Журналы →  Gornyi Zhurnal →  2014 →  №9 →  Назад

«URALMEKHANOBR» JSC
Название Dressing technology for Tebinbulak iron ore
Автор Gazaleeva G. I., Sopina N. A., Mushketov A. A.
Информация об авторе

Author 1:

Name & Surname: Gazaleeva G. I.
Company: Uralmekhanobr JSC (Ekaterinburg, Russia)
Work Position: Deputy General Director for Science
Scientific Degree: Doctor of Engineering Sciences
Contacts: e-mail: umbr@umbr.ru

 

Author 2:

Name & Surname: Sopina N. A.
Company: Uralmekhanobr JSC (Ekaterinburg, Russia)
Work Position: Chief Dresser

 

Author 3:

Name & Surname: Mushketov A. A.
Company: Uralmekhanobr JSC (Ekaterinburg, Russia)
Work Position: Junior Researcher

Реферат

In 2012–2013 Uralmekhanobr developed the dressing technology and production procedure for a titaniummagnetite ore processing plant at the Tebinbulak deposit, Republic of Uzbekistan. The suggested scheme for crushing and dry magnetic separation of original ore with iron content of 16.1 % includes three stages of closed cycle crushing and dry magnetic separation within the fine milling stage. After dry separation it is possible to obtain 33.3 % of tailings -16 mm in size, with magnetic iron content under 1 %. Iron content of dry magnetic separation middlings is 19.5 %. The following cone crushes of the Uralmash manufacture are employed: stage I—KKD-1500/180; stage II—KSD-2200-T2-D; stage III—KMD-300 T. Rod mills are proposed for stage I crushing. The multi-staged wet magnetic separation is involved. The optimum size of the wet magnetic separation at stage I is 1 mm. The conditions for crushing and wet magnetic separation are approved on a pilot-plant equipment. After multistage crushing and magnetic separation of material with up to 95 % content of –0.071 mm grain size, the concentrate contained 66.6 % Fe, 3 % TiO2 and 0.66 % V2O5. The proposed scheme features the following advantages: to 45 % of tailings is extracted at the first stage of dressing; use of equipment of high unit capacity; no concentrate thickening stage; dewatering of wet magnetic separation tailings.

Ключевые слова Titanium-magnetite ore, magnetic properties, process flow diagrams, crushing, milling, magnetic separation
Библиографический список

1. Kochnev V. G. Melnitsa samoizmelcheniya konsolnogo tipa (Autogenous tumbling console mill). Zoloto i tekhnologii = Gold and Technologies. 2013. No. 1. pp. 34–42.
2. Gazaleeva G. I., Sopina N. A., Mushketov A. A. (sr), Mushketov A. A. (jr). Razrabotka tekhnologii obogashcheniya titanomagnetitovoy rudy mestorozhdeniya Tebinbulak (Development of technology of concentration of titaniummagnetite ore of Tebinbulak deposit). Materialy XVIII mezhdunarodnoy konferentsii «Nauchnye osnovy i praktika pererabotki rud i tekhnogennogo syrya» (Materials of the XVIII International Conference «Scientific basis and practice of processing of ores and technogenic raw materials»). Ekaterinburg, 2013. pp. 150–153.
3. Makushev S. Yu., Kanaev I. V., Cherepanov D. V. Drobilno-obogatitelnaya fabrika Otkrytogo Aktsionernogo Obshchestva «EVRAZ KGOK» (Crushing-and-concentration plant of “EVRAZ KGOK” JSC). Gornyi Zhurnal = Mining Journal. 2013. No. 9/1. pp. 13–16.

Language of full-text русский
Полный текст статьи Получить
Назад