Journals →  Chernye Metally →  2023 →  #10 →  Back

85th anniversary of the dept. of Mechanics and Machine-building of Siberian state industrial university
ArticleName Comparative analysis of the structure and electrochemical properties of zinc coatings to predict the contact corrosion on fasteners
DOI 10.17580/chm.2023.10.06
ArticleAuthor O. S. Bondareva, O. S. Dobychina, M. O. Dmitrieva, S. V. Konovalov
ArticleAuthorData

Samara University, Samara, Russia

O. S. Bondareva, Cand. Eng., Associate Prof., Dept. of Metal Technology and Aviation Materials Science, e-mail: osbond@yandex.ru
O. S. Dobychina, Postgraduate Student, Dept. of Metal Technology and Aviation Materials Science, e-mail: o.dobychina@zvpm.ru
M. O. Dmitrieva, Postgraduate Student, Dept. of Metal Technology and Aviation Materials Science, e-mail: mdmitr1ewa@yandex.ru

 

Samara University, Samara, Russia1 ; Siberian State Industrial University, Novokuznetsk, Russia2
S. V. Konovalov, Dr. Eng., Prof., Dept. of Metal Technology and Aviation Materials Science1, Vice-rector for Scientific and Innovative Activities, Head of the Dept. of Mechanics and Mechanical Engineering2, e-mail: konovalov@sibsiu.ru

Abstract

The elemental composition and structure of zinc coatings obtained by galvanizing, hot-dip galvanizing in zinc melt and galfan Zn + 5 % Al melt, thermal diffusion galvanizing, and gas-thermal spraying of zinc powder have been studied. And also the structure and elemental composition of the zinc lamellar coating and the ZINKER coating on a polymer binder were studied. Metallographic studies have shown that the surface and structure of zinc coatings depend on the coating method. By the method of energy-dispersive X-ray spectral microanalysis, it was found that the zinc content on the surface of the coatings differs. The surface of the coating obtained by hot-dip galvanizing at 450 °C is practically pure zinc, on the surface of the high-temperature hotdip zinc coating and the thermal diffusion zinc coating there are iron-zinc phases with different ratios of iron and zinc, the rest of the coatings have impurity elements on the surface, which is associated with the conditions for their preparation. To predict the electrochemical properties of the coatings, their standard electrode potentials were measured. A number of chemical stresses for various zinc coatings have been built. It has been established that in the case of contact of zinc coatings with each other in the presence of an electrolyte, the following variants of electrochemical interaction can be realized. Zinc lamellar coating, ZINKER coating and Galfan are oxidized in a galvanic pair with hot-dip galvanized products at 450 °C, providing cathodic protection. Thermal diffusion zinc coating does not form a galvanic couple with hot zinc coating. Galvanic, gas-thermal and high-temperature hot-zinc coating is restored in pair with hot-zinc coating. The data obtained must be taken into account when using products with various zinc coatings in the joints of parts.

keywords Hot dip galvanizing, galfan, zinc lamellar coating, thermal diffusion coating, electroplating, thermal spraying, contact corrosion, standard electrode potential
References

1. Polkin V. I. Zinc for corrosion protection. Fundamenty. 2021. No. 1 (3). pp. 68–71.
2. Chung P. P., Wang J., Durandet Y. Deposition processes and properties of coatings on steel fasteners – A review. Friction. 2019. Vol. 7. pp. 389–416. DOI: 10.1007/s40544-019-0304-4
3. Amit Khare, Sandeep Kumar Dwivedi, Manish Vishwakarma, Siraj Ahmed. Experimental investigation of hydrogen embrittlement during coating process and effect on mechanical properties of high strength steel used for fasteners. Materials Today: Proceedings. 2018. Vol. 5, Iss. 9. Part 3. pp. 18707–18715. DOI: 10.1016/j.matpr.2018.06.217
4. Bondareva O. S., Fedorova A. V. Study of influence of technological parameters of hot-dip galvanizing on the microstructure and thickness of the coating on fasteners. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoy akademii nauk. 2015. Vol. 17. No. 6-2. pp. 388–391.
5. Dobychina O. S., Bondareva O. S. Hot-dip galvanized fasteners under a microscope. Krepezh, klei, instrument i … 2021. No. 4. pp. 32, 33.
6. Mesbahzadeh A., Abdolmaleki H., Seyedraoufi Z. S. Interfacial investigation of St13/Molten Zn–5 % Al and corrosion behavior of formed layer via hot-dip process. Surf. Engin. Appl. Electrochem. 2021. Vol. 57. pp. 124–135. DOI: 10.3103/S1068375521010087
7. Kania H., Sipa J. Microstructure characterization and corrosion resistance of zinc coating obtained on high-strength grade 10.9 bolts using a new thermal diffusion process. Materials. 2019. Vol. 12, Iss. 9. 1400. DOI: 10.3390/ma12091400
8. Sotskov N. I. Thermal diffusion galvanizing is an effective method of anti-corrosion protection of high-strength fasteners. Control methods. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2019. Vol. 75. No. 9. pp. 1066–1076. DOI: 10.32339/0135-5910-2019-9-1066-1076
9. Xiqiang Zhong, Ruijie Liang, Guanghua Liu, Wei Pan. Zinc coating on steel by atmosphere plasma spray and their anti-corrosion behavior. Materials Letters. 2022. Vol. 314. 131825. DOI: 10.1016/j.matlet.2022.131825
10. Galkin R. V., Chumakov V. I., Naumov V. I. Thermocuring zinc-lamella coating based on epoxy resin. Galvanotekhnika i obrabotka poverkhnosti. 2018. Vol. 26. No. 3. pp. 10–17. DOI: 10.47188/0869-5326_2018_26_3_10
11. Chuntao Li, Junfeng Wei, Mincong Chen, Xiaoxiao Guan et al. Ultralow-temperature fabrication of chromium-free zinc-aluminum coatings based on polysilazane. Materials Chemistry and Physics. 2022. Vol. 278. 125608. DOI: 10.1016/j.matchemphys.2021.125608
12. Bocharov V. A. Protection of metal structures from corrosion by galvanizing. Gidrotekhnika. 2022. No. 1 (66). pp. 74, 75. DOI: 10.55326/22278400_2022_1_66_74
13. GOST 9.005–72. Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and nonmetals. Introduced: 01.07.1973.
14. Pustov Yu. A., Kalita V. I., Tursunbaeva A. A. Structural state and corrosion resistance of a plasma coating made of a nickel alloy. Perspektivnye materialy. 2018. No. 7. pp. 57–66. DOI: 10.30791/1028-978X-2018-7-57-66
15. Kiselev V. G., Medyanyi S. A. Basic principles of the influence of a potential jump between two metals on their contact corrosion. Izvestiya vuzov. Problemy energetiki. 2013. No. 9-10. pp. 89–96.
16. Sotskov N. I., Menshchikova O. A. Forecasting the service life of galvanized fasteners in water wells. Promyshlennoe i grazhdanskoe stroitelstvo. 2020. No. 10. pp. 31–38. DOI: 10.33622/0869-7019.2020.10.31-38

Language of full-text russian
Full content Buy
Back