Journals →  Obogashchenie Rud →  2012 →  #6

Obogashchenie Rud



Tzolo Voutov – a representative from Bulgaria, the president of the “Geotechmin” Holding – became member of the editorial board of the journal “Obogashchenie Rud”. His biography and merits in the scientific and public activities are briefly described in this issue of the journal.

 

The section “Processing Technology” includes most articles of this issue, and describes the new and improved technologies of ferrous and base metals processing, as well as those of diamond-bearing materials treatment with a view to provide diamonds recovery. In the article “Prospects of iron ore concentrate grade increase at ОАО “Karelsky Okatysh” by V. А. Dyubchenko et al. it is shown, that final processing on ”Stack Sizer” Derrick screens with processing regime parameters correction will permit to produce iron ore concentrates at ОАО “Karelsky Okatysh”, suitable for production of DRI pellets, which will be in keeping with the currently employed tendencies in the world ferrous metallurgy. Processing technology was developed for processing the Nurkazgan deposit West areasulfide copper ore, low in copper, gold and silver content (the article byOtrozhdyonnova L. A. et al.). As a result of simple flow sheet and flotation regime application, high-grade copper concentrate was produced with high recovery of copper (92 %), gold (70.5 %) and silver (81.4 %). The article “The “ALROSA” Diamondsmarketable products’ quality increase through improvement of technology of diamonds liberation” (byKarnatskiy V. A. et al.) is devoted to the issue of decreasing diamonds damaging in diamond ore mining and processing. To achieve that, it is recommended to decrease to a maximum degree liberated diamonds retention time in wetautogenous grinding mills, optimize mills drums’rotating speed regimes, apply preservation technologies for ground ore transportation, optimize design parameters of mills discharge grates and autogenous grinding water regimes.

 

In an article (byVasilkov V. B. et al.) in the section, dedicated tofundamental research, gas bubble motion in viscous incompressible liquid in horizontally oscillating vessel is theoretically and experimentally investigated, taking into consideration bubble’s proper compressibility. Anapproximate expression has been obtained for average velocity of bubble’s motion in liquid, its relationship to bubble radius and vibration parameters has been established. The results, obtained in this study, may be of interest for development of the theory of vibrational methods and technologies to be employed in beneficiation processes, in particular, flotation process. Aniterativecalculation model is proposed for sands circulation computation in respect of ball mills, operating in locked cycle with classifier (the article byMalyshev V. P. et al.). It is shown, that return of sands does not immediately bring mill in stationary regime, that stationary regime is achieved in 15-20 cycles, depending on time of material retention in mill, feed ore size fractioncomposition, conditions of product separation into overflow and sands, and regime of mill’s operation.

 

An article (bySapozhnikov А. I., Golovanov А. V.) in the section “Equipment” considers a promising direction in disintegration technology improvement. The authors substantiate thealgorithm of combining crushing and grinding stages in one working chamber. The cone crusher-mill design has been proposed, providing for realization of proposed rock disintegration algorithm. The crusher-millproduction prototype testing results verified a high degree of grinding and low energy consumption of prototype.

 

An article (byArsentyev V.A. et al.) in the section “Processing of secondary raw materials”, considers special features of a technology developed for production of granulatedaggregate for concretes using screenings’ dust fractions, obtained in crushed stone production, and describes the properties of such aggregate. This technology will be realized in a presently constructed pilot plant complex, providing for utilization of primary waste resulting frominert nonmetallic minerals.


More details about the issue you can find below or book printed or electronic version of the journal.


ORE DRESSING
ArticleName Prospects of inertia crushers application in consolidating stowing mixes preparation technology
ArticleAuthors Arsentyev V. А., Mikhaylova N. V., Zverev A. P.
ArticleAuthorsData

REC «Mekhanobrtekhnika» (Russia):

Arsentyev V. A., Research and Development Director, Doctor of Engineering, secretariat@npkmt.spb.ru

Mikhaylova N. V., Production Manager, Ph. D. in Technical Sciences, mikhailova_nv@npkmt.spb.ru

 

Uchalinskiy GOK (Russia):

Zverev A. P., Mining Engineer, upr_zverev_ap@ugok.ru

BENEFICIATION TECHNOLOGY
ArticleName Prospects of iron ore concentrate grade increase at ОАО «Karelsky Okatysh»
ArticleAuthors Dyubchenko V. А., Patkovskaya N. А., Tasina Т. I.
ArticleAuthorsData

Mekhanobr Engineering JSC (Russia):

Dyubchenko V. A., Project Director

Patkovskaya N. A., Chief Specialist, Ph. D. in Technical Sciences

Tasina T. I., Senior Researcher

E-mail (common): office@mekhanobr.spb.ru

ArticleName The «ALROSA» marketable products' quality increase through improvement of technology of diamonds liberation
ArticleAuthors Karnatskiy V. A., Savitskiy L. V., Imangulov S. V., Bondarenko I. F., Timoshenko N. V.
ArticleAuthorsData

ALROSA OJSC (Russia):

Karnatskiy V. A., Chief Metallurgist, Head of Department, KarnatskyVA@alrosa.ru

 

Institute «Yakutniproalmaz», ALROSA OJSC (Russia):

Savitskiy L. V., Head of Laboratory, Ph D, SavitskyLV@alrosa.ru

Imangulov S. V., Head of Department, Imangulovsv@alrosa.ru

Bondarenko I. F., Academic Secretary, Ph D, BondarenkoIF@alrosa.ru

Timoshenko N. V., Junior Reseacher

ArticleName The Nurkazgan deposit West area sulfide copper ore processing technology development
ArticleAuthors Otrozhdyennova L. A., Akkerman Yu. E., Kuchayev V. A., Aksyenova G. Ya., Zavarina R. I.
ArticleAuthorsData

Mekhanobr Engineering JSC (Russia):

Otrozhdyennova L. A., Leading Researcher, Ph. D. in Technical Sciences

Akkerman Yu. E., Leading Researcher, Ph. D. in Technical Sciences

Kuchayev V. A., Leading Researcher, Ph. D. in Technical Sciences

Aksyenova G. Ya., Leading Researcher, Ph. D. in Mineralogy

Zavarina R. I., Researcher

E-mail (common): office@mekhanobr.spb.ru

THEORY OF PROCESSES
ArticleName Motion of gas bubble in horizontally oscillating vessel with liquid
ArticleAuthors Vasilkov V. B., Demidov I. V., Sorokin V. S.
ArticleAuthorsData

REC «Mekhanobr-Тekhnika», Institute of Problems of Mechanical Engineering of RAS (Russia):

Vasilkov V. B., Leading Researcher

 

Saint-Petersburg State Institute of Technology (Technical University) (Russia):

Demidov I. V., Student

 

REC «Mekhanobr-Тekhnika», Institute of Problems of Mechanical Engineering of RAS (Russia):

Sorokin V. S., Senior Researcher, slavos87@mail.ru

ArticleName Consideration of sands circulation in probabilistic model of ore grinding
ArticleAuthors Malyshev V. P., Turdukozhayeva А. М., Kaykenov D. А.
ArticleAuthorsData

Chemical and Metallurgical Institute named after Zh. Abishev (Republic of Kazakhstan):

Malyshev V. P., Head of Laboratory, Doctor of Engineering

Turdukozhayeva А. М., Chief Researcher, Doctor of Engineering

E-mail (common): eia_hmi@mail.ru

 

Karaganda State University named after E. A. Buketov (Republic of Kazakhstan):

Kaykenov D. А., Researcher

EQUIPMENT
ArticleName Vibrating sizing screen prototype model main operating parameters study
ArticleAuthors Romashev А. О., Trofimov V. А.
ArticleAuthorsData

REC «Mekhanobr-tekhnika» (Russia):

Romashev А. О., Engineer, art3m@mail.ru

Trofimov V. А., Chief Trend Designer

ArticleName A cone crusher-mill — a promising direction in disintegration technology improvement
ArticleAuthors Sapozhnikov А. I., Golovanov А. V.
ArticleAuthorsData

Scientifictechnical firm «Special ships equipment and deep water engineering» Ltd (Russia):

Sapozhnikov А. I., Chief Designer, aisapojnikov@yandex.ru

 

ZAO RIVSproekt (Russia):

Golovanov А. V., Engineer

SECONDARY RAW MATERIAL PROCESSING
ArticleName Nonmetallic minerals dust fractions utilization
ArticleAuthors Arsentyev V. A., Bernshtein L. G., Kutolin V. A., Shuloyakov A. D.
ArticleAuthorsData

Interstroyproekt (Russia):

Arsentyev V. A., Deputy General Director, Doctor of Engineering, interstroyproekt@mail.ru  

 

Research and Testing Center «GiproCement Science and Quality Control» Ltd (Russia):

Bernshtein L. G., General Director, LBERN269@yandex.ru

 

Interstroyproekt (Russia):

Kutolin V. A., Chief Process Engineer, Doctor of Mineralogy, interstroyproekt@mail.ru

Shuloyakov A. D., General Director, Ph. D. in Technical Sciences, interstroyproekt@mail.ru

ArticleName Determination of vibrofluidized bed plants parameters regarding stone crushing screenings classification and dustremoval
ArticleAuthors Sizikov S. А., Vyatkin G. М., Skripilov А. P., Shuloyakov A. D.
ArticleAuthorsData

NIPKB Stroitehnika CJSC (Russia):

Sizikov S. А., General Director, Ph. D. in Technical Sciences, Vyatkin G. М., Deputy General Director on Marketing

Skripilov А. P., Junior Researcher

E-mail (common): stroitehnika@mail.ru

 

Interstroyproekt (Russia):

Shuloyakov A. D., General Director, Ph. D. in Technical Sciences, interstroyproekt@mail.ru

DESIGNING
ArticleName Useful models of concentrating plants: from development to implementation
ArticleAuthor Smirnov А. N.
ArticleAuthorData

«Mekhanobr Engineering» CJSC (Russia):

Smirnov А. N., First Deputy General Director, ansmirnov@mekhanobr.spb.ru

ArticleName News
ArticleName New foreign member of the editorial board is introduced
Journals →  Obogashchenie Rud →  2012 →  #6