Journals →  Gornyi Zhurnal →  2022 →  #6 →  Back

MINING AND PROCESSING: TECHNOLOGY, EQUIPMENT AND MANAGEMENT IMPROVEMENT
ArticleName Application of new technologies in production of pellets at pelletizing factory at Lebedinsky GOK
DOI 10.17580/gzh.2022.06.04
ArticleAuthor Aushev A. G., Kireenkov A. N., Shatokhin E. M., Semenchenko A. V.
ArticleAuthorData

Lebedinsky GOK, Gubkin, Russia:

A. G. Aushev, Head of Pelletizing Factory
A. N. Kireenkov, Chief Metallurgist, kireenkov_a_n@lebgok.ru
E. M. Shatokhin, Chief Engineer at Pelletizing Factory
A. V. Semenchenko, Production Manager at Pelletizing Factory

Abstract

Sustainable development of modern industries is ensured by continuous progression. Successful manufacture of high margin products allows Lebedinsky GOK to keep the leadership in the global metallurgy. One of such products is fluxed (high-calcium) pellets. At the same time, until recently, equipment of the pelletizing factory made such production impossible. Iron production inevitably involves dusting and toxic emission. Accordingly, one of the key trends in performance of Lebedinsky GOK is persistent reduction in the environmental impact. Aimed to cut-down dust emission, gas-cleaning units of calcination machine 4 were replaced by electric filters. The atmospheric emission of dust was largely decreased as a result. An associate beneficial effect was the lowered dynamic resistance in air and gas path, which enabled reduction in power consumption by smoke exhausters and in dustiness at working places. Fluxed (high-calcium) pelletizing needs huge amount of fluxing agents. To this effect, the second building was constructed for intake and milling of fluxing additives. After the new additive intake and milling building construction, the output of milled agents increased by 45 %. Toward maximized productivity of the hot briquetted iron plant, a package of measures was developed for increasing the content of –16+11.2 mm size in pellets. One of such measures was introduction of ROSNAMIS blades for maintaining stable slag lining in bowl pelletizers. The implemented technologies provided the high margin production output at the reduced impact exerted by the industrial activities on the environment.

keywords Lebedinsky GOK, pelletizing factory, fluxed high-calcium pellets, electric filters, ecology, emission, bowl pelletizer, slag lining
References

1. Yusfin Yu. S., Bazilevich T. N. Calcination of iron ore pellets. Moscow : Metallurgiya, 1973. 272 p.
2. Abzalov V. M., Kuznetsov R. F., Yuriev B. P. et al. Thermal treatment of pellets of different acid-to-base ratio. Byulleten TSNIIchermet. 1974. No. 22. pp. 37–39.
3. Aliev G. M.-A. Dust entrapment and industrial gas-cleaning equipment : Manual. Moscow : Metallurgiya. 1986. 543 p.
4. Sanaev Yu. I., Reshidov I. K. Impact of dust emission components from electric filters on their efficiency. Air Purification in Ventilation and Conditioning Systems : Digest. Leningrad, 1979. pp. 41–45.
5. Pelevin A. E. Effects of magnetic flocculation on iron-bearing ore concentration. Obogashchenie Rud. 2021. No. 4. pp. 15–20. DOI: 10.17580/or.2021.04.03
6. Östensson O., Roe A. Sustainable mining: How good practices in the mining sector contribute to more and better jobs. Geneva : International Labour Organization, 2017. 44 p.
7. Almeida V. O., Schneider I. A. H. Production of a ferric chloride coagulant by leaching an iron ore tailing. Minerals Engineering. 2020. Vol. 156. 106511. DOI: 10.1016/j.mineng.2020.106511
8. Zenkov I. V., Nefedov B. N., Zayats V. V., Kiryushina E. V. Remote monitoring of mining situation and disturbed land ecology at the Teisk and Abagas iron ore deposits. Eurasian Mining. 2018. No. 1. pp. 41–44. DOI: 10.17580/em.2018.01.09
9. Mineral Commodity Summaries 2021. Reston : U.S. Geological Survey, 2021. 200 p.
10. Ignatieva M. N., Yurak V. V., Logvinenko O . A. Natural capital. Approaches to economic assessment. Eurasian Mining. 2021. No. 1. pp. 39–44. DOI: 10.17580/em.2021.01.08
11. Tsapakh S. L., Malts I. E., Chetverkin A. Yu., Smirnov P. V. Removal of iron from high-chloride nickel solutions. Tsvetnye Metally. 2019. No. 11. pp. 61–69. DOI: 10.17580/tsm.2019.11.08
12. Filin A. E., Zinovieva O. M., Kolesnikova L. A., Merkulova A. M. Prospects of safety control in combination of mining and metallurgy industries. Eurasian Mining. 2018. No. 1. pp. 31–34. DOI: 10.17580/em.2018.01.07
13. Ranängen H., Lindman Å. A path towards sustainability for the Nordic mining industry. Journal of Cleaner Production. 2017. Vol. 151. pp. 43–52.
14. Timofeeva A. S., Nikitchenko T. V. Lab-scale and commercial scale testing of metallurgical properties of pellets used for metallization. Chernaya metallurgiya. Buylleten nauchno-tekhnicheskoi i ekonomicheskoi informatsii. 2012. No. 6. pp. 20–25.
15. Yuriev B. P., Dudko V. A., Byakova M. A. Thermotechnical studies into firing of iron ore pellets for optimizing operating conditions of conveyor machine. Chernaya metallurgiya. Buylleten nauchnotekhnicheskoi i ekonomicheskoi informatsii. 2018. No. 5. pp. 28–35.
16. Kireenkov A. N. History of pelletizing factory at Lebedinsky GOK. Kursk Magnetic Anomaly : History, Culture, Science. Proceedings of Inter-Regional Conference in Commemoration of the Gubkin Town’s 75th Anniversary and Russia Year of Culture. Gubkin, 2014. pp. 86–92.

Language of full-text russian
Full content Buy
Back