Sovrudnik Ltd., North Yenisei industrial community, Russia:

V. A. Pochekutov, Senior Foreman of the Hhydrometallurgical Department of the Gold Mining Factory, e-mail: vik_pochekutov@mail.ru

Since the main method of obtaining gold from thiourea solutions for gold mining plants operating on sorption technology is electrolysis with insoluble anodes, it is essential to ensure continuous operation of cells and reduce the number of unscheduled downtime associated with maintenance, cathode failure or troubleshooting. Electrolyzers with a developed surface are inferior in performance to direct-flow models due to the fact that for the former this figure decreases as the cathode deposit accumulates. However, during the operation of direct-flow electrolyzers, unplanned stops occur due to the dissolution of cathodes made of stainless steel mesh in thiourea solutions. In this case, the consumption and costs of purchasing the relevant elements are quite large. Therefore, it is necessary to replace the stainless steel cathode mesh with another material that can withstand the effects of acidic environment, high temperature and direct current for a long time not compromising reducing the performance of the cell. In addition, the cost should not exceed the stainless steel mesh from which the cathode is made, and the service life of such a cathode should be many times longer than the service life of cathodes made of mesh. It is shown that such material can be titanium of VT-1-0 grade made in the form of a perforated corrugated cassette. The operating parameters of the cell with a mesh cathode and using a corrugated perforated titanium cassette are given. The chemical compositions of commodity regenerates before electrolysis and solutions at the outlet of the process at the mesh cathode are shown. The description and drawing of the corrugated perforated titanium cassette are presented. The economic calculation and substantiation of the replacement of the cathode from the stainless steel mesh with the corrugated perforated titanium cassette are performed. The cost of the stainless steel mesh used for the fabrication of the mesh cathode and the titanium sheet for the perforated cassette were analyzed. The use of corrugated perforated titanium cassette on the direct-flow cell allowed to ensure its continuous operation, increase the amount of deposited cathode sludge due to the lack of unscheduled shutdowns to replace the dissolved cathodes.

1. Yakimenko L. М. Electrode materials in applied electrochemistry. Moscow : Khimiya, 1977. 260 p.
2. Chemistry: Processing of gold-bearing raw materials. Information library. Available at: http://www.e-ng.ru/ximiya/pererabotka_zolotosoderzhashhego_syrya.html (accessed: 05.04.20).
3. Canda L., Heput T., Ardelean E. Methods for recovering precious metals from industrial waste. Materials Science and Engineering. 2016. Vol. 106. pp. 1–9.
4. Perez N. Electrodeposition. Electrochemistry and Corrosion Science. Springer, 2016. pp. 327–388.
5. Electrolysis of gold. Handbook of chemistry 21. Chemistry and chemical technology. Available at: http://www.chem21/info/info/1269103/ (accessed: 05.04.20).
6. Abdel-Karim R. Electrochemical fabrication of nanostructures. Handbook of nanoelectrochemistry. Methods, properties and methods of electrochemical synthesis. Ed. Mahmood Aliofkhazraei, A. S. Hamdy Makhlouf. Springer, 2016. pp. 23–46.
7. Varentsov V. K., Varentsova V. I. Electrolysis with carbon-graphite flow electro des for solving problems of precious metal extraction from jewellery manufacturing wastes. Сhemistry for Sustainable Development. 2004. Vol. 12. pp. 293–301.
8. Davydova A. D., Volgin V. M. Template Electrodeposition of Metals. Russian Journal of Electrochemistry. 2016. Vol. 52, No. 9. pp. 806–831.
9. Ishrat S., Razaq A., Idrees M., Asif M. H. et al. Electrodeposition of gold on lignocelluloses and raphite based composite paper electrodes for superior electrical properties. Journal of Electronic materials. 2016. Vol. 45, No. 10. pp. 5140–5144.
10. Masliy А. I., Bek R. Yu., Makhnyr N. V., Ganin V. М., Sheshin V. А. Semi-industrial tests and introduction of electrolytic extraction of gold from commodity regenerate. Tsvetnye Metally. 1973. No. 8. pp. 73–75.
11. Syed S. Recovery of gold from secondary sources – A review. Hydrometallurgy. 2012. Vol. 115–116. pp. 30–51.
12. Varentsov V. K., Varentsova V. I. Electrodeposition of metals and their oxides on electrochemically modified three-dimensional carbon nanotubes. Protection of Metals and Physical Chemistry of Surfaces. 2017. Vol. 53, No. 6. pp. 1015–1021.
13. Jae-O Lee, Gwangwon Park, Jesik Park, Youngju Cho et al. Study of electrochemical redox of gold for refining in non-aqueous electrolyte. International journal of precision engineering and manufacturing. 2015. Vol. 16, No. 7. pp. 1229–1232.
14. Barchenkov V. V. Technology of hydrometallurgical processing of gold-containing flotation concentrates with the use of activated carbon. Chita: Poisk, 2004. 242 p.
15. Varentsova V. K., Bataev I. A. Ion-Exchange Membranes in Gold Electowinning Processes on Flow-Through Carbon Fiber Electrodes. Petroleum Chemistry. 2017. Vol. 57, No. 11. pp. 961–968.