonin M. D., Asnis N. A., Grigoryan N. S., Vagramyan T. A.
ArticleAuthorsData

D.Mendeleev University of Chemical Technology of Russia, Moscow, Russia:

M. D. Solonin, Postgraduate Student at the Department of Innovative Materials and Corrosion Protection, e-mail: soloninmixa@gmail.com
N. A. Asnis, Lead Engineer at the Department of Innovative Materials and Corrosion Protection, Candidate of Technical Sciences, e-mail: asnis@mail.ru
N. S. Grigoryan, Professor at the Department of Innovative Materials and Corrosion Protection, Associate Professor, Candidate of Chemical Sciences, e-mail: ngrig108@mail.ru
T. A. Vagramyan, Head of the Department of Innovative Materials and Corrosion Protection, Professor, Doctor of Technical Sciences, e-mail: vagramyan@muctr.ru

MATERIALS SCIENCE
ArticleName Corrosive effect of powder and granular fluxes on structural materials
ArticleAuthors Duyunova V. A., Kozlov I. A., Kuzin Ya. S., Piskarev D. V.
ArticleAuthorsData

All-Russian Institute of Aviation Materials of the State Science Centre of the Russian Federation, Moscow, Russia:

V. A. Duyunova, Head of Research Department “Titanium, Magnesium, Beryllium and Aluminium Alloys”, Candidate of Technical Sciences
I. A. Kozlov, Deputy Head of Research Department “Functional Materials and Technology of Synthesis”, Candidate of Technical Sciences

Ya. S. Kuzin, Category 2 Engineer at the Laboratory for Corrosion and Protection of Metallic Materials

 

Ikoraf LLC, Moscow, Russia.
D. V. Piskarev, Director Responsible for Research and Technology, Candidate of Technical Sciences, e-mail: piskarev@ikoraf.com

ArticleName Understanding the effect of basalt fibres on the structure and physical and mechanical properties of aluminium alloy AK9
ArticleAuthors Valikhov V. D., Zhukov I. A., Kakhidze N. I., Tkachev D. A.
ArticleAuthorsData

National Research Tomsk State University, Tomsk, Russia:

V. D. Valikhov, Research Engineer at the High-Energy and Special Materials Research Laboratory, e-mail: valihov.snobls@gmail.com
I. A. Zhukov, Head of the Laboratory for Metallurgy Nanotechnologies, Doctor of Technical Sciences
N. I. Kakhidze, Research Engineer at the Laboratory for Metallurgy Nanotechnologies
D. A. Tkachev, Junior Researcher at the Laboratory for Metallurgy Nanotechnologies

ArticleName Processability and structural evolution of round ingots of Al – 2 % Cu – 2 % Mn alloy during forming
ArticleAuthors Belov N. A., Cherkasov S. O., Korotkova N. O., Tsydenov K. A.
ArticleAuthorsData

National University of Science and Technology MISiS, Moscow, Russia:

N. A. Belov, Professor at the Department of Metal Forming, Doctor of Technical Sciences, e-mail: nikolay-belov@yandex.ru
S. O. Cherkasov, Postgraduate Student at the Department of Metal Forming
N. O. Korotkova, Engineer at the Department of Metal Forming, Candidate of Technical Sciences
K. A. Tsydenov, Master’s Student at the Department of Metal Forming

Journals →  Tsvetnye Metally →  2023 →  #1