Journals →  Tsvetnye Metally →  2022 →  #7 →  Back

NOBLE METALS AND ITS ALLOYS
ArticleName Experimental testing of technologies for processing refractory gold-bearing raw materials
DOI 10.17580/tsm.2022.07.02
ArticleAuthor Boduen A. Ya., Poperechnikova O. Yu., Zalesov M. V., Grigoryeva V. A.
ArticleAuthorData

Saint Petersburg Mining University, Сhair for Metallurgy, Saint Petersburg, Russia:

A. Ya. Boduen, Associate Professor, Deputy Head of the Chair for Metallurgy, Candidate of Technical Sciences, e-mail: bodyen-anna@mail.ru

M. V. Zalesov, 3rd year Postgraduate Student

 

JSC SPA RIVS, Saint Petersburg, Russia:
O. Yu. Poperechnikova, Director for Scientific and Technological Research, Candidate of Technical Sciences

V. A. Grigoryeva, Process Engineer

Abstract

Primary deposits of gold-bearing ores are characterized by a variety of chemical and mineralogical composition. The search for a cost-effective method for processing gold-bearing ores is inextricably linked with a set of preliminary studies aimed at studying the composition of the ore, the forms of finding useful components, as well as assessing the effect of impurity elements and physical characteristics of the ore on the process of direct extraction of gold or ore dressing. In addition to preliminary gravity and flotation enrichment, technologies for preliminary preparation of raw materials before cyanidation, including ultrafine grinding, oxidative roasting, bacterial and autoclave oxidation, as well as various combinations of these operations, have found active use in industry. To evaluate the effectiveness of various methods of preparing raw materials before cyanidation, a refractory gold-bearing flotation concentrate obtained from pyrite-arsenopyrite ore was considered as the subject of research. The results of a number of studies on the search for rational parameters of flotation concentrate cyanidation made it possible to achieve gold recovery from the concentrate at the level of 45%. Further studies on pre-treatment of the flotation concentrate and subsequent cyanidation made it possible to achieve the following gold recovery rates:
– 44.95% — during cyanidation of flotation concentrate of initial size;
– 56% — during cyanidation of flotation concentrate after ultrafine grinding;
– up to 85% — using oxidative firing;
– 92.8–94.5% using autoclaved oxidative leaching (POX).
The gold recovery indicator is the main, but not the only criterion for choosing the technology for processing gold ores and concentrates. It is necessary to take into account operating and capital costs, stocks of raw materials, the geography of the area, the availability of developed infrastructure and qualified personnel. For each specific gold deposit, it is necessary to conduct technological studies and provide a feasibility study for the developed technology.

keywords Refractory gold concentrate, autoclave oxidation, ultrafine grinding, roasting, extraction, oxidation rate, cyanidation
References

1. Ivanov А. I., Chernykh A. I., Naumov Е. А., Volchkov А. G., Kulikov D. А. et al. Geological exploration for precious metals at the expense of the federal budget in the 21st century — results and prospects. Otechestvennaya geologiya. 2020. No. 6. pp. 3–14.
2. Lodeyshchikov V. V. Technology for extracting gold and silver from refractory ores. Irkutsk : “Irgiredmet”. 1999. Vol. 2. 452 p.
3. Aleksandrova T. N., Heide G., Afanasova A. V. Assessment of refractory gold-bearing ores based of interpretation of thermal analysis data. Journal of Mining Institute. 2019. Vol. 235. pp. 30–37.
4. Fedotov P. К., Senchenko А. Е., Fedotov К. V., Burdonov А. Е. Studies of the preparation characteristics of sulfide and oxidized ores of Aldan Shield`s gold deposits. Journal of Mining Institute. 2020. Vol. 242. pp. 218– 227.
5. Gilmutdinova R. А., Michurin S. V., Kovtunenko S. V., Elizaryeva Е. N. On the issue of the use and processing of waste from Southern Urals` mining and processing plants. Uspekhi sovremennogo estestvoznaniya. 2017. No. 2. pp. 68–73.
6. Litvinenko V. S. Digital economy as a factor in the technological development of the mineral sector. Natural Resources Research. 2020. Vol. 29, Iss. 3. pp. 1521–1541. DOI: 10.1007/s11053-019-09568-4.
7. Fokina S. B., Sizyakov V. М., Markelov А. V., Ivanik S. А. Arsenic behavior during neutralization of solutions after pyrite-arsenopyrite concentrates autoclave oxidation. Estestvennye i tekhnicheskie nauki. 2012. No. 1. pp. 376–381.
8. Ivanik S. А., Ilyukhin D. А. Flotation separation of elemental sulfur from gold cakes. Journal of Mining Institute. 2020. Vol. 242. pp. 202–208.
9. Adams M. D. Advances in gold ore processing. Vol. 15. Elsevier, 2005. 1076 p.
10. Emelyanov Yu. Е., Bogorodskiy А. V., Balikov S. V., Epiforov А. V. The assessment of options for processing refractory flotation concentrates. Tsvetnye Metally. 2012. No. 8. pp. 10–12.
11. Boginskiay А. S., Markelov А. V., Shneerson Ya. М., Petrov G. V. Application of the mathematical modeling method to calculate the process of autoclave oxidation of refractory sulfide gold-bearing flotation concentrate. Fundamentalnye issledovaniya. 2014. No. 3-4. pp. 706–710.
12. Boduen A. Y., Fokina S. B., Polezhaev S. Y. The hydrometallurgical pretreatment of a refractory gold sulfide concentrate (2019). Innovation-Based Development of the Mineral Resources Sector: Challenges and Prospects – 11th conference of the Russian-German Raw Materials. 2018. pp. 331–340.
13. Aleksandrova T., Nikolaeva N., Afanasova A., Romashev A., Kuznetsov V. Selective disintegration justification based on the mineralogical and technological features of the polymetallic ores. Minerals. 2021. Vol. 11, Iss. 8, Art. no. 851. DOI: 10.3390/min11080851.
14. Ivanik S. A., Ilyukhin D. A. Hydrometallurgical technology for gold recovery from refractory gold-bearing raw materials and the solution to problems of subsequent dehydration processes. Journal of Industrial Pollution Control. 2017. Vol. 33, Iss. 1, pp. 891–897.
15. Khainasova T. S. Factors affecting bacterial and chemical processes of sulphide ores processing. Journal of Mining Institute. Vol. 235. pp. 47–54.
16. Solodenko A. A., Vasiliev V. V., Solodenko A. B., Serebryakov M. A. Study on the ammonia autoclave leaching applied to substandard copper concentrates in the Zhezkazgan deposit. Sustainable Development of Mountain Territories. 2018. Vol. 10, Iss. 2. pp. 270–280. DOI: 10.21177/1998-4502-2018-10-2-270-280.
17. Fokina S. B., Petrov G. V., Sizyakova E. V., Andreev Yu. V., Kozlovskaya A. E. Process solutions of zinc-containing waste disposal in steel industry. International Journal of Civil Engineering and Technology. 2019. Vol. 10, Iss. 1. pp. 2083–2089.
18. Sedelnikova G. V. Comparison of autoclave and bacterial leaching. Zoloto i tekhnologii. 2014. No. 2. pp. 110–115.
19. Soe K. M., Ruan R., Jia Y., Tan Q., Wang Z. Influence of jarosite precipitation on iron balance in heap bioleaching at Monywa copper mine. Journal of Mining Institute. 2021. Vol. 247. pp. 112–113. DOI: 10.31897/PMI.2020.1.11.
20. Balykov A. A., Levenets O. O., Khainasova T. S. Flow bioreactor for studying bacterial-chemical leaching of sulfide copper-nickel ores and concentrates. Journal of Mining Institute. 2018. Vol. 232. pp. 383–387. DOI: 10.31897/pmi.2018.4.383.
21. Sanakulov К. S., Mustakimov О. М., Ergashev U. А., Akhatov N. А. About the expediency of application of combined technologies for processing of high refractory gold-sulfide ores. Tsvetnye Metally. 2016. No. 2. pp 9–15. DOI: 10.17580/tsm.2016.02.01.
22. Meretukov М. А. Gold: chemistry, mineralogy, metallurgy. Moscow : Izdatelskiy dom “Ruda i Metally”, 2008. 528 p.
23. Balikov S. V., Dementyev V. Е., Mineev G. G. Roasting of gold concentrates. Irkutsk : “Irgiredmet”, 2002. 416 p.
24. Cheremisina O. V., Al-Salim S. Z. Modern methods of analytical control of industrial gases. Journal of Mining Institute. 2017. Vol. 228. pp. 726–730.
25. Luganov V. А., Chepushtanova Т. А., Guseynova G. D. et al. Technological studies of the processing of gold-arsenic-coal concentrates. Proceedings of the International Scientific and Practical Conference “Effective technologies for the production of non-ferrous, rare and noble metals”. Almaty, 2018. pp. 190–195.
26. Conway M. H., Gale D. C. Sulfur’s impact on the size of pressure oxidation Autoclaves. JOM. 1990. Vol. 42. pp. 19–22.
27. Sizyakov V. М., Ivanik S. А., Boginskaya А. S., Bitkov G. А. Dehydration of pulps after autoclave leaching of finely ground sulfide concentrates. Estestvennye i tekhnicheskie nauki. 2012. No. 1. pp. 369–375.
28. Naboychenko S. S., Shneerson Ya. М. Autoclave hydrometallurgy of nonferrous metals. Yekaterinburg : GOU VPO UGTU-UPI, 2009. Vol. 1. p. 376; Vol. 2. p. 612.

Language of full-text russian
Full content Buy
Back