Journals →  Chernye Metally →  2023 →  #10 →  Back

85th anniversary of the dept. of Mechanics and Machine-building of Siberian state industrial university
ArticleName Creation of a self-aligning mechanism structure for metallurgical shears with parallel knives
DOI 10.17580/chm.2023.10.07
ArticleAuthor L. N. Gudimova
ArticleAuthorData

Siberian State Industrial University, Novokuznetsk, Russia

L. N. Gudimova, Cand. Eng., Associate Prof., Dept. of Mechanics and Mechanical Engineering, e-mail: lyu-gudiova@yandex.ru

Abstract

In rolling production, when cutting hot rolled products of various profiles, shears with parallel knives are widely used, which ensure the invariance of the plane of movement of the knives during the cutting process. A significant drawback of the structural diagrams of all existing crank-lever scissors is the use of hinges when connecting links (parts). In such joints, when assembling the mechanism, due to inaccuracies in the manufacture of parts and limited mobility (the hinge has only one possible movement in the plane, namely rotation around one of the axes), all links are additionally loaded with bending moments. This leads to the fact that when determining the energy intensity of the production cycle, it is necessary to take into account the energy costs to overcome the harmful forces of resistance. In addition, the lack of mobility causes additional wear at the joints of the parts. One of the modern tasks in the creation of mechanisms for the metallurgical industry is the task aimed at reducing the operational energy intensity of rolling mills, increasing the reliability and durability of wear parts. The paper proposes a method that allows you to create the structure of a multilink mechanism for cutting metal with parallel knives, with optimal energy consumption by eliminating the lack of mobility in kinematic pairs when connecting links.

keywords Redundant couplings, mobility, kinematic couples, mobility deficit, self-aligning mechanism, three-movement coupling
References

1. Petrov P. A. Separation operations in rolling production and assessment of their energy efficiency. Modern metallurgy of the new millennium: collection of scientific papers of the International Scientific and Practical Conference (Lipetsk, November 23–25, 2016). Lipetsk : Izdatelstvo Lipetskogo gosudarstvennogo tekhnicheskogo universiteta, 2016. pp. 226–230.
2. Borovik P. V. Improvement of the quality of cutting rolled products with chevron shears. Materials forming: collection of scientific works of the DMMA. Kramatorsk. 2013. No. 1 (34). pp. 245–250.
3. Borovik P. V. Analysis of the stress-strain state of metal when dividing a square profile using shears. Materials forming: collection of scientific works of the DMMA. Kramatorsk. 2014. No. 2 (39). pp. 17–23.
4. Satonin A. V., Borovik P. V., Petrov P. A. Simulation modeling of the workload spectrum of the process of cross-cutting sectional profiles using shears. Materials forming: collection of scientific works of the DMMA. Kramatorsk. 2014. No. 2 (39). pp. 53–59.
5. Kolchin N. I. Experience in constructing an extended structural classification of mechanisms and a structural table of mechanisms based on it. Analysis and synthesis of mechanisms. Proceedings of the Second All-Union Conference on the main problems of the theory of machines and mechanisms. Moscow : Mashgiz, 1960. pp. 85–97.
6. Galiullin I. A., Yarullin M. G., Mingazov M. R. Application of FDM technology in the manufacture of models of spatial mechanisms. XXII Tupolev Readings: Proceedings of the International Youth Scientific Conference (Kazan, October 19–21, 2015). Kazan : Izdatelstvo Kazanskogo gosudarstvennogo tekhnicheskogo universiteta, 2015. pp. 380–215.
7. Reshetov L. N. Self-aligning mechanisms: reference book. Moscow : Mashinostroenie. 1979. 334 p.
8. Tselikov A. I., Polukhin P. I., Grebenik V. M. et al. Machines and units of metallurgical plants. In 3 volumes. Vol. 3. Machines and units for production and finishing of rolled products: textbook for universities. Moscow : Metallurgiya. 1988. 680 p.
9. Galiullin I. A., Yarullin M. G., Mingazov M. R. Analysis and technology of the bricard linkage kinematic рarameters comparative experiments. Applied Mechanics and Materials. 2015. Vol. 788. pp. 295–300.
10. Nesmeyanov I. A. Structural synthesis of self-aligning gears of industrial robots with parallel kinematics. Vestnik Bryanskogo GTU. 2019. No. 4. pp. 4–13. DOI: 10.30987/article_5cb58f4ed2c444.85435034
11. Pozhbelko V. I. General theory of structural synthesis of normal and paradoxical selfaligning lever mechanisms and the practice of their creation in mechanical engineering for operation in different h-spaces. Izvestiya vuzov. Mashinostroenie. 2023. No. 6 (759). pp. 12–29.
12. Hu Y., Talbot D., Kahraman A. A load distribution model for planetary gear sets. Proceedings of the ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Vol. 10. 2017 ASME International Power Transmission and Gearing Conference. Cleveland, Ohio, USA. August 6–9, 2017. V010T11A008. ASME. DOI: 10.1115/DETC2017-68354
13. Artobolevsky I. I. Theory of mechanisms and machines. Knorus. 2023. 640 p.
14. Gudimova L. N., Dvornikov L. T. Fundamentals of the theory of redundant connections in mechanisms. Novokuznetsk : Poligrafist, 2018. 174 p.
15. Bychkov I. V., Dvornikov L. T., Zhukov I. A. To study the kinematics of metallurgical shears with parallel knives. Izvestiya vuzov. Chernaya metallurgiya. 2019. Vol. 62. No. 4. pp. 308–314.
16. Kraynev A. F. Dictionary-reference book on mechanisms. Moscow : Mashinostroenie, 1981. 438 p.

Language of full-text russian
Full content Buy
Back