Journals →  Gornyi Zhurnal →  2016 →  #12 →  Back

EQUIPMENT AND MATERIALS
ArticleName Substantiation of key design and regime parameters of sandwich belt high-angle conveyors
DOI 10.17580/gzh.2016.12.15
ArticleAuthor Galkin V. I., Sheshko E. E.
ArticleAuthorData

Сollege of Mining, National University of Science and Technology — MISIS, Moscow, Russia:

V. I. Galkin, Professor, Doctor of Engineering Sciences
E. E. Sheshko, Professor, Candidate of Engineering Sciences, esheshko@mail.ru

Abstract

The newer technical literature informs on intention to install sandwich belt highangles conveyors in cyclical-and-continuous flow charts in some open pit mines in Russia. Unfortunately, Russian plants have no experience in design and manufacture of sandwich belt high-angles conveyors, which means that this equipment is to be purchased from foreign manufacturers. On the other hand, the design of a sandwich belt high-angles conveyor represents a modification of a belt conveyor effectively manufactured in Russia. Russian scientists have been addressing the issue of calculation and selection of sandwich belt high-angles conveyors for many years. The analyses of accomplished researches and application in different mines have allowed making recommendations on selecting key design and regime parameters for sandwich belt high-angles conveyors: width and type of a belt, belt elasticity moduli, motor capacity, load distribution between conveyor circuits, radii of transition branches, etc. The article considers some issues of substantiation of key design and regime parameters for sandwich belt high-angles conveyors. It is shown that currently such problems as an increase in productivity of a conveyor at the same width and velocity of a belt, selection of radii for transition branches, load distribution between cargo-carrying and pressure circuits, or a decrease in conveyor-belt slip have been solved. It is emphasized that costs of a sandwich belt and its power supply are the same or even less than in case of a standard belt conveyor, and an increased metal consumption of sandwich belt high-angles conveyors (by 65–70 %) is compensated by an appreciable reduction in the length of the equipment for the same height hoist. Thus, in view of the aforesaid, it is possible to state that there are pre-conditions for manufacture of sandwich belt high-angles conveyors in Russia, which will offer domestic deep open pit mines the economically efficient advanced transport equipment.

keywords Sandwich belt high-angle conveyors, productivity, elastic properties of belts, open pits, multiple-ply belts, steel-cable belts, belt stress–strain state, belt loading, belt elasticity modulus
References

1. Snitka N. P., Kolomnikov S. S., Sytenkov V. N. High-angle conveyor — realities of innovation development of mining technologies. Ratsionalnoe osvoenie nedr. 2011. No. 2. pp. 48–53.
2. Shemetov P. A., Sanakulov K. S. Development of conveyor ore transportation on the basis of high-angle conveyors in deep open pits. Gornyi Zhurnal. 2011. No. 8. pp. 43–52.
3. Loginov I. G., Slepyan V. I. Experience of creation of conveyor lift for rock mass transportation from open pit. Gornyi Zhurnal. 2008. No. 4. pp. 48–52.
4. Gruji M., Erdeljan D. Advantages of High Angle Belt Conveyors (Hac) in Mining. Applied Mechanics and Materials. 2014. Vol. 683. pp. 73-77. doi: 10.4028/www.scientific.net/AMM.683.73
5. Sandwich Belt High Angle Conveyor for… Mining & In Pit Crushing Conveying: project. Available at: http://bevconwayors.com/product/sandwich-belt-high-angleconveyor-for-mining-in-pit-crushing-conveying/ (accessed: 15.11.2016).
6. Santos J. A. Sandwich Belt High Angle Conveyors Coal Mine to Prep Plant and Beyond. XVIII International Coal Preparation Congress, 28 June – 1 Jule 2016. Switzerland : Springer, 2016. pp. 111–118. doi: 10/1007/978-3-319-40943-6.
7. Kucherskiy N. I., Malgin O. N., Sytenkov V. N., Larionov E. D, Ioffe A. M., Shelepov V. I. Efficiency of designed complex of cyclical-and-continuous method — ore with high-angle conveyor for Muruntau open pit. Gornyi Zhurnal. 2005. No. 11. pp. 59–63.
8. Sanakulov K. S., Umarov F. Ya., Shemetov P. A. Cost reduction in deep open pits on the basis of application of high-angle conveyors in composition of conveyor ore transportation complex. Gornyy vestnik Uzbekistana. 2012. No. 2. pp. 8–12.
9. Dos Santos M. J. Proven performance... lost opportunity. Mining Magazine. 2008. Vol. 199, Iss. 3. pp. 17–21.
10. Dos Santos J. A. The cost and value of high-angle conveying: A comparison of economics for different conveying paths. Bulk Solids Handling. 2013. Vol. 33, Iss. 1. pp. 18–23.
11. Kirichenko A. I., Dzerzhinskiy V. A., Kartavyy A. N. Powerful Sandwich Belt High Angle Conveyor for “Muruntau” Quarry (Navoi Mining and Metallurgical Integrated Works). Gornoe oborudovanie i elektromekhanika. 2012. No. 1. pp. 23–28.
12. Dos Santos J. A. Sandwich Belt High Angle Conveyors According to the Expanded Conveyor Tehnology. Bulk Solids handling. 2000. Vol. 20, No. 1.
13. Malgin O. N., Shelepov V. I., Larionov E. D. Designing, structural and technological peculiarities of complex of conveyor ore transportation with high-angle conveyor elevator. Gornyi Zhurnal. 2013. No. 8-1. pp. 49–53.
14. Kasatkin A. A. The steeply inclined conveyer tracks modeling for the pressure belts deformation process justification. Gornyy informatsionno-analiticheskiy byulleten. 2009. No. 2. pp. 260–265.
15. Sheshko E. E., Kasatkin A. A. Influence of stress and strain state of high-angle conveyor belts with pressure belt on its working capacity. Gornyi Zhurnal. 2009. No. 1. pp. 79–82.
16. Atakulov L. N. Definition of rational parameters of the transition point of high-angle conveyor with pressure belt. Gornoe oborudovanie i elektromekhanika. 2007. No. 8. pp. 42–44.
17. Stanisic Z., Dos Santos J.A. In-Pit Crushing and High Angle Conveying at Copper Mine Majdanpek. Bulk Solids Handling. 1997. Vol. 17, No. 1. pp. 83–84.
18. Kartavyy A. N. High-angle belt conveyors for mining industry. Gornoe oborudovanie i elektromekhanika. 2006. No. 10. pp. 22–26.

Language of full-text russian
Full content Buy
Back