| ArticleName |
Selective reduction of iron from ilmenite concentrate |
| ArticleAuthorData |
South Ural State University (NRU), Chelyabinsk, Russia
K. I. Smirnov, Rresearcher, Laboratory of Hydrogen Technologies in Metallurgy
P. A. Gamov, Cand. Eng., Associate Prof., Acting Head of the Laboratory of Hydrogen Technologies in Metallurgy
V. S. Samolin, Postgraduate Student, Dept. of Pyrometallurgical and Foundry Technologies
V. E. Roshchin, Dr. Eng., Prof., Chief Rsearcher, Laboratory of Hydrogen Technologies in Metallurgy, e-mail: roshchinve@susu.ru |
| Abstract |
The results of experimental studies of the selective reduction of iron from ilmenite concentrate with carbon and hydrogen are presented. It has been shown that hydrogen, as an alternative to carbon as a reducing agent, makes it possible to obtain metallic iron and rutile at a relatively low temperature, which are easily separated upon melting and are commercial products. The higher rate of hydrogen reduction is due to the fact that hydrogen, compared to carbon, is a stronger reducing agent at relatively low temperatures, and also due to its gaseous state of aggregation, which significantly increases the reaction surface in porous briquettes. It has been shown that at a temperature of 900 °C, the reduction of iron from ilmenite with both carbon and hydrogen proceeds with the formation of metallic iron and rutile. At a higher (1000–1100 °C) temperature of the reduction of iron with carbon, the resulting rutile enters into a chemicalinteraction with unreacted ilmenite, resulting in the formation of iron dititanate. The formation of iron dititanate depends on the rate of diffusion processes and does not depend on the type of reducing agent used. At a temperature of 1300 °C, the products of metal reduction from ilmenite with solid carbon are metallic iron and anosovite.
The study was supported by the Russian Science Foundation (grant No. 23-29-10119, https://rscf.ru/project/23-29-10119/) |
| keywords |
Ilmenite, reduction with hydrogen, reduction with carbon, solid-phase reduction,
metallic iron, titanium dioxide, rutile, iron dititanate, anosovite |
| References |
1. Leontyev L. I., Volkov A. I. State and development of the mineral resource base and metallurgy products to ensure Russia’s import independence. International scientific conference “Physico-chemical foundations of metallurgical processes” named after Academician A. M. Samarin. Vyksa. October 10–14, 2022: collection of conference proceedings. Vyksa, 2022. pp. 18–36.
2. Gudima N. V., Shein Ya. P. A quick-reference book on the metallurgy of non-ferrous metals. Moscow : Metallurgiya, 1975. 536 p.
3. Utkin N. I. Production of non-ferrous metals. Moscow : Intermet Inzhiniring, 2004. 442 p.
4. Sadykhov G. B. Fundamental problems and prospects for the use of titanium raw materials in Russia. Izvestiya vuzov. Chernaya metallurgiya. 2020. Vol. 63. No. 3-4. pp. 178–194. DOI: 10.17073/0368-0797-2020-3-4-178-194
5. Starikov A. I., Vedeshkin M. V., Monetov G. V. World and domestic experience in processing titanium-containing iron ore raw materials. Problems of complex processing of titanomagnetites of the Southern Urals. Magnitogorsk : Magnitogorskiy dom pechati, 2001. pp. 35–47.
6. Roshchin A. V., Gribanov V. P., Asanov A. V. Selective reduction and pyrometallurgical separation of metals from titanomagnetite ores. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Metallurgiya. 2006. No. 10 (65). pp. 49–55.
7. Akhmetov K. T., Roshchin V. E. Solid phase reduction of iron and chromium in the crystal lattice of ferrihrompikotit. The thirteenth International Ferroalloys Congress. Kazakhstan, Almaty. 2013. pp. 527.
8. Kosdauletov N., Roshchin V. E. Determining the conditions for selective iron recovery by ironmanganese ore reduction. Steel in Translation. 2020. Vol. 50, Iss. 12. pp. 870–876.
9. Suleimen B., Salikhov S. P. Metallization of oolitic iron ore after oxidation firing. Solid State Phenomena. 2021. Vol. 316. pp. 390–395.
10. Salikhov S. P., Roshchin A. V. Direct reduction of iron from crystal lattice of a complex oxide.
Materials Science Forum. 2019. Vol.946. pp. 506–511.
11. Roshchin V. E., Gamov P. A., Roshchin A. V., Salikhov S. P. Prospects for mastering of hydrogen technologies in domestic metallurgy. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2023. Vol. 79. No. 2. pp. 144–153. DOI: 10.32339/0135-5910-2023-2-144-153
12. Farren M., Matthew S. P., Hayes P. C. Reduction of solid wustite in H2/H2O/CO/CO2 gas mixtures. Metallurgical Transactions B. 1990. Vol. 21. pp. 135–139.
13. Spreitzer D., Schenk J. Reduction of iron oxides with hydrogen: a review. Steel Research International. 2019. Vol. 90, Iss. 10. 1900108.
14. Naseri Seftejani M., Schenk J. Thermodynamic of liquid iron ore reduction by hydrogen thermal plasma. Metals. 2018. Vol. 8, Iss. 12. 1051.
15. John D. H. S., Hayes P. C. Microstructural features produced by the reduction of wustite in H2/H2O gas mixtures. Metallurgical Transactions B. 1982. Vol. 13. pp. 117–124.
16. Matthew S. P., Cho T. R., Hayes P. C. Mechanisms of porous iron growth on wustite and magnetite during gaseous reduction. Metallurgical transactions B. 1990. Vol. 21. pp. 733–741.
17. Matthew S. P., Hayes P. C. Microstructural changes occurring during the gaseous reduction of magnetite. Metallurgical Transactions B. 1990. Vol. 21. pp. 153–172.
18. Matthew S. P., Hayes P. C. In situ observations of the gaseous reduction of magnetite. Metallurgical Transactions B. 1990. Vol. 21. pp.141–151. |
