Chernye Metally
The «Chernye Metally» journal No. 4-2022 has been published.
The issue of the journal is headed with the Iron Production section, which presents an article written by the authors of NUST MISiS devoted to the effectiveness of using a heat-insulating insert in the air duct of a blast tuyere using mathematical modeling.
The next «Steel production» section with a publication on the development of clock models and their application for the modernization of an electric steel shop will be of interest for readers. The team of authors is represented by specialists from the Tomsk Polytechnic University, Yurga Technological Institute and the Moscow State University of Civil Engineering.
In the «Foundry» section, the authors from the Nizhny Novgorod State Technical University named after R. E. Alekseev examined the composition and tested a liquid-moving self-hardening mixture of improved manufacturability for the manufacture of molds and steel casting cores. In the same section, the article written by specialists from the Siberian Federal University is published on the possibility of using graphite-containing sludge from an aspiration gas purification system in the production of cryptocrystalline graphite as part of a self-drying non-stick coating.
In the «Rolling and Heat Treatment» section, a team of authors from the Metal Forming chair of the Ural Federal University presents a continuation of their article on optimizing roll calibrations for channel rolling (the 1st part was published in the «Chernye Metally» journal, No. 9, 2019).
An interesting article is presented in the «Chemical Technologies» section, devoted to the study of the kinetic features of the chromium dissolution in an acid electrolyte.
In the “Coating and surface treatment” section, possible causes of defects during the deposition and subsequent heat treatment of nickel-phosphorus coatings containing dispersed silicon carbides on steel sheets with a thickness of 65–180 mm are studied.
The same issue presents publications in the sections «Energy and Ecology» and «Engineering Technologies».
The same issue contains a commemorative article dedicated to the 85th anniversary of Gennady Nikolaevich Yelansky, who passed away last year.
Please find more details below, or order your printed or electronic version of the Journal.
| Production of Cast Iron | |
| ArticleName | Development of a heat-insulating insert in the blast channel of the blast furnace air tuyere using mathematical modeling |
| ArticleAuthors | K. V. Goloshchapov, O. A. Kobelev, A. E. Titlyanov, R. Yu. Kazbekov |
| ArticleAuthorsData | National University of Science nd Technology “MISiS”, Moscow, Russia: K. V. Goloshchapov, Postgraduate Student, Dept. of Technological Equipment Engineering, e-mail: goloshchapov.k@gmail.com
National University of Science nd Technology “MISiS”, Moscow, Russia1 ; “Central Research Institute for Engineering Technology” RF State Scientific Center, Moscow, Russia2: O. A. Kobelev, Dr. Eng., Professor, Dept. of Technological Equipment Engineering1, Chief Specialist2 |
| Pipe Production | |
| ArticleName | Development and application of normative timing models for the modernization of an electric steel-smelting shop |
| ArticleAuthors | R. A. Gizatulin, A. I. Musatova, N. V. Martyushev, D. V. Valuev, A. I. Karlina |
| ArticleAuthorsData | Siberian State Industrial University, Novokuznetsk, Russia: R. A. Gizatulin, Dr. Eng., Associate Professor, Professor Dept. of Nonferrous Metallurgy and Chemical Technology, e-mail: gizatulin_ra@sibsiu.ru
National Research Tomsk Polytechnic University, Tomsk, Russia:
Yurga Technological Institute (branch) of the National Research Tomsk Polytechnic University, Yurga, Russia:
Moscow State University of Civil Engineering, Moscow, Russia: |
| Foundry Production | |
| ArticleName | Liquid self-hardening mixture of improved technology for manufacture of molds and cores of steel castings |
| ArticleAuthors | I. O. Leushin, A. N. Grachev, L. I. Leushina, P. M. Yavtushenko |
| ArticleAuthorsData | Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia: I. O. Leushin, Dr. Eng., Professor, Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru |
| ArticleName | Use of graphite-containing sludge in the composition of non-stick coatings |
| ArticleAuthors | T. R. Gilmanshina, A. A. Kovaleva, S. A. Khudonogov, D. Yu. Kritsky |
| ArticleAuthorsData | Siberian Federal University, Krasnoyarsk, Russia: |
| Rolling and Heat Treatment | |
| ArticleName | Optimization of roll calibrations for beam channel rolling. Part 2. Space of channel gauges |
| ArticleAuthors | D. L. Shvartz, A. M. Mikhailenko, E. I. Salikhyanova |
| ArticleAuthorsData | Ural Federal University, Ekaterinburg, Russia: D. L. Shvartz, Dr. Eng., Associate Professor, Dept. of Metal Forming |
| ArticleName | Experimental and computational study of the equivalent thermal conductivity coefficient when heating a strip coil |
| ArticleAuthors | O. B. Kryuchkov, A. V. Krokhalev, P. I. Malenko, E. V. Sedov |
| ArticleAuthorsData | Volgograd State Technical University, Volgograd, Russia: O. B. Kryuchkov, Cand. Eng., Associate Professor, Deputy Dean, e-mail: bardb@mail.ru
Tula State University, Tula, Russia: P. I. Malenko, Cand. Eng., Associate Professor, Dept. of Welding, Casting and Technology of Structural Materials, e-mail: malenko@tsu.tula.ru |
| Chemical Technologies | |
| ArticleName | Features of the anodic behavior of chromium in an acidic electrolyte |
| ArticleAuthors | I. V. Skvortsova, E. A. Eliseeva, S. L. Berezina, V. S. Boldyrev |
| ArticleAuthorsData | Omsk State Pedagogical University, Omsk, Russia: I. V. Skvortsova, Cand. Chem., Associate Professor, Dept. of Chemistry and Methods of Teaching Chemistry, e-mail: i_dorovskih@mail.ru
Bauman Moscow State Technical University, Moscow, Russia:
Bauman Moscow State Technical University, Moscow, Russia1 ; Mendeleev University of Chemical Technology of Russia, Moscow, Russia2: |
| Coating and Surface Treatment | |
| ArticleName | Structure, properties and quality of a composite nickel-phosphorus coating deposited on steel substrates of various compositions |
| ArticleAuthors | Yu. N. Goykhenberg, D. S. Polukhin |
| ArticleAuthorsData | South Ural State University, Chelyabinsk, Russia: Yu. N. Goykhenberg, Cand. Eng., Professor, Senior Researcher, Dept. of Materials Science and Physical Chemistry of Materials, e-mail: goikhenbergyn@susu.ru
Scientific and Technical Center KONAR Ltd., Chelyabinsk, Russia: |
| Energy and Ecology | |
| ArticleName | Fuel and energy balance of electrometallurgical mini-complex |
| ArticleAuthors | I. A. Sultanguzin, P. A. Shomov, A. V. Egorov, I. V. Evseenko, Yu. V. Yavorovsky |
| ArticleAuthorsData | National Research University “Moscow Power Engineering Institute”, Moscow, Russia: I. A. Sultanguzin, Dr. Eng., Professor, Dept. of Industrial Heat and Power Systems Yu. V. Yavorovsky, Cand. Eng., Head of the Dept. of Industrial Heat and Power Systems
STC "Industrial Energy" Ltd., Ivanovo, Russia:
National University of Science and Technology “MISIS”, Moscow, Russia:
Gazprom VNIIGAZ, Moscow, Russia: |
| ArticleName | New ways to generate electricity using steam evaporative cooling systems for high-temperature iron and steel plants |
| ArticleAuthors | V. S. Dubinin, T. A. Stepanova, S. O. Shkarupa, V. P. Krupsky |
| ArticleAuthorsData | National Research University "Moscow Power Engineering Institute", Russia, Moscow: V. S. Dubinin, Cand. Eng., Associate Professor, e-mail: promteploenergetika@rambler.ru
Moscow State Regional Technological University, Korolev, Russia:
Ekokuber Ltd., Minsk region, village Leskovka, Republic of Belarus: |
| Mechanical Engineering Technologies | |
| ArticleName | Analysis of the stress-strain state when knurling riffles in a steel cylindrical shell |
| ArticleAuthors | V. D. Kukhar, V. A. Korotkov, S. S. Yakovlev, A. A. Shishkina |
| ArticleAuthorsData | Tula State University, Tula, Russia: |
| ArticleName | Influence of elastic deformations of a non-rigid box blanks, limited by the fixture design, on the accuracy of machined surfaces |
| ArticleAuthors | E. A. Danilenko, A. S. Yamnikov, A. A. Malikov |
| ArticleAuthorsData | Tula State University, Tula, Russia: E. A. Danilenko, Postgraduate Student, Dept. of Mechanical Engineering Technology, e-mail: danilenkoevg@rambler.ru |
| ArticleName | Design features of end mills with a combination of cutting and deforming teeth for machining tough-plastic alloys |
| ArticleAuthor | V. V. Istotsky |
| ArticleAuthorData | SPE RIT-Engineering Ltd., Chekhov, Russia: V. V. Istotsky, Dr. Eng., General Director, e-mail: v_ist@mail.ru |
