MMC Norilsk Nickel’s Polar Division, Norilsk, Russia:

D. D. Novikova, Principal Specialist at the Engineering Support Centre, e-mail: cisp@nornik.ru
E. V. Shulga, Head of the Laboratory at the Engineering Support Centre, Candidate of Technical Sciences, e-mail: shulgaev@nornik.ru
A. S. Rendov, Chief Engineer at the Electrowinning Section of the Copper Plant, e-mail: rendovas@nornik.ru
V. A. Novoseltsev, Principal Specialist at the Science and Technology Directorate, e-mail: Novoseltsevva@nornik.ru

The copper electrorefining process adopted by Nornickel’s Polar Division is based on the use of various surface active agents (or, surfactants), such as hide glue used as a colloid that helps smoothen the cathode surface and prevent dendrite formation and thiourea that helps with the generation of ductile cathode deposits. The study was based on the surfactant consumption rates adopted by the Copper Electrowinning Section of the Copper Plant. Pursuant to the London Metal Exchange standards, the testing of specimens is based on the Spiral Elongation Number (SEN) indicative of the physical properties of copper cathodes – i.e. ductility and recrystallization ability during heat treatment. It is a fact that the ductility of electrolytic deposit is dictated by the crystal size and the concentration of impurities. This paper describes a laboratory study that shows that the average size of crystals in the copper electrolytic deposit tends to decrease as the concentration of thiourea in the nickel-bearing copper electrolyte rises. A relationship was established between the average size of crystals in the copper cathode deposit and the duration of its growth. The study helped determine how fast the concentration of thiourea tends to rise in commercial electrolyte depending on the copper cathode build-up duration. A direct relationship was established between the concentration of sulphur and other impurities in copper cathodes and the concentration of thiourea in copper electrolyte. The conducted study helped determine the relationships between the concentration of thiourea in the copper electrorefining electrolyte, the crystal size in the cathode deposit, impurities and the physico-mechanical properties of copper cathodes.

1. Levin A. I. Fundamentals of electrochemistry. Moscow : Metallurgizdat, 1963. 432 p.
2. Tarasov A. V. Production of non-ferrous metals and alloys: Reference book. In 3 vol. Vol. 1. General problems of metallurgy. Moscow : Metallurgiya, 2001. 344 p.
3. Baymakov Yu. V., Zhurin A. I. Hydrometallurgy and electrolysis. Moscow : Metallurgizdat, 1963. 616 p.
4. Rotinyan A. L., Tikhonov K. I., Shonina I. A. Theoretical electrochemistry. Ed. by A. L. Rotinyan. Leningrad : Khimiya, 1981. 424 p.
5. Volkhin A. I., Eliseev E. I., Zhukov V. P., Smirnov B. N. Copper for anodes and cathodes. Ed. by B. N. Smirnov. Chelyabinsk : Yuzhno-Uralskoe knizhnoe izdatelstvo, 2001. 431 p.
6. Mubarok Z., Filzwieser I., Paschen P. Dendritic Cathode Grown during cooper Electrorefining in the Presence of Solid Particles. Erzmetall. 2005. Vol. 58, No. 6. p. 315.
7. Antropov L. I. Effect of thiourea on the copper electrocrystallization process. Zhurnal prikladnoy khimii. 1954. Vol. XXVII, No. 1. pp. 55–63.
8. Gorelik S. S., Dobatkin S. V., Kaputkina L. M. Recrystallization of metals and alloys. Moscow : MISiS, 2005. 432 p.
9. Demin I. P., Rudoy V. M., Ostanin N. I., Plekhanov K. A. Understanding how impurities penetrate copper cathodes during electrolytic refining. Tsvetnye Metally. 2002. No. 5. pp. 23–28.
10. Demin I. P. Hidden mechanics behind accumulation of impurities in the cathode deposit during electrolytic refining of copper: Candidate of chemical sciences dissertation. Yekaterinburg : UPI, 2008.
11. Daldynbay A., Nefedov A. N., Nurmanova R. A., Nauryzbaev M. K. Understanding the effect of surface active agents during the initial stage of the copper electrodeposition process. Chemical Bulletin of Kazakh National University. 2017. No. 4. pp. 13–19.
12. Sekar R. Structural and morphological characteristics of nanocrystalline copper electrodeposits from acid sulphate electrolytes. The International Journal of Surface Engineering and Coatings. 2015. Vol. 93, Iss. 5. pp. 255–261.
13. Grujicic D., Pesic B. Electrodeposition of copper the nucleation mechanisms. Electrochimica Acta. 2002. Vol. 47, Iss. 18. pp. 2901–2912.
14. Stelter M., Bombach H. Process Optimization in copper Electrorefining. Advanced Engineering Materials. 2004. Vol. 6. pp. 558–562.
15. Yuryev A. I., Bolshakova O. V., Karpushova D. D. Dependence of physical properties of copper cathode on the concentration of surfactant in the electrolyte, which evens the surface of the cathode. XVI International Conference Surface Forces. Book of Abstracts. Kazan, Russia, 2018. p. 98.
16. Salimzhanova E. V., Devochkin A. I., Yudin E. V., Karpushova D. D. Development and indtroduction of technical solutions to bring the quality of Polar Division cathode copper to conformity with London Metal Exchange standard. Tsvetnye Metally. 2018. No. 6. pp. 44–51.
17. Yuriev A. I., Zolotoreva E. V., Karpushova D. D., Nosova O. V. Understanding the effect of electrolyte composition on the properties of copper cathodes produced by electrorefining. Nauchnyy vestnik Arktiki. 2018. No. 3. pp. 24–30.
18. Copper and copper alloys. Determination of spiral elongation number. BS EN 12893–2000. Published: 01.05.2020.
19. GOST 859–2014. Copper. Grades. Introduced: 01.03.2002.
20. Leuprecht G. Spiral elongation number and AR-value of copper rod in correlation to cathode quality. ISA Process Users Conference. Hitachi (Japan). 2004.
21. Kozlov S. L., Yudin E. V. Improvement of physical and mechanic characteristics of cathode copper. Tsvetnye Metally. 2013. No. 6. pp. 73–78.
22. Shivrin G. N. et al. The problems of copper and nickel electrowinning. Ryazan : Golos gubernii, 2011. pp. 25–54.
23. Gerlach J., Ziber H., Pawlek F. Possible application of organic additives (for electrolyte) in the copper electrolytic refining process. Express information. Tsvetnaya metallurgiya. 1968. No. 3. pp. 8–11.
24. Gomez H., Lizama H., Suarez C., Valenzuela A. Effect of thiourea concentration on the electrochemical behavior of gold and copper electrodes in presence and absence of Cu(II) ions. Journal of the Chilean Chemical Society. 2009. Vol. 54. pp. 439–444.
25. Safizaden F. Monitoring deposit properties and passivation of impure copper anodes by electrochemical noise measurements : presentee a la Faculte des etudes superieures de l’Universite Laval dans le cadre du programme de doctorat engnie des matriaux et de la metallurgie pour l’obtention du grade de de Philosophiae doctor (Ph.D.). Qubec, 2011. 258 p