Журналы →  Obogashchenie Rud →  2017 →  №4 →  Назад

BENEFICIATION TECHNOLOGY
Название The sulphidemagnetite ores integrated processing technology
DOI 10.17580/or.2017.04.03
Автор Mamonov S. V., Savin A. G., Metelev A. A., Gazaleeva G. I.
Информация об авторе

Tekhnical University of UGMK (Ekaterinburg, Russia):

Mamonov S. V., Head of Chair, Candidate of Engineering Sciences, Mamonov_SV@umbr.ru

 

UGMK — Ural Mining and Metallurgical Company (Verkhnyaya Pyshma, Sverdlovsk region, Russia):

Savin A. G., Deputy Director for Mining and Mineral Processing, info@ugmk.com

 

OJSC «Svyatogor» (Krasnouralsk, Sverdlovsk region, Russia):

Metelev A. A., Chief Engineer, Svyatogor@svg.ru

 

OJSC «Uralmekhanobr» (Ekaterinburg, Russia):

Gazaleeva G. I., Deputy General Director for Analytical Work, Doctor of Engineering Sciences, gazaleeva_gi@umbr.ru

Реферат

The paper presents the results of the Peschanskoye deposit Southern body sulfide-magnetite ore material composition study. The analysis results show that the ore contains 0.59 % copper, with 66 % (rel.) of copper being associated with chalcopyrite; as well as 39.9 % iron, 81 % (rel.) of which is attributed to magnetite, and 3.87 % sulfur, 42 % (rel.) of which is associated with pyrrhotine, the latter by 65% being accounted for by a monoclinic modification. The main ironcontaining mineral in the ore is magnetite, its mass content being 45 %. In addition to magnetite, iron is also contained in carbonates, pyroxenes, amphiboles, chalcopyrite, pyrrhotine and pyrite. The main copper mineral in the sample is chalcopyrite, while covellite, chalcosine, bornite are of subordinate value. Cumulative mass content of copper minerals in the sample is about 1 %. According to the results of the laboratory technological studies, the following optimal parameters for ore beneficiation were determined: mass content of –71 μm size fraction in flotation feed is 65 %, pulp alkalinity — 250–280 g/m3 of free calcium oxide in pulp liquid phase, rougher copper flotation time — 20 min, butyl potassium xanthate consumption — 20 g/t, that of frother T-92 — 15 g/t, copper sulfate consumption in pyrrhotite activation — 300 g/t, magnetic field intensity — 119.4 kА/m. An integrated flotation-magnetic ore-processing technology was developed under laboratory conditions, permitting to produce copper concentrate containing 21.6 % copper, recovery being 91.7 %, as well as iron concentrate with mass fraction of iron being 66.5 % and that of sulfur — 1.2 %, iron recovery into concentrate being 87.9 %. The results of the pilot-scale testing of the technology in question at the «Svyatogor» Beneficiation Plant are presented, showing the possibility of obtaining copper concentrate with mass fraction of copper 19.1 %, recovery being 87.1 %, as well as iron concentrate with mass fraction of total iron 66.3 %, total iron recovery being 84.2 % and that of magnetite iron — 92.3 %. Sulfur mass fraction in iron concentrate was 1.6 %.

Ключевые слова Sulfide-magnetite ore, Peschanskoye deposit, copper, iron, pyrrhotine, flotation-magnetic flow sheet, integrated process technology
Библиографический список

1. Mamonov S. V., Dresvyankina T. P., Volkova S. V. Technology of cuprous magnetite beneficiation. Modern trends in the theory and practice of raw materials beneficiation and preparation for metallurgical processing. Materials of the Russian scientific-technical conf., October 24, 2016. Ed. S. V. Mamonov. Verkhnyaya Pyshma: TU UGMK, 2016.
2. Doroshenko M. V., Bashlykova T. V. Technological properties of minerals. Handbook for technologists. Moscow: Teploenergetik, 2007. 296 p.
3. Tsygalov M. A. Increase in the complexity of the pyrrhotite-containing copper-zinc ores use due to the application of combined magnetic flotation technology. Dissertation for the degree of Candidate of Engineering Sciences. Magnitogorsk, 2005. 128 p.
4. Oliazadeh M., Vazirizadeh A. Removing impurities from iron ores: methods and industrial cases. XXVIII IMPC, Quebec, September 11–15, 2016. Paper 711. pp. 1–13.
5. Bhambhani T., Nagaraj D. R., Yavuzkan O. Improving flotation recovery of oxide copper minerals. XXVIII IMPC, Quebec, September 11–15, 2016. Paper 469. pp. 1–13.
6. Parsapour Gh. A., Tafvizi S. Darvish, Arghavani E., Akbari A., Banisi S. Modification of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade. XXVIII IMPC, Quebec, September 11–15, 2016. Paper 507. pp. 1–7.
7. Shi Q., Chen Y., Feng Q., Zhang G. The effect of chlorite on the flotation of pyrrhotite. XXVIII IMPC, Quebec, September 11–15, 2016. Paper 579. pp. 1–10.
8. Pat. 2475308 Russian Federation.
9. Pat. 2189867 Russian Federation.
10. Matveyeva T., Ivanova T., Gromova N. Application of plant extracts as modifiers for selective flotation of sulfide minerals. Proc. of the XXVII IMPC. Santiago, Chile, 2014. Ghap. 3. pp. 90–98.
11. Posypkin L. D. Increase of the activating action of copper ions during flotation of disseminated copper-nickel ores in an alkaline medium. Obogashchenie Rud. 1980. No. 2. pp. 15–18.
12. Posypkin L. D. Investigation of peculiarities and research of ways to improve flotation technology for refractory non-ferrous metal ores containing iron sulphides. Dissertation for the degree of Candidate of Engineering Sciences. Leningrad, 1981. 139 p.

Language of full-text русский
Полный текст статьи Получить
Назад