Journals →  Chernye Metally →  2017 →  #8 →  Back

Ironmaking
ArticleName Improvement of charge preparation systems in blast furnace practice
ArticleAuthor L. A. Vaisberg, A. N. Korovnikov, G. S. Podgorodetskiy.
ArticleAuthorData

Research and Engineering Corporation “Mekhanobr Tekhnika” (St. Petersburg, Russia):

Vaisberg L. A., Dr. Eng., Prof., Academician of the Russian Academy of Sciences, Chairman of the Board of Directors, Company Scientific Advisor, e-mail: gornyi@mtspb.com
Korovnikov A. N., Cand. Eng., Director, Concentrator Plants relations, e-mail: korovnikov_an@npk-mt.spb.ru

 

National University of Science and Technology “MISiS” (Moscow, Russia):
Podgorodetskiy G. S., Cand. Eng., Director of Scientific-Education Center “Innovative Metallurgical Technologies”, e-mail: podgs@misis.ru

Abstract

The data on iron and steel production worldwide in 2015 and 2016 are presented. It is shown that more than 75% of iron ore part of charge materials for blast furnaces are presented by sinter. Operation experience of Russian and Chinese blast furnaces are comparatively analyzed. It is displayed that lowering of charge of sinter fine fraction can be considered as one of the main directions for improvement of operation parameters of blast furnaces in our country. The paper examines the example of successful im plementation of innovative screens developed by Research and Engineering Corporation “Mekhanobr Tekhnika” and put into operation at Magnitogorsk Iron and Steel Works. This example has been used as the base for development and put into commercial practice the wide dimension range of new screens.

keywords Screen, sinter, fraction, charge preparation, innovations, blast furnace practice
References

1. Available at: https://www.worldsteel.org
2. Available at: https://www.gks.ru
3. Savelev S. G., Gubin G. V., Stoykova Ya. A. Prospects for the production of iron-ore pellets. Stal. 2013. No. 8. pp. 2–6.
4. Zheng-Jian Liu, Jian-Liang Zhang, Tian-Jun Yang. Low Carbon Operation of Super-Large Blast Furnaces in China. ISIJ International. 2015. Vol. 55, No. 6. pp. 1146–1156.
5. Ivanova I. M. Use of material and energetic resources. Byulleten «Chernaya metallurgiya». 2016. No. 10. pp. 9–15.
6. Volkov Yu. P., Shparber L. Ya., Gusarov A. K. Blast-furnace technologist : reference book and methodical guidance. Moscow : Metallurgiya, 1986. 255 p.
7. Vegman E. F. Breef reference book of blast furnace technologist. Moscow : Metallurgiya, 1981. 240 p.
8. Cast iron metallurgy : tutorial for universities. Third edition, revised and enlarged. Ed.: Yu. S. Yusfin. Moscow : IKTs «Akademkniga», 2004. 774 p.
9. Vaysberg L. A., Korovnikov A. N., Trofi mov V. A. Vibratory screening of metallic and non-metallic materials. Innovation developments of REC «Mekhanobr-tekhnika». Obogashchenie Rud. 2012. No. 5. pp. 35–39.
10. Vaysberg L. A., Kartavyy A. N., Korovnikov A. N. Screening surfaces. Structures, materials, application experience. Saint Petersburg : VSEGEI, 2005. 252 p.

Language of full-text russian
Full content Buy
Back