Journals →  Chernye Metally →  2020 →  #7

Chernye Metally



Preparing of raw materials and mineral processing
ArticleName Model for optimal control of a magnetic separator based on the Bellman dynamic programming method
ArticleAuthor N. V. Osipova
ArticleAuthorData

National University of Science and Technology “MISiS”, Novotroitsk affiliate (Novotroitsk, Russia):

N. V. Osipova, Cand. Eng., Associate Prof., Dept. of Automation, Institute of Information Technologies and Automated Control Systems, E-mail: nvo86@mail.ru

Steelmaking
ArticleName Physical modeling of the development of circulation fluid flows and removal of non-metallic inclusions in the tundish using a rotating electromagnetic field
ArticleAuthors A. N. Smirnov, E. N. Smirnov, A. P. Verzilov
ArticleAuthorsData

Physico-Technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine (Kiev, Ukraine):

A. N. Smirnov, Dr. Eng., Prof., E-mail: stalevoz@i.ua
A. P. Verzilov, Cand Eng., Doctoral Cand., E-mail: en_smirnov@i.ua

Stary Oskol Technological Institute (Stary Oskol, Russia)

E. N. Smirnov, Dr. Eng., Prof., E-mail: verzilovalex@gmail.com

Casting and Foundry Production
ArticleName Selection of exothermic carbon-containing additives for regulating the cooling mode of iron castings
ArticleAuthors N. A. Kidalov, N. I. Gabelchenko, A. A. Belov, A. I. Savchenko
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

N. I. Kidalov, Dr. Eng., Prof., Head of Dept. “Machines and Technology for Foundry Production”
N. I. Gabelchenko, Cand. Eng., Associate Prof.
A.A. Belov, Post-graduate student
A. I. Savchenko, Applicant
E-mail (common): mitlp@vstu.ru

 

N. Yu. Gulakov, head of the technological bureau of the blast-furnace shop of JSC EVRAZ NTMK, M. V. Polovets, engineer-technologist of the technical department of JSC EVRAZ NTMK, A. D. Martyukov, head of the industrial technology department of JSC EVRAZ NTMK participated in the preparation of the article.

ArticleName Development of heat-insulating mixtures for hot tops of steel castings using phosphate borates
ArticleAuthors I. E. Illarionov, L. Sh. Pestryaeva, Sh. V. Sadetdinov, I. A. Strelnikov, E. N. Zhirkov
ArticleAuthorsData

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof, Head of the Chair “Materials science and metallurgical processes”, E-mail: tmilp@rambler.ru

I. N. Strelnikov, Cand. Eng., Associate Prof.

 

Chuvash Agricultural Academy (Cheboksary, Russia):
L. Sh. Pestryaeva, Cand. Ped., Associate Prof.

 

“ELKON” JSC (Cheboksary, Russia):
Sh. V. Sadetdinov, Dr. Chem., Prof., Chief Technologist, E-mail: avgustaf@list.ru

 

Zelenodolsk Designing and Engineering Office (Zelenodolsk, Russia):
E. N. Zhirkov, General director

ArticleName Study of conditions for ensuring the density and reliability of cast fittings
ArticleAuthors V. V. Desnitsky, L. V. Desnitskaya, I. A. Matveev, P. V. Kovalev
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

V. V. Desnitskiy, Dr. Eng., Prof., Higher School of Physics and Materials Technology
L. V. Desnitskaya, Cand. Eng., Associate Prof., Higher School of Physics and Materials Technology
I. A. Matveev, Cand. Eng., Associate Prof., Higher School of Physics and Materials Technology
P. V. Kovalev, Cand. Eng., Associate Prof., Higher School of Physics and Materials Technology, E-mail: kovalev_pv@spbstu.ru

Machine-building Technologies
ArticleName Features of the formation of service properties of gears obtained by precision stamping
ArticleAuthors V. G. Shibakov, D. L. Pankratov, R. V. Shibakov, R. S. Nizamov
ArticleAuthorsData

Kazanskiy (Privolzhskiy) Federal University, Naberezhnye Chelny Institute (Affiliate) (Naberezhnye Chelny, Russia):

V. G. Shibakov, Dr. Eng., Prof., Head of the Dept. of Machine-building
D. L. Pankratov, Dr. Eng., Director of the Higher Engineering School
R. V. Shibakov, Cand. Eng., Associate Prof., Dept. of Machine-building
R. S. Nizamov, Post-graduate Student, E-mail: nizamovrs@yandex.ru

Ecology and Environment Protection
ArticleName Membrane treatment of water containing spent cooling fluids
ArticleAuthors I. G. Shaikhiev, V. O. Dryakhlov, D. D. Fazullin
ArticleAuthorsData

Kazan National Research Technological University (Kazan, Russia):

I. G. Shaikhiev, Dr. Eng., Prof., Head of the Engineering Ecology Dept., E-mail: ildars@mail.ru
V. O. Dryakhlov, Cand. Eng., Associate Prof., Engineering Ecology Dept., E-mail: vladisloved@mail.ru

 

Kazan (Privolzhskiy) Federal University, Naberezhnye Chelny Institute (Affiliate) (Naberezhnye Chelny, Russia):
D. D. Fazullin, Cand. Eng., Associate Prof., Dept. of Chemistry and Ecology., E-mail: denr3@yandex.ru

Economics and Finances
ArticleName World ferrous metallurgy: crisis around the turn of a new decade
ArticleAuthor Yu. L. Adno
ArticleAuthorData

Institute of World Economy and International Relations (Moscow, Russia):

Adno Yu. L., Cand. Eng., Leading Researcher, E-mail: yuriadno@mail.ru

Metallurgical History
ArticleName Charles Gascoigne and his activities in Karelia and the Donbass
ArticleAuthor E. S. Tarakanova
ArticleAuthorData

St. Petersburg, Russia:

E. S. Tarakanova, Independent Researcher, E-mail: tarakanova1@yandex.ru

Journals →  Chernye Metally →  2020 →  #7