ArticleName |
Способы переработки хвостов обогащения оловянно-медных руд с получением товарной продукции |
ArticleAuthorData |
ООО «НИЦ «Гидрометаллургия», Санкт-Петербург, Россия:
А. Ю. Лапин, главный научный сотрудник, канд. техн. наук, эл. почта: lapin-a@gidrometall.ru Т. Ю. Косицкая, старший научный сотрудник, канд. техн. наук, эл. почта: kositskaya-t@gidrometall.ru Я. М. Шнеерсон, директор по науке и развитию, докт. техн. наук, проф. эл. почта: shneerson-y@gidrometall.ru
ООО «Геопроминвест», Хабаровск, Россия: В. И. Богданов, заместитель директора, эл. почта: tatjna.1950@mail.ru |
References |
1. Khanchuk A. I., Kemkina R. A., Kemkin I. V., Zvereva V. P. Mineralogy- and geochemistry-based substantiation for processing of mature fine tailings of Solnechny GOK (Komsomolsky rayon, Khabarovsk kray). Bulletin of Kamchatka Regional Association “Educational-Scientific Center. Earth Sciences”. 2012. No. 1, Iss. 19. pp. 22–40. 2. Yusupov Т. S., Kondratyev S. А., Baksheeva I. I. Production-induced cassiterite-sulfide mineral formation structural-chemical and technological properties. Obogashchenie Rud. 2016. No. 5. pp. 26–31. DOI: 10.17580/or.2016.05.05.
3. Classification of deposits and predicted resources of solid minerals: Application guidelines. Tin ores. Moscow, 2007. 4. Shneerson Ya. M., Muravin K. A., Chugaev L. V., Kasatkin S. V. et al. Autoclave processing of tin concentrates. Tsvetnye Metally. 1995. No. 5. pp. 20–23. 5. Conway M. H., Gale D. C. Sulfur’s impact on the size of pressure oxidation autoclaves. JOM. 1990. Vol. 42 (9). pp. 19–22. 6. Zaytsev P. V., Pleshkov M. A., Lapin A. Y., Shneerson Y. M. Pressure oxidation process development for treating complex sulfide copper materials. Proceedings of ALTA 2016 Nickel Cobalt Copper Session. Perth, 2016. 14 p. 7. Fokina S. B., Zotova I. E. Studying the behaviour of arsenic in autoclave processing of polymetallic concentrates containing noble metals. ICHTE – 2018. Proceedings of the International Conference. Saint Petersburg, June 2018. pp. 108–110. 8. Alkantsev M. I. Cementation processes in non-ferrous metallurgy. Moscow : Metallurgiya, 1981. 351 p. 9. Naboychenko S. S., Shneerson Ya. M., Kalashnikova M. I., Chugaev L. V. Autoclave hydrometallurgy of non-ferrous metals. Yekaterinburg : GOU VPO UGTU-UPI, 2008. Vol. 1. 376 p. 10. Lapshin D. A., Lapin A. Y. et al. Development of hydrometallurgical processing technology for processing of sulphide copper concentrates of Udokan copper deposit. Proceedings of Copper 2013. Santiago, Chile. pp. 312–318. 11. Walton R. Zinc Cementation. Advances in Gold Ore Processing. Ed. M. D. Adams. 2005. Vol. 15. pp. 589–603. 12. Chugaev L. V., Korzhenevskaya M. M. On gold leaching with sulphuric acid solutions. Izvestiya vuzov. Tsvetnaya metallurgiya. 1972. No. 5. pp. 57–62. 13. Khryashchev S. V., Berezkin O. P., Sirotinin V. G., Lobanova T. A. Autoclave processing of gold-containing concentrates. Tsvetnye Metally. 1969. No. 7. pp. 15–20. 14. Lapin A. Yu., Kositskaya T. Yu. et al. Processing of dumped tin-copper middlings and production of commodities: A case study of the Solnechny GOK tailings. ICHTE – 2018. Proceedings of the International Conference. Saint Petersburg, June 2018. pp. 62–64. 15. Swash P. M., Monhemius A. J. Hydrothermal precipitation from aqueous solutions containing iron (III), arsenate and sulphate. Hydrometallurgy ‘94, Chapman & Hall. New York, 1994. p. 177. 16. Technical encyclopedia. Vol. 14. Ed. by L. K. Martens. Moscow : Izdatelstvo “Sovetskaya entsiklopediya”, OGIZ RSFSR, 1931. 484 p. 17. Naboychenko S. S., Mamyachenkov S. V., Karelov S. V. Arsenic in nonferrous metallurgy. Ed. by S. S. Naboychenko. Yekaterinburg : UrO RAN, 2004. 204 p. 18. Shneerson Ya. M., Filippov G. F., Borbat V. F. Wastewater treatment in hydrometallurgical processing of copper-nickel sulfide ores and concentrates. Moscow : TsNIITsvetmet ekonomiki i informatsii, 1981. 49 p. 19. Nevatalo L., Aho A., Pieska V. et al. Sulfate removal from process water in Agnico Eagle Kittila. Seminar: Comprehensive sulfate management in cold mining waters. Oulu : University of Oulu, 2018. p. 13. |