Journals →  Chernye Metally →  2022 →  #2 →  Back

Rolling and Tubemaking
ArticleName Requirements for graphite-containing lubricants and equipment for applying to a controlled-moving mandrel in the manufacture of pipes from stainless steel grades in a continuous mill line
DOI 10.17580/chm.2022.02.05
ArticleAuthor V. I. Kuznetsov, A. V. Krasikov, A. A. Krivosheev, E. Yu. Pashnina, V. L. Neroznikov
ArticleAuthorData

Russian Research Institute of the Tube & Pipe Industries (RusNITI), Chelyabinsk, Russia:
V. I. Kuznetsov, Head of the department, Technical Director, e-mail: kuznetcovvi@rosniti.ru
A. A. Krivosheev, Deputy Head of Laboratory, e-mail: krivosheev@rosniti.ru
E. Yu. Pashnina, Researcher, e-mail: pashnina@rosniti.ru

 

Volzhsky Pipe Plant, Volzhsky, Russia:

A. V. Krasikov, Cand. Eng., Chief Rollerman, e-mail: krasikovAV@vtz.ru

 

Taganrog Metallurgical Plant, Taganrog, Russia:
V. L. Neroznikov, Head of Pipe Laboratory, e-mail: neroznikovVL@tagmet.ru

Abstract

In order to reduce the negative impact of temperature-deformation conditions on a working surface of a controlled-movable mandrel and improve the quality of resulting pipes, graphite-containing lubricants are used in modern pipe rolling mills in the line of a continuous rolling mill in the production of pipes, which is applied in the form of an aqueous suspension. Thus, the resulting continuous separating graphite coating makes it possible to reduce the coefficient of friction when the mandrel contacts the deformable metal. This, in turn, ensures the stable operation of the rolling equipment, increasing the durability of the mandrels and the quality of finished pipes. A lubricant is made up of several components, the most important of which is graphite. It is its properties that largely determine the quality and effectiveness of the resulting lubricating coating. The paper presents the results of studies of various properties of graphite, on the basis of which the requirements for its use as a lubricant were developed. The requirements for a suspension of graphite-containing lubricant and equipment for its application to the surface of a controlled-movable mandrel are also indicated, which together make it possible to obtain a high-quality graphite coating. The non-compliance of the properties of the graphite-containing lubricant with the requirements, as well as its poor application to the working surface of the mandrel, leads to incomplete separation of contact surfaces during the hot deformation of the metal. This can cause mandrels to rolling lap, reduce the quality of the inner surface of finished pipes, primarily from stainless steel grades, due to the formation of various defects in the form of deep scratches, cavities, and flaw, as well as a source of reducing the durability of continuous mill mandrels.

keywords Continuous mill, controlled-movable mandrel, seamless pipes, graphite, graphitecontaining lubricants, pipe quality, mandrel durability, coefficient of friction
References

1. Zubchenko А. S., Koloskov М. М., Kashirskiy Yu. V. et. al. Steels and alloys guide. Moscow: Mashinostroenie, 2003. 784 p.
2. Chertavskikh А. К., Belosevich V. К. Friction and process lubrication in metal forming. Moscow: Metallurgiya, 1968. 364 p.
3. Huai W., Zhang Ch., Wen Sh. Graphite-based solid lubricant for high-temperature lubrication. Friction. 2021. No. 9. Iss. 6. pp. 1660–1672.
4. Scharf T. W., Prasad S. V. Solid lubricants: a review. Journal of Material Science. 2013. Vol. 48. No. 2. pp. 511–531.
5. Penkin N. S., Penkin А. N., Serbin V. М. Fundamentals of tribology and triboengineering: textbook. Moscow: Mashinostroenie, 2008. 206 p.
6. Chichinadze А. V. Fundamentals of tribology (friction, wear, lubrication). Moscow: Mashinostroenie, 2001. 664 p.
7. Braithwaite Е. R. Solid lubricants and surfaces. Moscow: Khimiya, 1967. 320 p.
8. Ubbelohde А. R., Lewis F. А. Graphite and its crystal compounds. Moscow: Mir, 1965. 256 p.
9. Pierson O. Hugh. Handbook of carbon, graphite, diamond and fullerenes. USA: Processing, properties and Applications, 1994. 419 p.
10. Bolsunovskaya Т. А., Efimochkin I. Yu., Sevostyanov N. V., Burkovskaya N. P. Influence of graphite grade as a solid lubricant on the tribological properties of a metal composite material. Proceedings of the All-Russian Institute of Aviation Materials. 2018. No. 7. pp. 69–77.
11. Matveevskiy R. М. Lubricants. Anti-friction and anti-wear properties. Test Methods. Moscow: Mashinostroenie, 1989. 220 p.
12. Petrov А. N. Research of colloidal graphite water-based lubricants. Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki. 2012. No. 2. pp. 215–221.
13. Luo X. W., Jean-Charles R., Yu S. Y. Effect of temperature on graphite oxidation behavior. Nuclear Engineering and Design. 2004. No. 3. pp. 273–280.
14. Kane J. J., Contescu C. I., Smith R. E., Strydom G., Windes W. E. Understanding the reaction of nuclear graphite with molecular oxygen: kinetics, transport, and structural evolution. Journal of Nuclear Materials. 2017. Vol. 413. pp. 343–367.
15. Gulyaev G. I., Sergeev V. V., Evsyukova G. А., Cherny V. N. Comparison of graphite and phosphate lubricants for hot tube rolling on continuous long mandrel mills. Stal. 1995. No. 12. pp. 51–54.
16. Shevchenko М. P. Influence of lubrication on heat transfer between billet and tool. Stal. 1990. No. 8. pp. 65–68.
17. GOST R 5336–80. Single woven steel wire cloth. Specifi cations. Introduced: 01.01.1982. Moscow: Izdatelstvo standartov, 1980.

Language of full-text russian
Full content Buy
Back