HEAVY NON-FERROUS METALS | |
ArticleName | Influence of calcium oxide on microhardeness and structure of high-ferruginous slags of autogenous melting |
ArticleAuthor | Selivanov E. N., Gulyaeva R. I., Zaripov R. Z., Belyaev V. V., Selmenskikh N. I. |
ArticleAuthorData | Institute of Metallurgy of Ural Branch of Russian Academy of Sciences, Ekaterinburg, Russia: E. N. Selivanov, Director, e-mail: pcmlab@mail.ru N. I. Selmenskikh, Researcher
V. V. Belyaev, Head of Department of Metallurgy of Strategic Planning Section |
Abstract | The purpose of this work is estimation of influence of calcium oxide on elemental composition and microhardness of phases, formed during the crystallization of slags of autogenous melting of copper-zinc concentrates in Vanyukov furnace. The influence of calcium oxide on microstructure and elemental composition of the phases, formed during the slags crystallization, was estimated by methods of metallography, X-ray radiography and spectral X-ray microanalysis. Measurement of phases' microhardness was carried out by Vickers method. The content of the basic elements in researched samples was changed in the following ranges: 36.9–39.4% of Fe, 3.3–10.3% of CaO, 26.7–36.5% of SiO2, 0.6–0.9% of Cu, 5.1–5.5% of Zn and 2.0% of S. It is shown that growth of CaO content in slags up to 10.3% leads to increasing of dispersity of its structure, formation of calciumcontaining pyroxene and replacement of fayalite by iron-calcium olivine. With increased concentrations of CaO, copper is mainly included in slags in the form of sulphides. Zinc is found as a component of oxide and dispersed sulfide (christophite) phases. Zinc content in olivine and pyroxene phases is decreased with growth of calcium oxide concentration up to 3.6 and 1.7%, respectively. When the slag is cooled, the release of (Fe, Zn)S phase, containing up to 50% of Zn is confirmed. On the basis of the data about microhardness and thermal expansion of phases, there was made an assumption about sulfides treatability during the grinding process as a stage of preparation of slag to flotation regrinding of non-ferrous metals. |
keywords | High-ferruginous slag, copper, zinc, calcium oxide, microstructure, phase composition, microhardness, metal existence forms |
References | 1. Vanyukov A. V., Bystrov V. P., Vaskevich A. D. et al. Plavka v zhidkoy vanne (Melting in liquid bath). Moscow : Metal lurgiya, 1988. 208 p. |
Language of full-text | russian |
Full content | Buy |