Institute of Metallurgy at the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia:

E. M. Zhilina, Senior Researcher at the Laboratory of Rare Refractory Metals, Candidate of Chemical Sciences, e-mail: ezhilina@bk.ru

Institute of Metallurgy at the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia¹ ; Ural State Mining University, Yekaterinburg, Russia²:

S. A. Krasikov, Principle Researcher at the Laboratory of Rare Refractory Metals^{1, 2}, Doctor of Technical Sciences, e-mail: sankr@mail.ru

Leading Institute of Chemical Technology (VNIIKhT), Moscow, Russia:

I. V. Kuznetsov, Head of the Laboratory for Spent Nuclear Fuel and Radioactive Waste Management, Candidate of Technical Sciences, e-mail: ivan7501966@mail.ru

M. Yu. Kalenova, Head of the Department of Сhemical Technologies for Closed Nuclear Fuel Cycle, Candidate of Technical Science, e-mail: kalenovamu@yandex.ru

This paper examines how ultrafine particles of uranium oxide interact with zirconium alloys in the presence of oxide and fluoride slags. The authors analyzed the probability of the components of Zr – 1% Nb alloy contaminated with ultrafine uranium oxide particles transitioning into slag phase during the process of remelting fuel element claddings using different fluxing agents. By means of thermodynamic modelling, the authors looked at the interaction of the cladding material of fuel elements used in thermal reactors (zirconium-niobium alloy) contaminated with traces of nanosized uranium oxide with molten oxide and fluoride fluxes in the temperature range of 1,000 to 2,000 ^oC. It was found that, for the interaction of Zr – 1% Nb alloy with fluoride and oxide melts, the metal should be slightly dissolved in the slag phase. Analysis of the interactions of ultrafine uranium compounds with slag mixtures for the temperature range of 1,000 to 2,000 ^oC showed a predominant transition of uranium, when reacting with fluoride fluxes, into the metal phase in its elementary form – U and into slag phase (about 4%) in the form of UF₃ and UOF₂ compounds. During reactions with oxide fluxes, uranium mainly distributes in the metal in its elementary form — U. At the same time, 18 to 19% of uranium can transition into slag phase in the forms of UO, UO₂, and UOF₂. It should be noted that that fact that uranium oxide particles have an ultradispersed structure should contribute to their transition into slag and thus help speed up the treatment process.
This research was carried out in the framework of the Single Industry-Specific Plan by Rosatom; Project No. EOTP-TTsPM-263. Equipment owned by the shared knowledge centre Ural-M was utilized for this research.
The authors would like to thank T.V. Osinkina and A.S. Russkikh, junior researchers at the Laboratory of Rare Refractory Metals of the Institute of Metallurgy at the Ural Branch of the Russian Academy of Sciences, for their contribution.

1. Zhang D., Li Y., Gao R. et al. Hydrothermal synthesis of uranium dioxide and graphene composite and its application as an additive for uraniumdioxide-based accident tolerant fuel. Ceramics International. 2021. Vol. 47, Iss. 8. pp. 11249–11256. DOI: 10.1016/j.ceramint.2020.12.250.
2. Cappia F., Jovani-Abril R., Spino J. et al. Laser melting of nano-crystalline uranium dioxide. Progress in Nuclear Energy. 2014. Vol. 72. pp. 11–16. DOI: 10.1016/j.pnucene.2013.10.018.
3. Zvoriste-Walters C. E., Heathman S., Jovani-Abril R. et al. Crystal size effect on the compressibility of nano-crystalline uranium dioxide. Journal of Nuclear Materials. 2013. Vol. 435, Iss. 1-3. pp. 123–127. DOI: 10.1016/j.jnucmat.2012.12.012.
4. Meretukov M. A., Tsepin M. A., Vorobiev S. A., Syrkov A. G. Nanosized clusters, structures and materials: Prospective innovations and solutions. Moscow : “Ore and Metals” Publishing House, MISiS, 2005. 128 p.
5. Popel S. I. Surface phenomena in melts. Moscow : Metallurgiya, 1994. 440 p.
6. Popel S. I., Sotnikov A. I., Boronenkov V. N. Theory of metallurgical processes: A guide for university students. Moscow : Metallurgiya, 1986. 463 p.
7. Krasikov S. A., Zhilina E. M., Pichkaleva O. A. et.al. Effect of the intermetallic compound composition of the character of interphase interactions during aluminothermic coreduction of titanium, nickel, and molybdenum from their oxides. Russian Metallurgy (Metally). 2016. No. 8. pp. 771–775.
8. Syrkov A. G., Bazhin V. Yu., Mustafaev A. S. Nanotechnology and nanomaterials. Physical and minerals-related aspects. St. Petersburg : Politekh-Press, 2019. 244 p.
9. Gasik M. I., Lyakishev I. L., Emlin B. I. Theory and technology of ferroalloys. Moscow : Metallurgiya, 1988. 784 p.
10. Moiseev G. K., Vatolin N. A. Thermochemical properties of inorganic compounds: How they tend to change and modelling techniques to be applied. Yekaterinburg, 2001. 137 p.
11. Moiseev G. K., Vyatkin G. P., Barbin N. M., Kazantsev G. F. Application of thermodynamic modelling to better understand interactions involving ionic melts. Chelyabinsk, 2002. 166 p.
12. Slobodov A. A., Syrkov A. G., Yachmenova L. A., Prokopchuk N. R. Effect of temperature on solid-state hydride metal synthesis according to thermodynamic modeling. Journal of Mining Institute. 2019. Vol. 239. pp. 550–555.
13. Syrkov A. G., Prokopchuk N. R. Dispersed iron obtaining by the method of solid state hydride synthesis and the problem of hydrophobicity of metal. CIS Iron and Steel Review. 2021. Vol. 21. pp. 16–22.
14. Roine A. Outokumpu HSC chemistry for windows. Chemical reaction and equilibrium software with extensive thermochemical database. Pori : Outokumpu Research OY, 2006. 448 p.
15. Bazhin V. Yu, Syrkov A. G., Feschenko R. Y., Saitov A. V. The mechanism of lithium intercalation into carbon graphite potlining of aluminium reduction cell (Book Chapter). Nanoscale-Arranged Systems for Nanotechnology. N.Y. : Nova Science Publishers, Inc., 2015. pp. 47–54.