Institute of Metallurgy and Material Science of the Russian Academy of Sciences (Moscow, Russia):

Z. N. Portnaya, Senior Researcher, e-mail: portn@mail.ru

«Ore and Metals» Publishing house:
E. V. Tsirulnikov, Deputy General Director, e-mail: tsirulnikov@rudmet.ru

The presented review contains brief analysis of the main interesting lectures and reports made in the sections of the XI Congress of Rollermen in Magnitogorsk (October 2017). In addition to the plenary meeting, the following sections are reported: «Production of hot-rolled sheet», «Production of cold-rolled sheet (including coated) and multi-layered sheet», «Section rolling», «Production of tubes and cold-formed sections», «Wire production», «Rolling rolls and guiding equipment», «General and theoretical problems».

1. Denisov S. V., Mychak M. N. Rolled products of Magnitogorsk Iron and Steel Works conquer Arctics. Chernye Metally. 2017. No. 11. p. 27.
2. Peters H. Industry 4.0 as the basis of modern metallurgical innovations. Chernye Metally. 2017. No. 7. pp. 56–63.
3. Chashchin V. V. Increase of hot-strip rolling effectiveness at using of coils controlled sooling technology. Metallurg. 2016. No. 6. pp. 23–27.
4. Lekhov O. S., Guzanov B. N., Lisin I. V., Bilalov D. Kh. Investigation of combined process of continuous casting and cyclical deformation for steel sheets making. Stal. 2016. No. 1. pp. 52–62.
5. Dema R. R., Amirov R. N., Kharchenko M. V., Kharchenko A. A., Levantsevich M. A., Maksimchenko N. N., Belyy A. N. Determination of parameters infl uencing the efficiency of the supply system for technological lubrication in continuous wide hot rolling mills. Vestnik Donetskogo natsionalnogo tekhnicheskogo universiteta. 2016. No. 4(4). pp. 27–31.
6. Goli-Oglu E. A. Eff ect of parameters of deformation and thermal deformation aging on the impact toughness of structural steel after TMT and HT. Metallovedenie i termicheskaya obrabotka metallov. 2017. No. 3. pp. 36–41.
7. Eppensteiner S. Hicon/H₂-Blankglühtechnik für hochlegierte Stahlbänder im Verglech. Stahl und Eisen. 2017. Bd. 137, No. 1. pp. 51–58.
8. Eremin G. N., Molotilov B. V., Kornienkov B. A., Cheglov A. E., Yusupov V. S., Bakhtin S. V., Parakhin V. I. Formation of inhibitor phase nanoparticles in technological process of production of high-permeability electrotechnical anisotropic steel. Stal. 2017. No. 9. pp. 59–61.
9. Burkin S. P., Korshunov E. A., Shimov V. V. et al. Resource- and energy-saving in metallurgy. Development of machines and technologies with innovation risk : tutorial: in 2 volumes. Vol. 1. Ekaterinburg: UrFU, 2010. 498 p.
10. Burkin S. P., Babaylov N. A. Analysis of radial cobbing of axially symmetric billets with multiple-head block. Ekaterinburg : IMASH, 1998. 63 p.
11. Pogorelchuk A. Ya. Definition of optimal parameters of technological proces of radial forging. Nauka i obrazovanie. 2009. No. 9. p. 64–69.
12. Potapov I. N., Polukhin P. I. Screw rolling technology. Moscow : Metallurgiya, 1990. 344 p.
13. Galkin S. P., Romantsev B. A., Kharitonov E. A. Putting into practice innovative potential in the universal radial-shear rolling process. CIS Iron and Steel Review. 2014. Vol. 9. pp. 35–39.
14. Kinzin D. I., Levandovskiy S. A., Rozhkov G. K., Sarancha S. Yu. Database of technological parameters as a basis of control shape and bar production. Kalibrovochnoe byuro. 2017. No. 9. pp. 8-11.
15. Moll er A. B., Sychkov A. B., Tulupov O. N., Kinzin D. I., Levandovskiy S. A., Sarancha S. Yu., Tikhomirova A. V., Malashkin S. O., Astafeva A. A., Lotfrakhmanova M. M., Kobzeva L. S., Nazarov D. V., Abdulmanov V. E., Rozhkov G. K., Baranov N. A. Development of rapid cooling of rolled products on the mill 450 for obtaining of a complex of mechanical properties according to the standard GOST 19281-2014 with a possibility of exclusion of steel microalloying. Report about the research work No. 2015-34 ot 22.09.2015 (JSC «MMK»).
16. Mikhaylenko A. M., Shvarts D. L. System approach to optimization of calibration of section rolling mills. Proizvodstvo prokata. 2016. No. 12. pp. 29–32.
17. Mikhaylenko A. M., Shvarts D. L. Block structure of rail gaging. Proizvodstvo prokata. 2017. No. 6. p. 16-20.
18. Dyja H., Galkin A., Knapinski. Reologia metali dksztalcanych plasticznie. Czestochowa: Widawnictwo politechniki czestochowskie, 2010. 371 p.