Journals →  Gornyi Zhurnal →  2013 →  #12 →  Back

PROCESSING AND COMPLEX USE OF MINERAL RAW MATERIALS
ArticleName Improvement of process flowsheets of jigging and concentration on tables during the concentration of gold-containing raw materials
ArticleAuthor Evdokimov S. I.
ArticleAuthorData

North Caucasian Mining and Metallurgical Institute – State Technological University (Vladikavkaz, Russia):

Evdokimov S. I., Assistant Professor, Candidate of Engineering Sciences, e-mail: eva-ser@mail.ru

Abstract

Scheme of movement of concentration products, which makes it possible to increase the content of valuable component in rough concentrate production operation, was developed for the purpose of increasing of efficiency of jigging and concentration processes on tables. Necessity of increasing of the content of extracted components in the head of the process is defined by the dependence between the metal content in initial raw materials, its extraction and quality of concentrate. Laboratory conditions have defined, that during the concentration of copper-sulphide ores, containing 1.5 g/t of gold, the additional amount of 5.12% of gold can be extracted in the “grinding-classification” cycle with application of short-cone hydrocyclones and concentration tables. Total extraction of gold from mill discharging by the scheme “short-cone hydrocyclones jigging of sands of short-cone hydrocyclones regrinding of jigging concentrate concentration on tables” is increased to 9,89 %. Operation of jigging machine with circulation of the part of rough concentrate is the distinctive feature of developed process flowsheet. At the same time, concentration tables operate according to the scheme with jet motion of initial feeding and part of rough concentrate. Substantiation and reliability of conclusions and results is provided by the following factors:
-usage of modern equipment and tested methods;
-estimation of obtained results by methods of mathematical statistics;
-satisfactory comparability of results of laboratory researches and testings in industrial conditions;
-positive results of introduction.

keywords Gold-containing ore, gold-containing placer, concentration, jigging machine, short-cone hydrocyclone, concentration table, jet mode, closed cycle, increasing of technological indicators
References

1. Bogdanovich A. V., Fedotov K. V. Gornyi Zhurnal – Mining Journal, 2007, No. 2, pp. 51–57.
2. Vinogradov N. N. Novye napravleniya teorii i tekhnologii protsessa otsadki poleznykh iskopaemykh (New directions of theory and technology of the minerals jigging process). Sbornik dokladov VIII Mezhdunarodnogo kongressa po obogashcheniyu poleznykh iskopaemykh. Tom 1 (Collection of reports of the VIII International Congress on concentration of minerals. Volume 1). Leningrad, 1968, pp. 279–291.
3. Evdokimov S. I., Panshin A. M. Obogashchenie Rud – Mineral processing, 2008, No. 2, pp. 5–9.
4. Panshin A. M., Evdokimov S. I. Obogashchenie Rud – Mineral processing, 2011, No. 6, pp. 8–12.
5. Mitin L. A. Obogashchenie Rud – Mineral processing, 2002, No. 4, pp. 15–17.

Language of full-text russian
Full content Buy
Back