Journals →  Tsvetnye Metally →  2026 →  #1

Tsvetnye Metally



BENEFICIATION
ArticleName Depression of layered silicates flotation during gold-copper-magnetite ores processing
ArticleAuthors Sidorovich А. S., Кoval А. V.
ArticleAuthorsData

JSC Mekhanobr Engineering, Saint Petersburg, Russia

А. S. Sidorovich, Project Researcher, e-mail: sidorovich.as@mekhanobr.com
А. V. Кoval, Project Researcher, e-mail: koval.av@mekhanobr.com

KOLA MINING AND METALLURGICAL COMPANY: ON THE WAY OF SUSTAINABLE DEVELOPMENT
ArticleName On the possibility of natrization of the high-nickel precursor Ni0,87Co0,1Mn0,03(OH)2 to obtain cathode materials for sodium-ion batteries
ArticleAuthors Kosov Ya. I., Larina М. V., Shvedov S. N., Olyazaev А. E.
ArticleAuthorsData

LLC Institute Gipronikel, Saint Petersburg, Russia
Ya. I. Kosov, Chief Researcher, Candidate of Technical Sciences, e-mail: kosovyai@nornik.ru

 

Nornickel Sputnik LLC, Saint Petersburg, Russia
М. V. Larina, Chief Manager

 

NorNickel’s Polar Division, Norilsk, Russia
S. N. Shvedov, Senior Manager

 

JSC Kolskaya MMC, Monchegorsk, Russia
А. E. Olyazaev, Technologist

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Structure formation of cast endogenously reinforced aluminum matrix composite materials during complex treatment of melts by physical and chemical methods
ArticleAuthors Deev V. B., Prusov Е. S., Ri E. Kh., Ermakov М. А.
ArticleAuthorsData

Vladimir State University named after Alexander Grigorievich and Nikolai Grigorievich Stoletovs, Vladimir, Russia1 ; Moscow Polytechnic University, Moscow, Russia2 ; National University of Science and Technology MISIS, Moscow, Russia3

V. B. Deev*, Chief Researcher1, Head of the Department of Welding Production Technology and Equipment2, Professor of the Department of Metal Pressure Treatment3, Doctor of Technical Sciences, Professor, e-mail: deev.vb@mail.ru

 

Vladimir State University named after Alexander Grigorievich and Nikolai Grigorievich Stoletovs, Vladimir, Russia

Е. S. Prusov, Professor of the Department of Materials Science and Power Engineering, Doctor of Technical Sciences, Associate Professor

 

The Pacific National University, Khabarovsk, Russia

E. Kh. Ri, Head of the Higher School of Industrial Engineering of the Polytechnic Institute, Doctor of Technical Sciences, Professor

М. А. Ermakov, Associate Professor of the Higher School of Industrial Engineering of the Polytechnic Institute, Candidate of Technical Sciences

 

*Corresponding author.

ArticleName Abrasive wear resistance of aluminum matrix composite coatings
ArticleAuthors Krylova Т. А., Chumakov Yu. А.
ArticleAuthorsData

Institute of Strength Physics and Materials Science of the Siberian Division of the Russian Academy of Sciences, Tomsk, Russia1 ; Tomsk Scientific Center SB RAS, Tomsk, Russia2

Т. А. Krylova, Researcher1,2, Candidate of Technical Sciences, e-mail: kta@ispms.ru

 

Institute of Strength Physics and Materials Science of the Siberian Division of the Russian Academy of Sciences, Tomsk, Russia
Yu. А. Chumakov, Researcher, Candidate of Physical and Mathematical Sciences

MATERIALS SCIENCE
ArticleName Features of structure formation in the alloy D16 during asymmetric rolling
ArticleAuthors Raab G. I., Raab А. G., Tsenev N. К., Baryshnikhova А. М.
ArticleAuthorsData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

G. I. Raab, Chief Researcher of the Mechanics of Gradient Nanomaterials Laboratory, Doctor of Technical Sciences, Professor, e-mail: giraab@mail.ru

А. М. Baryshnikhova, Postgraduate Student of the Department of Metal Pressure Treatment named after M. I. Boyarshiov, e-mail: anyabar1999@mail.ru


Institute of Physics of Molecules and Crystals of the Ufa Federal Research Center of the Russian Academy of Sciences, Ufa, Russia
А. G. Raab, Chief Researcher of the Laboratory of Metal Physics, Candidate of Technical Sciences

 

Ufa State Petroleum Technological University, Ufa, Russia
N. К. Tsenev, Professor of the Department of Oil and Gas Well Drilling, Candidate of Physical and Mathematical Sciences

ArticleName Determining the criterion for connecting layers during double-sided cladding of rolled sheets made of Al – 2 Cu – 1.5 Mn – 1 Zn – 0.7 Mg – 0.4 Fe – 0.4 Si alloy with technically pure aluminum based on finite element analysis
ArticleAuthors Koshmin А. N., Zinoviev А. V., Khakimova А. N.
ArticleAuthorsData

Moscow Polytechnic University, Moscow, Russia

А. N. Koshmin, Associate Professor of the Scientific Activity Sector, Candidate of Technical Sciences, e-mail: koshmin.an@misis.ru

 

National University of Science and Technology MISIS, Moscow, Russia
А. V. Zinoviev, Leading Expert of the Scientific Project of the Department of Metal Pressure Treatment, Doctor of Technical Sciences, Professor
А. N. Khakimova, Master’s Student of the Department of Metal Pressure Treatment

ArticleName The effect of nitriding on the properties of VK10 hard alloy
ArticleAuthors Kozik Е. S., Svidenko Е. V.
ArticleAuthorsData

MIREA – Russian Technological University, Moscow, Russia

Е. S. Kozik, Associate Professor of the Department of Materials Engineering, Candidate of Technical Sciences, e-mail: ele57670823@yandex.ru

 

Orenburg State University, Orenburg, Russia
Е. V. Svidenko, Associate Professor of the Department of Material Science and Technology of Materials, Candidate of Technical Sciences, e-mail: tzvetkova.katia2016@yandex.ru

ArticleName The effect of the Mn/Fe ratio on the corrosion resistance of aluminum alloys of the Al – Mn system
ArticleAuthors Ivanova А. О., Belov N. А., Gradoboev А. Yu., Malakhova Yu. V.
ArticleAuthorsData

The National University of Science and Technology MISIS, Moscow, Russia

А. О. Ivanova, Postgraduate Student, e-mail: A.O.Ivanova7@gmail.com
N. А. Belov, Chief Researcher of the Department of Metal Pressure Treatment, Doctor of Technical Sciences, Professor
А. Yu. Gradoboev, Postgraduate Student

 

The National Research University “Belgorod State University”, Belgorod, Russia
Yu. V. Malakhova, Postgraduate Student

METAL PROCESSING
ArticleName Combined drawing with heating of the stress relaxing material
ArticleAuthors Chernyaev А. V., Chudin V. N.
ArticleAuthorsData

Tula State University, Tula, Russia
А. V. Chernyaev, Professor of the Department of Mechanics of Plastic Shaping, Doctor of Technical Sciences, e-mail: sovet01tsu@rambler.ru

 

Russian University of Transport (MIIT), Moscow, Russia

V. N. Chudin, Professor of the Department of Material Resistance and Structural Mechanics, Doctor of Technical Sciences

ArticleName Studying the fast-flowing mechanical and electrical processes in metals taking into account the electroplastic effect
ArticleAuthors Stashenko V. I., Skvortsov О. B.
ArticleAuthorsData

Mechanical Engineering Institute named after A. A. Blagonravov of the Russian Academy of Science, Moscow, Russia
V. I. Stashenko, Leading Researcher, Candidate of Physical and Mathematical Sciences, e-mail: vis20-11@rambler.ru
О. B. Skvortsov, Senior Researcher, Candidate of Technical Sciences, e-mail: oleg.b.skvorcov@gmail.com

ArticleName Application of magnetic abrasive polishing of rivet joints surfaces of aluminum alloy parts for aircraft
ArticleAuthors Maksarov V. V., Еfimovа М. V., Shakhnazarov К. Yu.
ArticleAuthorsData

Saint Petersburg Mining University of Empress Catherine II, Saint Petersburg, Russia

V. V. Maksarov, Dean of the Faculty of Mechanical Engineering, Doctor of Technical Sciences, Professor, e-mail: maks78.54@mail.ru
М. V. Еfimovа, Postgraduate Student of the Department of Mechanical Engineering, e-mail: mariyavomife@gmail.com
К. Yu. Shakhnazarov, Professor of the Department of Materials Science and Technology of Art Products, Doctor of Technical Sciences, Associate Professor, e-mail: Shakhnazarov_KYu@pers.spmi.ru

Journals →  Tsvetnye Metally →  2026 →  #1