Название |
Improving the quality of concentrates of Stoilensky GOK JSC with the use of magneticAgravity separation |
Информация об авторе |
Belgorod State National Research University (Belgorod, Russia):
Gzogyan S. R., Senior Researcher, gzogyan@bsu.edu.ru
JSC «Stoilensky GOK» (Stary Oskol, Russia): Scherbakov A. V., Direktor of the Technical Directorate, scherbakov_av@nlmkx.com |
Реферат |
An innovative high-grade magnetite concentrates production technology has been developed and pilot tested for ferruginous quartzites of the Kursk Magnetic Anomaly. This paper assesses the possibility of using magnetic-gravity separation to obtain high-grade products, suitable for direct metallization, from finely disseminated ferruginous quartzites of the KMA. The results of pilot tests are presented for the current production of high-grade magnetite concentrates from commercial concentrates and for the production of pellets at the Stoilensky GOK, which may be used to draw the following conclusions. Commercial magnetite concentrate may be processed by magnetic-gravity separation. The grade improvement (mass fraction of Fetot) in the pilot tests averaged 1.23 %, while the expected grade increase for industrial MG separation is 1.17 %. Magnetite concentrate for pellet production may also be processed by MG separation. The grade improvement in the pilot tests averaged 1.26 %, while the expected grade increase for industrial MG separation is 1.20 %. Magnetite concentrates are diluted with classes of over 0.045 mm. It is recommended to conduct the tests using classified feed. The processing of MG separation overflows, ground to d80 0.045 mm (the size of stage III industrial grinding), demonstrated the lack of prospects for obtaining any commercial product from this product. |
Библиографический список |
1. Chanturia E. L., Gzogyan S. R. Modern state of the theory and practice of obtaining high-quality magnetite concentrates. Gorny Informatsionno-analiticheskiy Byulleten'. 2012. No. S4-22. pp. 3–31. 2. Chanturia V. A. Innovation-based processes of integrated and high-level processing of natural and technogenic minerals. Gornyi Zhurnal. 2015. No. 7. pp. 29–37. DOI: 10.17580/gzh.2015.07.05. 3. Gzogyan T. N. Theoretical and experimental studies of obtaining high-quality concentrates. Gorny Informatsionnoanaliticheskiy Byulleten'. 2010. No. 4. pp. 389–393. 4. Kuskov V. B., Sishchuk Yu. M. Improvement of beneficiation technologies for iron oren of various type and material constitution. Gornyi Zhurnal. 2016. No. 2. pp. 70–74. DOI: 10.17580/gzh.2016.02.14. 5. Oliazadeh M., Vazirizadeh A. Removing impurities from iron ores: methods and industrial cases. XXVIII IMPC, Quebec, September 11–15, 2016. Paper 711. pp. 1–13. 6. Yushina T. I., Krylov I. O., Valavin V. S., Sysa P. A. Producibility of iron-bearing materials from industrial waste of Kamysh-Burun Iron Ore Plant using ROMELT process. Gornyi Zhurnal. 2017. No. 6. pp. 53–57. DOI: 10.17580/gzh.2017.06.10. 7. Lu L. Iron ore: mineralogy, processing and environmental sustainability. Cambridge: Woodhead Publishing, 2015. 641 p. 8. Aleynikov N. A., Usachev P. A., Zelenov P. I. Structuring of ferromagnetic suspensions. Leningrad: Nedra, 1974. 119 p. 9. Usachev P. A. Physical and mechanical bases and technology of separation of minerals in ferromagnetic suspensions: dis. abstract for the degree of Doctor of Engineering Sciences. Moscow, IPKON RAS, 1982. 37 p. 10. Opalev A. S., Khokhulya M. S., Fomin A. V., Karpov I. V. Creation of innovative technologies for production of high-quality iron concentrate production in the North West of Russia. Gornyi Zhurnal. 2019. No. 6. pp. 56–61. DOI: 10.17580/gzh.2019.06.07. 11. Dauce P. D., de Castro G. B., Lima M. M., Lima R. M. F. Characterisation and magnetic concentration of an iron ore tailings. Journal of Materials Research and Technology. 2019. Vol. 8, Iss. 1. pp. 1052–1059. 12. Tang Ch., Li K., Ni W., Fan D. Recovering iron from iron ore tailings and preparing concrete composite admixtures. Minerals. 2019. Vol. 9, Iss. 4. DOI: 10.3390/min9040232. 13. Bhadani K., Asbjörnsson G., Hulthén T., Evertsson M. Application of multi-disciplinary optimization architectures in mineral processing simulations. Minerals Engineering. 2018. Vol. 128. pp. 27–35. 14. Papalambros P. Y., Wilde D. J. Principles of optimal design: modeling and computation. 3ed. New York, Cambridge: Cambridge University Press, 2017. 376 p. 15. Opalev A. S. Improving quality of magnetite concentrates based on magnetic–gravity separation. Gornyi Zhurnal. 2020. No. 9. pp. 72–76. DOI: 10.17580/gzh.2020.09.10. 16. Gzogyan T. N., Opalev A. S., Gzogyan S. R., Scherbakov A. V. The use of magnetic-gravitational separation to produce a high quality concentrate from ferruginous quartzites KMA. Materials of the XII Congress of the CIS countries' concentrators, Moscow, 25–27 February, 2019. pp. 182–186. 17. Gzogyan S. R., Scherbakov A. V. Innovative technologies for enrichment of ferruginous quartzite KMA. Proceedings of the XVI All-Russian scientific and practical conference of NUST MISIS, Moscow, 9–11 December, 2019. pp.134–137. |