Journals →  Obogashchenie Rud →  2022 →  #2 →  Back

ORE PREPARATION
ArticleName Ore preparation in deep-sea mining of cobalt-rich ferromanganese crusts
DOI 10.17580/or.2022.02.02
ArticleAuthor Yungmeister D. A., Korolev R. I., Ponomareva I. N., Kruglyakova M. V.
ArticleAuthorData

Saint Petersburg Mining University (Saint Petersburg, Russia):

Yungmeister D. A., Professor, Doctor of Engineering Sciences, iungmeister@yandex.ru
Korolev R. I., Postgraduate Student, rom8592009@yandex.ru

 

JSC «Yuzhmorgeologiya» (Gelendzhik, Russia):
Ponomareva I. N., Deputy Chief Geologist, IrinaP875@mail.ru
Kruglyakova M. V., Director of the Scientific and Analytical Center, kruglyakovamari@gmail.com

Abstract

The article covers the specific features of deep-sea mining of ferromanganese nodules (FMN) and cobalt-rich ferromanganese crusts (CMC) found in exploration areas. Experimental studies have been carried out to establish the physical and mechanical properties of CMC samples. These implied sample exposure to a bidirectional axial load from spherical balls (indenters) and compilation of resulting rock strength data sheets for subsequent evaluation. The processes of impact- and cut-induced CMC failure have been experimentally studied with identification of the impact load and axial cutting force required for ore preparation when using the combined mining approach. The existing FMN and CMC recovery facilities have been analyzed and the fundamental design principles have been developed for deep-sea mining with ore preparation. The FMN and CMC mining concept presented and described in the article features a walkingtype mining machine equipped with operating members designed for ore preparation. The article considers various CMC mining solutions using clamshell grabs with a built-in impact tool for ore preparation. A combined mining approach is proposed, with ore preparation implemented in the form of controlled penetration into the CMC bed and subsequent intensification of the impact-induced bed separation process without damaging the substrate. Two layout options have been analyzed for the use of the impact tool and the mining sequence, with the impact tool built along the grab axis or into the jaws of the grab. The latter option is deemed more efficient as it enables penetration management in line with the impact impulses and allows capturing chipped CMC pieces when the jaws are being closed.

keywords Cobalt-rich ferromanganese crusts, deep-sea mining, operating member, deep-water mining machine, impact tool, clamshell grab
References

1. Sharma R. Deep-sea mining: current status and future considerations. Deep-sea mining. Resource potential, technical and environmental considerations. Cham: Springer, 2017. pp. 3–21.
2. Tetsuo Ya. Fundamental geotechnical consideration for design of deep-sea mining systems. Deep-sea mining. Resource potential, technical and environmental considerations. Cham: Springer, 2017. pp. 259–295.
3. Hein J. R., Koschinsky A. Deep-ocean ferromanganese crusts and nodules. Treatise on geochemistry. 2nd ed. 2014. Vol. 13. pp. 273–291.
4. Shulga N. A. Characteristics of alkanes in ferromanganese nodules of the Clarion–Clipperton fracture zone. Oceanology. 2018. Vol. 58, No. 5. pp. 672–678.
5. Liu C., Massey M. S., Latta D. E., Xia Y., Li F., Gao T., Hua J. Fe(II)-induced transformation of iron minerals in soil ferromanganese nodules. Chemical Geology. 2021. Vol. 559. DOI: 10.1016/J.CHEMGEO.2020.119901.
6. Melnikov M. E. Cobalt-rich manganese crusts of ocean seamounts. Current state of the problem. VII All-Russian lithological meeting «Sedimentary basins, sedimentation and post-sedimentation processes in geological history». 2013. Vol. 2. pp. 264–268.
7. Melnikov M. E., Pletnev S. P. Age and formation conditions of cobalt-rich manganese crusts on guyots of the Magellan Seamounts. Litologiya i Poleznye Iskopaemye. 2013. No. 1. pp. 3–16.
8. Halbach P. E., Jahn A., Cherkashov G. Marine Co-rich ferromanganese crust deposits: description and formation, occurrences and distribution, estimated world-wide resources. Deep-sea mining. Resource potential, technical and environmental considerations. Cham: Springer, 2017. pp. 65–138.

9. Konstantinova N. P., Kuznetsov V. Yu., Cherkashev G. A., Novikov G. V., Bogdanova O. Yu., Rekant P. V., Mirão J. A. P., Madureira P. Ferromanganese crusts of Mendeleev swell: the features of composition and formation. Arktika: Ekologiya i Ekonomika. 2016. No. 3. pp. 16–28.
10. Ishiguro S., Masuda M., Komatsu M., Yamaji N., Kawano S. Development of the pilot system for test of excavating and ore lifting of seafloor polymetallic sulfides. Mitsubishi Heavy Industries Technical Review. 2018. Vol. 55, No. 3. pp. 1–7.
11. Sudarikov S., Narkevsky E., Petrov V. Identification of two new hydrothermal fields and sulfide deposits on the mid-atlantic ridge as a result of the combined use of exploration methods: Methane detection, water column chemistry, ore sample analysis, and camera surveys. Minerals. 2021. Vol. 11, Iss. 7. DOI: 10.3390/min11070726.
12. Korshunov V. A., Petrov D. N., Yastrebova K. N. Calculation method for constructing a rock strength passport based on the results of testing samples with spherical indentors. Conf. proc. «Innovative directions in the design of mining enterprises». 2017. pp. 256–265.
13. Pavlovich A. A., Korshunov V. A., Bazhukov A. A., Melnikov N. Yа. Estimation of rock mass strength in open-pit mining. Zapiski Gornogo Instituta. 2019. Vol. 239. pp. 502–509.
14. Korshunov V. A., Solomoychenko D. A., Bazhukov A. A. Strength estimation of fractured rock using compression – a specimen with spherical indenters. Geomechanics and Geodynamics of Rock Masses. London, UK: Taylor & Francis Group, 2018. Vol. 1. pp. 299–306.
15. Otsuka K., Ouchi K. An application of ocean mining technology: deep ocean water utilization. Deep-sea mining. Resource potential, technical and environmental considerations. Cham: Springer, 2017. pp. 345–361.
16. Atmanand M. A., Ramadass G. A. Concepts of deepsea mining technologies. Deep-sea mining. Resource potential, technical and environmental considerations. Cham: Springer, 2017. pp. 205–341.
17. Garrigue C., Clapham P. J., Geyer Y., Kennedy A. S., Zerbeni A. N. Satellite tracking reveals novel migratory patterns and the importance of seamounts for endangered South Pacific humpback whales. Royal Society Open Science. 2015. Vol. 2, Iss. 11. DOI: 10.1098/rsos.150489.
18. Gollner S., Kaiser S., Menzel L., Jones D. O. B., Brown A., Mestre N. C., et al. Resilience of benthic deep-sea fauna to mining activities. Marine Environmental Research. 2017. Vol. 129. pp. 76–101.
19. Serzhan S. L. Determining the rational immersion depth of a mining complex capsule for underwater mining of ferromanganese nodules. Procedia Engineering. 2016. Vol. 150. pp. 924–929.
20. Serzhan S. L., Trufanova I. S., Malevannyi D. V. Substantiation of the draghead application as a mining unit in conditions of solid minerals deep-sea mining. IOP Conference Series: Earth and Environmental Science. 2019. Vol. 272, Iss. 2. DOI: 10.1088/1755-1315/272/2/022048.
21. Kashirsky A. S., Drobadenko V. P., Vilmis A. L., Lukonina O. A. New technology of large-scale testing of solid minerals deposits of the seabed and oceans. Nedropolzovanie XXI Vek. 2018. No. 2. pp. 36–42.
22. Lipton I., Gleeson E., Munro P. Preliminary economic assessment of the Solwara project, Bismark sea, PNG. Technical Report compiled under NI 43-101. Nautilus Minerals Niugini Ltd, 2018. 274 p.
23. Jungmeister D. A., Smirnov D. V., Verzhansky A. P., Isaev A. I. Machines and equipment for extraction of ferromanganese nodules. St. Petersburg: Politekhnika-servis, 2015. 135 p.
24. Iungmeister D. A., Korolev R. I., Serzhan S. L., Isaev A. I., Borodkin E. O. Materials of devices and equipment for deep-sea mining of manganese resources. Journal of Physics: Conference Series. 2020. Vol. 1582. DOI: 10.1088/1742-6596/1582/1/012098.
25. Pat. RU 186415 U1 Russian Federation.
26. Pat. RU 193043 U1 Russian Federation.
27. Pat. RU 203596 U1 Russian Federation.
28. Romanova V. S., Gabov V. V. The effect of combined loads on the destruction of rocks with a granular structure. Materials Science Forum. 2021. Vol. 1022. pp. 1–6.

Language of full-text russian
Full content Buy
Back