Journals →  Chernye Metally →  2022 →  #10 →  Back

50 years of the Department of Metallurgical Technologies Nizhny Tagil Institute of Technology (NTI, UrFU branch)
ArticleName Analysis of the use of magnesium-containing additives in the charge of iron flux in order to reduce CO2 emissions
DOI 10.17580/chm.2022.10.03
ArticleAuthor M. V. Polovets, K. V. Mironov, A. A. Forshev, S. A. Zagainov
ArticleAuthorData

JSC EVRAZ NTMK, Nizhny Tagil, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia2:

M. V. Polovets, Process Engineer1, Postgraduate Student, Dept. of Metallurgy of Iron and Alloys2, e-mail: mvpolovets@urfu.ru

 

JSC EVRAZ NTMK, Nizhny Tagil, Russia:
K. V. Mironov, Head of Blast Furnace Shop
A. A. Forshev, Deputy Head of Technical Department

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia:
S. A. Zagainov, Dr. Eng., Prof., Dept. of Metallurgy of Iron and Alloys, e-mail: zagainovski@mail.ru

Abstract

The growing requirements for the quality of finished steel products oblige to obtain steel with a low content of harmful impurities, especially sulfur. The main charge for steel production in the conditions of JSC EVRAZ NTMK is vanadium iron, the external desulfurization of which leads to large losses of valuable vanadium. Therefore, the smelting of iron with a low sulfur content is an urgent task. The main way to reduce sulfur in iron is to increase the basicity of the slag (B2), but MgO is the best desulfurizer. The paper evaluates the effectiveness of the use of various magnesium-containing materials in the conditions of the blast-furnace stage of JSC EVRAZ NTMK, taking into account CO2 emissions. The possibility of replacing limestone in the iron flux charge with dolomite, as well as with steel converter slag, is considered. Both materials will increase the proportion of MgO in blast-furnace slag, however, the use of dolomite is accompanied by a two-fold increase in CO2 emissions compared to limestone. Converter steel slag (CSS) does not contain carbonates, thus eliminating the formation of CO2 during the limestone decomposition. An additional advantage of CSS is its high content of valuable vanadium and manganese. The effect of an increase in MgO in slag on its melting point is considered. It has been established that an increase in the proportion of MgO to 14% will not cause difficulties in the processing of blast-furnace smelting products and will reduce the sulfur content in iron and the formation of titanium carbides and carbonitrides.

keywords Blast furnace, vanadium iron, sulfur content in iron, MgO content in slag, iron flux, dolomite, steel converter slag, CO2 emission, JSC EVRAZ NTMK
References

1. Smirnov L. А., Deryabin Yu. А., Nosov S. К. Converter processing of vanadium cast iron. Ekaterinburg: Sredne-Uralskoe knizhnoe izdatelstvo, 2000. 528 p.
2. Smirnov L. А., Deryabin Yu. А., Shavrin S. V. Metallurgical processing of vanadium-containing titanomagnetites. Chelyabinsk: Metallurgiya, 1990. 256 p.
3. Blast furnace production: reference edition. In 2 vols. Vol. 1. Preparation of ores and blast furnace process. Edited by Е. F. Vegman. Moscow: Metallurgiya, 1989. 486 p.
4. Tovarovskiy I. G., Mozharenko N. М., Beletskiy V. А. et al. Conditions for smelting low-silicon, low-sulfur iron. Stal. 1992. № 10. С. 5–8.
5. Ishikawa I., Case M., Abe Y. et al. Influence of post on blast furnace operation. Coke reactivity and its effects on blast furnace operations. Society. 1990. p. 37.
6. Liziero Ruggio da Silva G., Souza R., Belchior Reis T. et al. Influence of сoal tar addition on coke quality. AISTech 2018 Proceedings. 2018. pp. 173–184.
7. Kawashima T., Murao A., Yamamoto N. et al. Prediction of pulverized coal combustion behavior around tuyere by using LES and extended CPD model. ISIJ International. 2020. No. 5. pp. 905–914.
8. Panteleev V. V., Pykhteeva К. B., Polovets М. V. et al. Analysis of the effectiveness of possible methods for desulfurization of iron in the processing of titanomagnetites. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2020. No. 6. pp. 543–549.
9. Mironov К. V., Forshev А. А., Zagaynov S. А., Tleugabulov B. S. Modern technology for processing vanadium-containing titanomagnetites. Iron metallurgy. Development prospects until 2025: Proceedings of the IX International Congress of Blast Furnace Workers. Moscow: Izdatelskiy dom "Kodeks", 2018. pp. 91–97.
10. Babenko А. А., Mukhranov N. V., Levchuk V. V. et al. Investigation of the phase composition of converter magnesia slags and control of the process of formation of a wear-resistant scull. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2010. No. 11. pp. 35–38.
11. Voskoboynikov V. G., Dunaev N. Е., Mikhalevich А. G. et al. Properties of liquid blast-furnace slags. Moscow: Metallurgiya, 1975. 184 p.
12. Gavrilyuk G. G., Lekontsev Yu. А., Abramov S. D. Blast furnace smelting of titanomagnetites. Tula: ASSOD, 1997. 216 p.
13. Allibert M., Gaye H., Geiseler J. Slag Atlas 2nd Edition. Düsseldorf: Verlag Stahleisen GmbH, 1995. 616 p.
14. Rytvin V. М., Perepelitsyn V. А., Ponomarenko А. А., Gilvarg S. I. Ferrochrome aluminothermic slags are technogenic raw materials of multifunctional application. Part 2. Use of ferrochrome slags in refractories and metallurgy. Novye ogneupory. 2017. No. 12. pp. 13–19.

Language of full-text russian
Full content Buy
Back