Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

S. V. Kartavtsev, Dr. Eng., Prof., Dept. of Heat Engineering and Power Engineering Systems, e-mail: kartavzw@mail.ru
E. G. Neshporenko, Cand. Eng., Associate Prof., Head of the Dept. of Heat Engineering and Power Engineering Systems
S. V. Matveev, Engineer, Dept. of Heat Engineering and Power Engineering Systems

The energy efficiency of the integrated steel plant is studied basing on the Intensive Energy Conservation Methodology. The primary diagnostics of the energy efficiency of the integrated steel plant is carried out. The boundaries of the object of study are established from iron ore deposits to the finished steel cold-rolled sheet. The research object is presented in the form of a directed graph, and the flows of materials in this network are calculated. The thermophysical heat absorption of materials and intermediates within the boundaries of a closed heat engineering complex has been estimated. The energy intensity of the cold-rolled steel sheet within the same boundaries has been calculated. Efficiency of production was estimated by comparing heat consumption and energy intensity. The complete intensive energy conservation reserve in the complex has been determined. Reserve structure is studied and directions of its implementation are discussed. It is shown that the most complete implementation of the energy-saving reserve is possible only with the transition of a new generation of steel engineering and technology.

1. Yeen Chan, Ravi Kantamaneni. Study on Energy Efficiency and Energy Saving Potential in Industry from possible Policy Mechanisms. Contract No. ENER/C3/2012-439/S12.666002.
Report submitted by ICF Consulting Limited. Date: 1 December 2015. 461 p.
2. Bashmakov I. Driving Industrial Energy Efficiency In Russia. Moscow. 2013. 142 p.
3. Energy Efficiency In Industry. Edited by J.Sirchis. Directorate-General for Energy, Commission of the European Communities, Brussels, Belgium. Elsevier Applied Science. Taylor & Francis e-Library. 2005. 217 p.
4. Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Advanced High Strength Steels Manufacturing. September 2017. US Department of Energy. 55 p.
5. Giftopoulos E. P., Lasaridis L. J., Widmer T. F. Potential fuel effectiveness in industry. Cambridge, Massachusets: Ballinger Publishing Company, 1974. 90 p.
6. Chiogioji M. H. Industrial Energy Conservation. New York and Basel: Marcel Dekker Inc. 1979. 603 p.
7. McBrien M., Cabrera Serrenho A., Allwood J. M. Potential for energy savings by heat recovery in an integrated steel supply chain. Applied Thermal Engineering. 2016. Vol. 103. pp. 592–606.
8. De Beer J., Worrell E., Blok K. Future technologies for energyefficient iron and steel making. Annual Review of Energy and the Environment. 1998. Vol. 23 (1). pp. 123–205.
9. Real Prospects for Energy Efficiency in the United States. National Academies Press, Washington, DC. 2010.
10. Fruehan R. J., Fortini O., Paxton H. W., Brindle R. Theoretical minimum energies to produce steel for selected conditions. Carnegie Mellon University, Pittsburgh, PA, May 2000. Report. 33 p.
11. Klyuchnikov A. D. Power engineering of a technology. Teploenergetika. 2006. Vol. 53. No. 11. pp. 930–935.
12. Kartavtsev S. V., Klyuchnikov A. D. Lowest possible resource costs in ferrous-metallurgy heating systems. Steel in Translation. 2002. Vol. 32. No. 7. pp. 11–15.
13. Klyuchnikov A. D., Popov S. K. Employment of primary energy and intensive energy saving in scrap-to-light sections processing system. Stal. 1991. No. 3. pp. 85–89.
14. Kartavtsev S. V., Neshporenko E. G. Calculations of energy intensity of products metallurgical plants and systems, using heat. Magnitogorsk: Nosov Magnitogorsk state technical university. 2017. 72 p.