Journals →  Gornyi Zhurnal →  2021 →  #10 →  Back

EQUIPMENT AND MATERIALS
ArticleName Dynamic model of self-adaptive differential rotary feed system of a drill
DOI 10.17580/gzh.2021.10.12
ArticleAuthor Busygin A. M.
ArticleAuthorData

NUST MISIS, Moscow, Russia:

A. M. Busygin, Associate Professor, Candidate of Engineering Sciences, Busy9@rambler.ru

Abstract

It is impossible to advance mineral mining without using high-capacity and power-efficient machines in various operations, in particular, drilling. Design of any machine should specify engineering data of all components of the machine. This is infeasible without a comprehensive dynamic model of a machine, including inertia properties of parts and components, mechanical characteristics of drives, as well as properties and features of useful resistance forces to be overcome by the machine. This article discusses the layout of the differential rotary feed system of a drill, with detailed description of all components and operation mode. The main effect of this layout is self-adjustment of the velocity and feed of the rock-breaking tool as function of its motion resistance. The developed dynamic model of the rotary feed system is represented by a system of two differential equations. The generalized coordinates are assumed to be the angular motions of shafts of the baseline engine and the thruster. The differential equations allow synthesizing mechanism of the rotary feed system. The presented information can be useful for engineers and designers of self-adaptive rotary feed systems of drills.

keywords Feed system, drill, useful resistance force, self-adaptive system, mechanism design, automatic adjustment, dynamic model, speed–torque characteristic of drive
References

1. Busygin A. M. Selection and justification of parameters for differential rotary feed system of drill : Dissertation … of Candidate of Engineering Sciences. Moscow, 1994. 203 p.
2. Busygin A. M. Selection and justification of parameters for differential rotary feed system of drill : thesis of inauguration of Dissertation … of Candidate of Engineering Sciences. Moscow, 1994. 21 p.
3. Kudryavtsev V. N., Kirdyashev Yu. N. (Eds.). Planetary gears : reference book. Leningrad : Mashinostroenie, 1977. 535 p.
4. Burkov V. P., Petrov V. L. Parameters of control devices in adjustable electromechanical system based on the spectral model in the basis of the Chebyshev and Legendre polinomials. Nauchnyi vestnik Moskovskogo gosudarstvennogo gornogo universiteta. 2011. No. 12. pp. 14–19.
5. Burkov P. V., Burkov V. P., Timofeev V. Yu., Shchadrina A. V., Saruev L. A. et al. Mathematical modeling of electromechanical systems of machines for drilling of wells with various types of drives. Gornoe oborudovanie i elektromekhanika. 2018. No. 5(139). pp. 3–11.
6. Regotunov A. S., Sukhov R. I. Automated device to study the properties of rocks during drilling blast holes in open-pit mines. J. Fundament. Appl. Min Sci. 2018. Vol. 5, No. 2. pp. 295–298.
7. Shigin A. O. Design methodology for adaptive rotary feed tools of drills and their application technologies in structurally complex rock masses : Dissertation … Doctor of Engineering Sciences. Krasnoyarsk, 2015. 320 p.
8. Saruev L. A., Shadrina A. V., Saruev A. L., Vasenin S. S., Pakharev A. V. Prospects for development of technology and facilities of pilot bores horizontal directional drilling for trenchless laying of pipelines. Izvestiya Tomskogo politekhnicheskogo universiteta. Inzhiniring georesursov. 2019. Vol. 330, No. 4. pp. 89–97.

9. Zhukov I. A. Mechanics of rock destruction by an impact at simultaneous intrusion of several indenters. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta. 2018. No. 1(125). pp. 93–99.
10. Liangxue Cai, Polak M. A. A theoretical solution to predict pulling forces in ho rizontal directional drilling installations. Tunnelling and Underground Space Technology. 2019. Vol. 83. pp. 313–323.
11. Tervydis P., Ankuniene R. Horizontal directional drilling pilot bore simulation. Turkish Journal of Electrical Engineering and Computer Sciences. 2017. Vol. 25, No. 4. pp. 3421–3434.
12. Tibing Xiao, Jinyong Huang, Youming Ge. Simulation and control of heave compensation winch for ultra-depth floating drilling. 2017 IEEE 8th International Conference on Cybernetics and Intelligent Systems and IEEE Conference on Robotics, Automation and Mechatronics. Ningbo, 2017. pp. 609–613.
13. Abu Bakar M. Z., Butt I. A., Majeed Y. Penetration rate and specific energy prediction of rotary–percussive drills using drill cuttings and engineering properties of selected rock units. Journal of Mining Science. 2018. Vol. 54, No. 2. pp. 270–284.
14. Dmitriev V. N., Busygin A. M. Kinematic analysis of differential rotary feed system. Mining Mechanization and Electrification : Collection of Scientific Papers. Moscow : MGI, 1991. pp. 160–164.

Language of full-text russian
Full content Buy
Back