Журналы →  CIS Iron and Steel Review →  2021 →  №2 →  Назад

Metal Science and Metallography
Название Study of mechanical properties of C-Mn-Si composition metal after wire-arc additive manufacturing (WAAM)
DOI 10.17580/cisisr.2021.02.12
Автор A. E. Balanovskiy, N. A. Astafyeva, V. V. Kondratyev, A. I. Karlina
Информация об авторе

Irkutsk National Research Technical University, Irkutsk, Russia:

A. E. Balanovskiy, Cand. Eng., Associate Prof.
N. A. Astafyeva, Cand. Eng., Associate Prof.


A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences, Irkutsk, Russia:
V. V. Kondratyev, Cand. Eng., Senior Scientific Researcher


Moscow State University of Civil Engineering, Moscow, Russia:
A. I. Karlina, Cand. Eng., Scientific Researcher, e-mail: karlinat@mail.ru


Wire-arc additive manufacturing (WAAM) is considered as a rather promising alternative to conventional subtracting production process for manufacture of large expensive metal components with complicated geometrical shape. Up-todate direction of WAAM investigations is aimed on production of functional metallic components with complicated geometrical shape and high accuracy, surface processing and mechanical properties meeting the strict requirements of aerospace, automotive and instrumental industries. At the same time, structural application of metal components based on their mechanical properties is studied insufficiently. It is necessary to understand additionally influence of technological conditions (such as energy input, protective gas role, speed of wire feed, welding speed, facing features and its sequence etc.) on the thermal initial parameters and finishing mechanical properties. The paper displays that mechanical properties of low-alloyed silicon-manganese composition of C-Mn-Si type with ferrite-pearlite structure is higher comparing with conventional steel 09G2S. It is shown that impact strength values for C-Mn-Si-type composition, which id formed via WAAM method, is higher by 2 times in comparison with welded joints which are faced by Sv-08G2S wire. 

Ключевые слова Wire-arc additive manufacturing (WAAM), metal 3D printing technologies, low-carbon steel, structure, hardness, mechanical properties, extension, impact strength
Библиографический список

1. ASTM Committee F42 on Additive Manufacturing Technologies. Standard terminology for additive manufacture-general principles and terminology. ISO/ASTM52900-15. 2009.
2. Gu D. D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms. International Materials Review. 2012. 57 (3) : 133–16.
3. Ngo T. D., Kashani A., Imbalzano G., Nguyen K. T., Hui D. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Composites Part B: Engineering. 2018. Vol. 143. pp. 72–196.
4. Gu D. D., Ma C. L. In-situ formation of Ni4Ti3 precipitate and its effect on pseudoelasticity in selective laser melting additive manufactured NiTi-based composites. Applied Surface Science. 2018. Vol. 441. pp. 862–870.
5. Phan M. A. L, Fraser D., Gulizia S., Chen Z. W. Horizontal growth direction of dendritic solidification during selective electron beam melting of a Co-based alloy. Materials Letters. 2018. Vol. 228. pp. 242–245.
6. Williams S. W., Martina F., Addison A. C. Wire+arc additive manufacturing. Materials Science and Technology. 2016. Vol. 32. No. 7. pp. 641–647.
7. Ding D., Pan Z., Cuiuri D., Li H. Wire-feed additive manufacturing of metal components: Technologies, developments and future interests. International Journal of Advanced Manufacturing Technology. 2015. Vol. 81. pp. 465–481.
8. Pan Z., Ding D., Wu B., Cuiuri D., Li H., Norrish J. Arc welding processes for additive manufacturing: a review. Transactions on Intelligent Welding Manufacture. 2018. 3–24.
9. Shen C., Pan Z., Cuiuri D. Fabrication of Fe-FeAl functionally graded material using the wire-arc additive manufacturing process. Metallurgical and Material Transactions B. 2016. Vol. 47. No. 1. pp. 763–772
10. Rodrigues T. A., Duarte V., Miranda R. M., Santos T. G., Oliveira J. P. Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM). Materials. 2019. Vol. 12. p. 1121.
11. Kargapoltsev S. K., Balanovsky A. E., Gozbenko V. E., Karlina Y. I., Karlina A. I. Possibility of obtaining complex form details using additive surface technology. IOP Conference Series: Materials Science and Engineering. 2020, Vol. 759. No. 1. 012011.
12. Balanovsky A. E., Osipov S. A., Shmakov A. K. Research of surface quality of structural components made using additive technology of electric arc welding. IOP Conference Series: Materials Science and Engineering. 2019. Vol. 632. No. 1. 012087.
13. Ge J. G., Lin J., Lei Y. P., Fu H. G. Location-related thermal history, microstructure, and mechanical properties of arc additively manufactured 2Cr13 steel using cold metal transfer welding. Materials Science and Engineering A. 2018. Vol. 715. pp. 144–153.
14. Hu Z. Q., Qin X. P., Shao T. Welding thermal simulation and metallurgical characteristics analysis in waam for 5crnimo hot forging die remanufacturing. Procedia Engineering. 2017. Vol. 207. pp. 2203–2208.
15. Artaza T., Alberdi A., Murua M., Gorrotxategi J., Frías J., Puertas G., Melchor M. A., Mugica D., Suárez A. Design and integration of WAAM technology and in situ monitoring system in a gantry machine. Procedia Manufacturing. 2017. Vol. 13. pp. 778–785.
16. Luo Y., Li J. L., Xu J., Zhu L., Han J. T., Zhang C. Y. Influence of pulsed arc on the metal droplet deposited by projected transfer mode in wire-arc additive manufacturing. Journal of Materials Processing Technology. 2018. Vol. 259. pp. 353–360.
17. Wu B. T., Pan Z. X., Li S. Y., Cuiuri D., Ding D. H., Li H. J. The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution. Corrosion Science. 2018. Vol. 137. pp. 176–183.
18. Shi X. Z., Ma S. Y., Liu C. M., Wu Q. R., Lu J. P., Liu Y. D., Shi W. T. Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy: Microstructure and mechanical properties. Materials Science and Engineering A. 2017. Vol. 684. pp. 196–204.
19. Zhang H., Wang X., Wang G. Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling. Rapid Prototyping Journal. 2013. Vol. 19, No. 6. pp. 387–394.
20. Langger J., Schabhüttl P., Vuherer T. CMT additive manufacturing of a high strength steel alloy for application in crane construction. Metals. 2019. Vol. 9. No. 6. p. 650.
21. Grabin V. F., Denisenko A. V. Metal science of welding of low- and medium-alloyed steels. Kiev : Naukova dumka. 1978. 276 p.
22. Shorshorov M. Kh., Belov V. V. Phase transformations and varying steel properties during welding. Moscow : Nauka. 1972. 219 p.
23. Evans G. M. The effect of heat input on the microstructure and properties of C-Mn all-weld-metal deposits. Welding journal. 1982. April. pp. 125–132.
24. Shtremel M. A. Information content of impact toughness measurements. Metallovedenie i termicheskaya obrabotka metallov. 2008. No. 11. pp. 37–51.
25. Protopopov E. A. et al. Influence of chemical composition of welding wire Sv-08G2S on impact toughness of faced metal. Svarochnoe proizvodstvo. 2016. No. 10. pp. 3–8.

Полный текст статьи Study of mechanical properties of C-Mn-Si composition metal after wire-arc additive manufacturing (WAAM)