Journals →  Chernye Metally →  2019 →  #12

Chernye Metally


 

The December issue of the journal is opened by the section devoted to the 85th anniversary of the Magnitogorsk State Technical University named after G. I. Nosov. The strategy and tactics of development of the higher educational institute as a basic university, its successes in international rankings, the educational space, achievements in research and student self-government have been presented. A large article is devoted to development of scientific schools in the field of metal processing at the MSTU, experience in the field of professional training in higher education at all levels. Of particular interest is the article telling about the internal control system, the principles of monitoring controls, the features of formation of this system in iron and steel corporations. An improved method for creating conditions for implementation of extremely optimizing control of natural gas supply, which does not require capital expenditures, was also proposed. The technology of production of ultra-low-sulfur pipe steel with a sulfur content of less than 0.0015% for production of longitudinally electric welded large-diameter pipes of high strength was described. The research results showing the high performance properties of the SHS-U lubricant were presented. This section includes a color insert dedicated to the anniversary of V. M. Kolokoltsev.

 

The “Rolling and other metal forming processes” section is opened by the interview with A. S. Aleshchenko, head of the NUST “MISiS”,metal forming chair dedicated to the 100th anniversary of the MISiS metal forming scientific school. A technique is proposed for determining the final value of the pipe wall thickness during plugless rolling in a wide range of total reduction values.

 

The “Coating and surface corrosion” section presents the technology of comprehensive protection of pipelines using silicate materials, which can significantly reduce the production costs of enameled steel pipes.

 

The "Heating and heat treatment" section is devoted to the possibilities of using the mathematical package MathematСonnnex for the thermotechnical calculation of heating furnaces.


The “Additive technologies” section analyzes one of the approaches to model selective laser melting of particles from the point of view of its practical application.

 

From the publication in the "Engineering Technologies" section the readers get to know about the modernization of the mechanism for raising the side rolls of the four-roll bending machine of the mechanical workshop of JSC Ural Steel, due to which its operational characteristics have increased.

 

The "Personnel Policy" section describes the training of specialists in metallurgy metrology based on the Federal State Educational Standard of Higher Professional Education in the various areas.

 

The "From the History of Metallurgy" section contains material telling about A. A. Auerbach, dedicated to the 175th anniversary of his birth.

 

In the “Chronicle” section, a meeting of the Federal Educational and Methodological Association in the system of higher education according to the enlarged group of specialties and training areas “Materials Technology” (UGSN 22.00.00) is highlighted.

 

By tradition, Thematic content of the journal for 2019 closes the issue.

 

Please find more details below, or order your printed or electronic version of the Journal.


85th anniversary of Nosov Magnitogorsk State Technical University
ArticleName Magnitogorsk scientific school in the field of metal forming
ArticleAuthors G. S. Gun, E. M. Golubchik, M. A. Polyakova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

G. S. Gun, Dr. Eng., Prof., Rector Advisor, e-mail: g.gun@magtu.ru
E. M. Golubchik, Dr. Eng., Associate Prof., Dept. of Material Processing, e-mail: golubchik@magtu.ru
M. A. Polyakova, Dr. Eng., Prof., Dept. of Material Processing, e-mail: m.polyakova@magtu.ru

ArticleName Internal control system in iron and steel corporations: development challenges and prospects
ArticleAuthors V. M. Kolokoltsvev, T. V. Kozlova, E. S. Zambrzhitskaya, K. N. Vdovin
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. M. Kolokoltsev, Dr. Eng., Prof., President, e-mail: kwm@magtu.ru
T. V. Kozlova, Cand. Eng., Associate Prof., Head of Dept. of Book Accounting and Economical Analysis, e-mail: twkozlova@mail.ru
E. S. Zambrzhitskaya, Cand. Eng., Associate Prof., Dept. of Book Accounting and Economical Analysis, e-mail: jenia-v@yandex.ru
K. N. Vdovin, Dr. Eng., Prof., Dept of Foundry Production and Material Processing, e-mail: vdovin@magtu.ru

ArticleName Extremely optimized control by natural gas supply to minimize coke costs and increase productivity of the blast furnace process
ArticleAuthors B. N. Parsunkin, A. S. Savinov, I. E. Illarionov, M. V. Afanaseva
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

B. N. Parsunkin, Dr. Eng., Prof., Dept. of Automatic Control Systems
A. S. Savinov, Dr. Eng., Associate Prof., Head of Dept. of Mechanics, Director of Metallurgy, Mechanical Engineering and Materials Processing Institute, e-mail: savinov_nis@mail.ru

M. V. Afanasyeva, Senior Lecturer, Dept of Informatics and Information Security

 

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):
I. E. Illarionov, Dr. Eng., Prof, Head of the Chair “Materials Science and Metallurgical Processes”, e-mail: tmilp@rambler.ru

ArticleName Technology for production of pipeline ultra low sulfur steel
ArticleAuthors A. N. Ushakov, V. A. Bigeev, A. N. Stolyarov, M. V. Potapova
ArticleAuthorsData

Magnitogorsk Iron and Steel Works (Magnitogorsk, Russia):

A. N. Ushakov, Deputy General Director on Production;

 

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
V. A. Bigeev, Dr. Eng., Prof.
A. N. Stolyarov, Dr. Eng., Prof.
M. V. Potapova, Cand. Eng., Associate Prof., e-mail: marina_potapova8@mail.ru

ArticleName Affect of dry lubricant properties on quality surface of cold drawn sized steel with special finishing
ArticleAuthors A. G. Korchunov, G. S. Gun, M. A. Polyakova, K. G. Pivovarova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. G. Korchunov, Dr. Eng., Prof., Vice-Rector on International Affairs, Head of the Dept. of Engineering and Operation of Metallurgical Equipment, e-mail: international@magtu.ru
G. S. Gun, Dr. Eng., Prof., Rector Advisor, e-mail: g.gun@magtu.ru
M. A. Polyakova, Dr. Eng., Prof., Dept. of Material Processing, e-mail: m.polyakova@magtu.ru
K. G. Pivovarova, Cand. Eng., Associate Prof., Dept. of Material Processing, e-mail: kgpivovarova@gmail.com

Rolling and other Metal Forming Processes
ArticleName Effect of plugless deformation in screw rolling three-roll mill on the change of tube wall thickness
ArticleAuthors A. S. Budnikov, E. A. Kharitonov, A. S. Aleshchenko, R. V. Iskhakov
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow Russia):

A. S. Budnikov, Assistant, Post-graduate., Metal Forming Dept., e-mail: fiar128@yandex.ru
E. A. Kharitonov, Cand. Eng., Associate Prof., Senior Researcher, Metal Forming Dept., e-mail: haritonov45@mail.ru
A. S. Aleshchenko, Cand. Eng., Head of Metal Forming Dept., e-mail: judger85@mail.ru

 

Pervouralsk New Tube (Novotrubny) Works (Pervpuralsk, Russia):
R. V. Iskhakov, Leading Engineer Technologist, e-mail: iskhakov@chelpipe.ru

Coating and Corrosion Protection
ArticleName Development of fiber-glass composite coatings for protection of steel oil pipelines from internal and external corrosion
ArticleAuthors E. A. Yatsenko, A. V. Ryabova, B. M. Goltsman
ArticleAuthorsData

Platov South Russian State Polytechnic University (Novocherkassk, Russia):

E. A. Yatsenko, Dr. Eng., Prof., Head of “General Chemistry and Technology of Silicates” Dept., e-mail: e_yatsenko@mail.ru
A. V. Ryabova, Cand. Eng., Associate Prof., “General Chemistry and Technology of Silicates” Dept., e-mail: annet20002006@yandex.ru
B. M. Goltsman, Cand. Eng., Associate Prof., “General Chemistry and Technology of Silicates” Dept., e-mail: boriuspost@gmail.com

Heating and Heat Treatment
ArticleName Usage of the MathConnex mathematical package for thermotechnical calculation of heating furnaces
ArticleAuthors O. B. Kryuchkov, N. I. Gabelchenko, P. I. Malenko, L. G. Saranin
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

O. B. Kryuchkov, Cand. Eng., Deputy Dean, e-mail: bardb@mail.ru
N. I. Gabelchenko, Cand. Eng., Associate Prof., e-mail: natalya-ig@rambler.ru

 

Tula State University (Tula, Russia):
P. I. Malenko, Cand. Eng., Associate Prof., e-mail: malenko@tsu.tula.ru
L. G. Saranin, Graduate Student, e-mail: saranin53@mail.ru

Additive Technologies
ArticleName About one approach to modeling selective laser melting of particles
ArticleAuthors O. I. Boriskin, E. V. Larkin, G. V. Markova, A. N. Privalov
ArticleAuthorsData

Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Head of the Dept. of Instrumental and Metrological Systems, Director of Polytechnic Institute
E. V. Larkin, Dr. Eng., Prof., Head of the Dept. “Robotechnics and Production Automation”, e-mail: elarkin@mail.ru
G. V. Markova, Dr. Eng., Prof., Head of the Dept. “Metal Physics and Material Science”

 

Tula State Pedagogic University (Tula, Russia):
A. N. Privalov, Dr. Eng., Prof., e-mail: privalov.61@mail.ru

Engineering Technologies
ArticleName Improvement of operational reliability of a sheet bending four-roller machine of JSC Ural Steel
ArticleAuthors A. V. Nefedov, K. S. Krasov, N. A. Chichenev
ArticleAuthorsData

National University of Science and Technology “MISiS” — Novotroitsk Affiliate (Novotroitsk, Russia):

A. V. Nefedov, Cand. Ped., Associate Prof., Deputy Director on Teaching and Guiding, e-mail: cosnovotr@rambler.ru
K. S. Krasov, Graduate, e-mail: nfmisis@yandex.ru
N. A. Chichenev, Dr. Eng., Prof., Dept. of Technological Equipment Engineering, e-mail: chich38@mail.ru

HR Policy
ArticleName About one approach to modeling selective laser melting of particles
ArticleAuthors O. I. Boriskin, S. N. Larin, M. A. Anisimova, G. A. Nuzhdin
ArticleAuthorsData

Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Head of the Dept. of Instrumental and Metrological Systems, Director of Polytechnic Institute
S. N. Larin, Dr. Eng., Prof., Deputy Director of Polytechnic Institute
M. A. Anisimova, Cand. Eng., Associate Prof.

 

National University of Science and Technology “MISiS” (Moscow, Russia):
G. A. Nuzhdin, Cand. Eng., Associate Prof., E-mail: nuzhdin65@mail.ru

Journals →  Chernye Metally →  2019 →  #12