Журналы →  Tsvetnye Metally →  2023 →  №11 →  Назад

SCIENTIFIC DEVELOPMENTS OF THE D. MENDELEEV UNIVERSITY OF CHEMICAL TECHNOLOGY OF RUSSIA
Название Physical and chemical transformations in hydrated lithium silicate with silicate module 3.6 when heated
DOI 10.17580/tsm.2023.11.05
Автор Makarov A. V., Kirsanova S. V., Tikhomirova I. N., Senina M. O.
Информация об авторе

D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia

A. V. Makarov, Associate Professor at the Department of General Technology of Silicates, Candidate of Technical Sciences, e-mail: makarov.a.v@muctr.ru
S. V. Kirsanova, Associate Professor at the Department of General Technology of Silicates, Candidate of Technical Sciences, e-mail: kirsanova.s.v@muctr.ru
I. N. Tikhomirova, Associate Professor at the Department of General Technology of Silicates, Candidate of Technical Sciences, e-mail: tikhomirova.i.n@muctr.ru
M. O. Senina, Associate Professor at the Department of Chemical Technology of Ceramics and Refractories, Candidate of Technical Sciences, e-mail: senina.m.o@muctr.ru

Реферат

This paper describes a study that looked at the phase transformations taking place in an inorganic binder based on aqueous solutions of lithium silicates when it is being heated up. The application scope includes diffusion thermal control coatings applied to surfaces of complex geometry parts made of light aluminum-magnesium alloys. The paper considers the processes of structuring of silicon-oxygen patterns during transition from an amorphous glassy state to a crystalline state when heated to 1,000 оC. The sequence of phase formation was established and the key role of chemically bound water as a stabilizing component of the system, which keeps it from crystallization, is demonstrated. It is shown that the decreased internal energy is associated with the formation of a crystalline phase and an increased connectivity of the amorphous component of the composition, due to the formation of long polysilicate chains of various structures and the precipitation of excess silica in the form of low-temperature quartz. It was established that the phase transformations occur in steps in the temperature range of 350 to 950 °C, and they begin immediately after a complete dehydration of the silicate binder with the separation of lithium metasilicate and the low-temperature form of tridymite into separate phases. As the heating process develops, a polymerization of the silicon-oxygen framework is observed due to the formation of chain- and ribbon-like polysilicate structures and the transition of tridymite into quartz.
The research was carried out using the equipment of the D. I. Mendeleev Center for Collective Use within the framework of project No. 075-15-2021-688.

Ключевые слова Liquid glasses, lithium silicate, protective coatings, thermal control coatings, anionic structure, mineral binders, glassy crystallization
Библиографический список

1. Mikhaylov M. M. Radiation and space materials science. Tomsk : Izdatelstvo Tomskogo universiteta, 2008. 314 p.
2. Mikhaylov M. M. Photostability of thermal control coatings of spacecrafts. Tomsk : Izdatelstvo Tomskogo universiteta, 2007. 380 p.
3. Elizarova Yu. A., Grigorevskiy A. V., Zakharov A. I. Developing a high-temperature protective coating with special properties. High-temperature ceramic composite materials and protective coatings: Proceedings of the 4th All-Russia Science and Technology Conference. Moscow : VIAM, 2020. pp. 209–214.
4. Tokar S. V., Barinova O. P., Zakharov A. I. Liquid-glass radiation-resistant thermal control coating. Steklo i keramika. 2019. Iss. 3. pp. 24–27.
5. Tokar S. V., Barinova O. P. Inorganic coatings made with silicates of alkali metals and their resistance to proton radiation. Technique and Technology of Silicates. 2019. Vol. 26, Iss. 1. pp. 6–8.
6. Fanghui Wang, Qian Zhang, Zenghua Liu, Mingxiu Hou et al. A bifunctional lithium polysilicate as highly efficient adhesion agent and anchoring host for long-lifespan Li-S battery. Journal of Colloid and Interface Science. 2023. Vol. 629, Part A. pp. 1045–1054.

7. Mingxia Wang, Shuren Zhang, Zhengyi Yang, Enzhu Li et al. Sintering behaviors and thermal properties of Li2SiO3-based ceramics for LTCC applications. Ceramics International. 2022. Vol. 48, Iss. 19. Part A. pp. 27312–27323.
8. GOST 9428–73. Reagents. Silicon (IV) oxide. Specifications. Introduced: 01.01.1975.
9. TU 6-09-3767–85. Chemically pure l-aqueous lithium hydroxide. Introduced: 01.01.1986.
10. Tashiro M., Sukenaga S., Shibata H. Control of crystallization behaviour of supercooled liquid composed of lithium disilicate on platinum substrate. Scientific Reports. 2017. Vol. 7, No. 1. 6078. DOI: 10.1038/s41598-017-06306-9
11. Plyusnina I. I. Infrared spectra of silicates. Moscow : Izdatelstvo MGU, 1967. 189 p.
12. Murata T., Nakane S., Yamazaki H., Al-Mukadam R. et al. Heterogeneous crystal nucleation, viscosity and liquidus temperature in the system lithium metasilicate – lithium disilicate. Journal of Non-Crystalline Solids. 2023. Vol. 605. 122170.
13. Bykov V. N., Anfilogov V. N., Osipov A. A. Spectroscopy and structure of silicate melts and glasses. Miass : IMinUrO RAN, 2001. 180 p.
14. Koroleva O. N., Shtenberg M. V., Khvorov P. V. Use of oscillation spectroscopy and X-ray structural analysis to examine the crystalline phases of the Li2O – SiO2 system. Zhurnal neorganicheskoy khimii. 2014. Vol. 59, No. 3. pp. 402–405.
15. Arnon Kraipok, Teerapong Mamanee, Jetsada Ruangsuriya, Wilaiwan Leenakul. Investigation of phase formation and mechanical properties of lithium disilicate glass-ceramic doped CeO2. Journal of Non-Crystalline Solids. 2021. Vol. 561. 120772.

Language of full-text русский
Полный текст статьи Получить
Назад