Journals →  Chernye Metally →  2019 →  #12 →  Back

HR Policy
ArticleName Training of metrology specialists in metallurgy
ArticleAuthor O. I. Boriskin, S. N. Larin, M. A. Anisimova, G. A. Nuzhdin

Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Head of the Dept. of Instrumental and Metrological Systems, Director of Polytechnic Institute
S. N. Larin, Dr. Eng., Prof., Deputy Director of Polytechnic Institute
M. A. Anisimova, Cand. Eng., Associate Prof.


National University of Science and Technology “MISiS” (Moscow, Russia):
G. A. Nuzhdin, Cand. Eng., Associate Prof., E-mail:


Metrological support of metallurgical and machine-building production significantly defines increase in safety and competitiveness of metallurgical products. The competent staff on metallurgical production has to have a complex of knowledge in the field of metallurgy and technology of mechanical engineering and the practical skills of work necessary for the solution of professional tasks. Therefore for implementation of requirements for quality management of metallurgical products, to metrological support and the required reliability at the metallurgical enterprise analysed the existing standards regarding confi rmation of coherence of requirements. For carrying out the analysis federal state educational standards of the higher education in the different directions of preparation, all levels (a bachelor degree, a magistracy and a specialist programme), various orientations (profiles) and specializations are selected. Allocated for the comparative analysis of competence, belonging to metallurgy and metallurgical metals and alloys products regarding metrological support. Subsequently systemically analyzed coherence of these requirements and provisions of national standards of the state system of ensuring unity of measurements (GSOEI) and the professional standard of the expert in metrology. The received analytical results were used during the developing, approbation and introduction of the program of professional retraining of employees of the metallurgical and machine-building industry. It was revealed that creation of the program of increase in qualification by the modular principle is more productive. Because of a signifi cant role of structure of metals and alloys in metallurgy, and her behavior all repartitions, included the subjects "Defects of Casting and Methods of Their Detection» and "Defects of OMD and Methods of Their Detection" with obligatory illumination of the questions connected with measuring devices and devices of automatic control in the working program of the corresponding module. Also surely included the subject "The Main Activities in the fi eld of Metrological Support of the Metallurgical Enterprise" in this or other corresponding module of the working program. In the annex to the developed and implemented programs surely gave examples of estimated materials for carrying out both intermediate, and a fi nal assessment of listeners.

keywords Metallurgical production, metrological support, educational standard of the higher education, national standard, professional standard, professional development, estimated materials, module

1. Higher Attestation Commission. Passports of scientific specialties. [Electronic resource]. Available at:
2. GOST R 8.820-2013. GSOEI. Metrological assurance. General. Moscow: Standartinform, 2014. 16 p.
3. Kolokoltsev V. M., Solovyev V. P., Pereskokova G. А. Metallurgy in XXI century: challenges, personnel prospects. Chernye Metally. 2019. No. 3. pp. 6–12.
4. Bayburin A. Kh. Kocharin N. V., Ulrikh D. V. Improvement of master programs in the fi eld “Construction” for teaching innovative thinking skills. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Stroitelstvo i arkhitektura. 2018. Vol. 18. No. 2. pp. 70–76.
5. Mitin О. N., Nuzhdin G. А., Nguen К. Kh. Simulation of the crimping operation with thinning of thick-walled pipe billets. Izvestiya TulGU. Seriya. Tekhnicheskie nauki. 2014, Iss. 5. pp. 57–65.
6. Byshov N. V., Borychev S. N., Rembalovich G. K. et al. Theoretical Studies of the Damage Process of Easily Damaged Products in Transport Vehicle Body During the On-Farm Transportation. ARPN Journal of Engineering and Applied Sciences. 2018. Vol. 13. No. 10. pp. 3502–3508.
7. Ivanov V. V., Merkulova V. A. Application of (CAD) Modeling in Selection of Open Cast Mining Machines for Complex Structure Ore Deposits in Training of Mining Engineers. Eurasian Journal of Analytical Chemistry. 2017. Vol. 12. No. 7b. pp. 1153–1158.
8. Cwudziński A. Numerical and physical modeling of liquid steel behavior in one strand tundish with gas permeable barrier. Archives of Metallurgy and Materials. 2018. Vol. 63. No. 2. pp. 589–596.
9. Makhmudova I. N. Methodology for assessing staff competencies to determine compliance with professional standards. Nauchnoe obozrenie: teoriya i praktika. 2017. No. 1. pp. 59–74.
10. Zhang X., Deng Y., Zhang Y. Development of High Strength Aluminium Alloys and Processing Techniques for the Materials. Jinshu Xuebao. 2015. Vol. 51. No. 3. pp. 257–271.
11. Singh S., Singh R. Precision Investment Casting: a State of Art Review and Future Trends. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2016. Vol. 230. No. 12. pp. 2143–2164.
12. Kolokoltsev V. М., Pavlov S. N. The role of high school image in preparation of the specialists with leadership managing skills for industrial and business enterprises. Chernye Metally. 2018. No. 5. pp. 54–60.
13. Tregubov V. I., Blagoveshchenskiy D. I., Nuzhdin G. А., Larina М. V. Metrological monitoring of articles obtained by a rotary drawing. Izvestiya Tulskogo gosudarstvennogo universiteta. Seriya: Tekhnicheskie nauki. Tula: Izdatelstvo TulGU. 2017. No. 1. pp. 193–200.
14. GOST R 56069-2018. Requirements for experts and specialists. Verifier of measuring instruments. General requirements. Moscow: Standartinform, 2018, 10 p.
15. Hainsworth S. V. Critical assessment: forensic metallurgy — the difficulties. Materials Science and Technology. 2017. Vol. 33. No. 14. pp. 1553–1559.
16. Boriskin O. I., Nuzhdin G. A., Khunuzidi E. I., Blagoveshchenskiy D. I. The Conformity Assesment of Metamaterials Quality Management. CIS Iron and Steel Review. 2019. Vol. 17. pp. 53–57.
17. Order of the Ministry of Labor dated June 29, 2017 No. 526n “On approval of the professional standard “Specialist in Metrology”. Registered in the Ministry of Justice of Russia 24.07.2017 No. 47507. Available at:
18. Dontsova I. I., Kasyanov I. А., Mokrousov А. А., Pitryuk V. А. Expert study of metals and alloys. Typical expert methods for research of material evidence. Part II. Edited by Semyonov А. Yu. General edition by Martynov V. V., Candidate of Engineering Sciences. Moscow: EKTs MVD Rossii, 2012. pp. 656–664.
19. "Standardization and Metrology". FSBEI HPE "National Mineral Resources University "Gorny". Approved by the Academic Council 20.12.2013, protocol No. 5.
20. Bazunov А. V., Nikulin S. А., Razumeyko B. G. Melnikov А. L., Mortishcheva А. А., Nuzhdin G. А. Device for rating education level of students to be admitted to high school. Patent RF. No. 2145442. 2000. Bulletin No. 4.
21. Song Y. L., Li C. S., Li B. Z., Han Y. H. Microstructure characterization of Fe–21Cr–15Ni–Nb–V non-magnetic austenitic stainless steel during hot deformation. Materials Science and Technology. 2018. Vol. 34. No. 14. pp. 1639–1648.

Language of full-text russian
Full content Buy