Chernye Metally

Mineral Processing
ArticleName	Effect of finely dispersed component on the processing of iron-containing raw materials
ArticleAuthors	I. A. Grishin, E. Yu. Degodya, I. A. Pytalev, O. V. Zoteev, I. V. Shadrunova
ArticleAuthorsData	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia I. A. Grishin, Cand. Eng., Associate Prof., Head of the Dept. of Geology, Mine Surveying and Mineral Processing, e-mail: igorgri@mail.ru E. Yu. Degodya, Cand. Eng., Associate Prof., Dept. of Geology, Mine Surveying and Mineral Processing, e-mail: magur@mail.ru I. A. Pytalev, Dr. Eng., Prof., Director of the Institute of Mining and Transport, e-mail: vehicle@list.ru The Institute of Mining, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia O. V. Zoteev, Dr. Eng., Prof., Head of the Laboratory of Geodynamics and Rock Pressure Research Institute of Comprehensive Exploitation of Mineral Resources, Russian Academy of Sciences, Moscow, Russia I. V. Shadrunova, Dr. Eng., Prof., Head of the Mining Ecology Dept., e-mail: shadrunova_@mail.ru
Ironmaking
ArticleName	Improvement of blast furnace efficiency by including coke from MMK’s battery No. 12 in the charge
ArticleAuthors	A. V. Pavlov, A. S. Kharchenko, S. V. Yudina, S. K. Sibagatullin, V. K. Dubrovin
ArticleAuthorsData	Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia A. V. Pavlov, Cand. Eng., Head of Blast Furnace Shop Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia A. S. Kharchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy and Chemical Engineering, e-mail: as.mgtu@mail.ru S. V. Yudina, Postgraduate Student, Dept. of Metallurgy and Chemical Engineering S. K. Sibagatullin, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Engineering, e-mail: 10tks@mail.ru South Ural State University, Chelyabinsk, Russia. V. K. Dubrovin, Dr. Eng., Prof., Dept. of Pyrometallurgical and Foundry Technologies
ArticleName	Development of universal scale of flat sections of typical spatial shapes of graphite inclusions in cast iron
ArticleAuthors	T. A. Sivkova, A. G. Panov, V. A. Ivanova, N. G. Degtyareva
ArticleAuthorsData	SIAMS Company, Yekaterinburg, Russia T. A. Sivkova, Head of Engineering Department, e-mail: sivkova@siams.com Yaroslavl State Technical University, Yaroslavl, Russia A. G. Panov, Dr. Eng., Associate Prof., Prof., Dept. of Materials Technology, Standardization, and Metrology, e-mail: panov.ag@mail.ru V. A. Ivanova, Dr. Eng., Associate Prof., Director of the Institute of Engineering and Mechanical Engineering, e-mail: ivanovava@ystu.ru Modificator Research Center, Naberezhnye Chelny, Russia N. G. Degtyareva, Metallurgist, e-mail: dnadegda@list.ru
Rolling
ArticleName	Study of influence of geometric asymmetry on deformation heating during hot rolling
ArticleAuthors	K. S. Gorbunov, A. G. Levykina, L. V. Nosov, I. P. Mazur
ArticleAuthorsData	Lipetsk State Technical University, Lipetsk, Russia K. S. Gorbunov, Cand. Eng., Assistant, Dept. of Metal Forming, e-mail: beluivolk96@mail.ru A. G. Levykina, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: levikina48@yandex.ru Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia L. V. Nosov, Engineer, Scientific-Innovation Sector, A. P. Zhilyaev Research Laboratory “Mechanics of gradient nanomaterials”, e-mail: nosov.leopold@yandex.ru I. P. Mazur, Dr. Eng., Prof., Chief Researcher, Scientific-Innovation Sector, A. P. Zhilyaev Research Laboratory “Mechanics of gradient nanomaterials”, e-mail: mazur_ip@mail.ru
Foundry Production
ArticleName	Determination of technological parameters for manufacturing a back-up roll based on predicting the thermal state of the roll barrel-chill mold system
ArticleAuthors	K. V. Fochina, A. S. Savinov, I. V. Mikhalkina, S. M. Andreev, V. P. Chernov
ArticleAuthorsData	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia K. V. Fochina, Assistant, Dept. of Mechanics A. S. Savinov, Dr. Eng., Prof., Head of the Dept. of Mechanics, Director of the Institute of Metallurgy, Mechanical Engineering, and Materials Processing I. V. Mikhalkina, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science, e-mail: miv.mgtu@mail.ru S. M. Andreev, Dr. Eng., Head of the Dept. of Automated Control Systems V. P. Chernov, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science
Tubemaking
ArticleName	Development of adaptive system for controlling geometrical parameters of hot-rolled pipes based on machine vision technologies
ArticleAuthors	I. Yu. Pyshmintsev, E. A. Shkuratov, I. V. Kosmin, S. K. Rosolenko, G. A. Yashin
ArticleAuthorsData	TMK Research Center, Moscow, Russia I. Yu. Pyshmintsev, Dr. Eng., Prof., General Director E. A. Shkuratov, Cand. Eng., Head of the Digitalization and Artificial Intelligence Technologies Department, e-mail: evgeniy.shkuratov@tmk-group.com I. V. Kosmin, Research Engineer, Digitalization and Artificial Intelligence Technologies Department S. K. Rosolenko, Engineer, Digitalization and Artificial Intelligence Technologies Department G. A. Yashin, Development Engineer, Digitalization and Artificial Intelligence Technologies Department
Metal Science and Heat Treatment
ArticleName	Comparison of ShKh15 and ShKh15SG steels as alternative materials for manufacturing Common Rail fuel system parts
ArticleAuthors	M. N. Zenin, S. G. Ivanov, S. A. Zemlyakov, V. B. Deev, M. A. Guryev
ArticleAuthorsData	Polzunov Altai State Technical University, Barnaul, Russia M. N. Zenin, Junior Researcher, e-mail: mikhail.zenin.96@mail.ru Innovation Center for Modern Textile Technologies (Jianhu Laboratory), Shaoxing, China¹ ; Wuhan Textile University, Wuhan, China² ; Altai State University, Barnaul, Russia³ S. G. Ivanov, Dr. Eng., Leading Researcher¹, Leading Researcher, National Key Laboratory of Digital Textile Machinery, Hubei Province², Professor³, e-mail: serg225582@yandex.ru Wuhan Textile University, Wuhan, China¹ ; Jiangsu Suyang Packaging Co., Ltd, Yizheng City, Jiangsu, China² S. A. Zemlyakov, Cand. Eng., Leading Researcher, National Key Laboratory of Digital Textile Machinery, Hubei Province¹, Chief Researcher², e-mail: kobalt_20@mail.ru Wuhan Textile University, Wuhan, China¹ ; Moscow Polytechnic University, Moscow, Russia² ; Siberian State Industrial University, Novokuznetsk, Russia³ V. B. Deev^, Dr. Eng., Prof., National Key Laboratory of Digital Textile Machinery, Hubei Province¹, Head of the Dept. of Welding Equipment and Technologies²; Consulting Professor, Dept. of Ferrous Metallurgy and Chemical Engineering³, e-mail: deev.vb@mail.ru* Polzunov Altai State Technical University, Barnaul, Russia¹ ; Zhejiang Briliant Refrigeration Equipment Co., Ltd, Xingchang, China² M. A. Guryev, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology¹, Technical Director², e-mail: gurievma@mail.ru *Corresponding author
ArticleName	Investigation of the influence of heat treatment on the microstructure and mechanical properties of 35KhGSL steel for teeth and crowns of a quarry excavator
ArticleAuthors	B. S. Ermakov, O. V. Shvetsov, S. B. Ermakov, A. M. Zolotov, S. A. Vologzhanina
ArticleAuthorsData	Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia B. S. Ermakov, Dr. Eng., Head of the Materials Resources Laboratory, e-mail: ermakov_bs@spbstu.ru O. V. Shvetsov, Cand. Eng., Deputy Head of the Materials Resources Laboratory S. B. Ermakov, Cand. Eng., Research Engineer, Scientific and Technical Complex “New Technologies and Materials” A. M. Zolotov, Dr. Eng., Prof., Higher School of Physics and Materials Technology Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia S. A. Vologzhanina, Dr. Eng., Prof., Dept. of Materials Science and Technology of Art Products, e-mail: vologzhanina_sa@pers.spmi.ru
Powder Metallurgy and Additive Technologies
ArticleName	Technology for manufacturing composite materials in furnace by pressing with pause method
ArticleAuthors	Z. A. Namazova, S. A. Jafarova, E. A. Abdulazimova, A. J. Mansimov, B. B. Musurzayeva
ArticleAuthorsData	Azerbaijan Technical University, Baku, Azerbaijan Z. A. Namazova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Technology of Materials, e-mail: z_namazova76@mail.ru S. A. Jafarova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Technology of Materials, e-mail: saida.jafarova2011@gmail.com A. J. Mansimov, Cand. Eng., Associate Prof., Senior Lecturer, Dept. of Metallurgy and Technology of Materials, e-mail: akif.mensimov@bk.ru B. B. Musurzayeva, Senior Lecturer, Dept. of Metallurgy and Materials Technology, e-mail: musurzayeva71@mail.ru Baku Engineering University, Baku, Azerbaijan E. A. Abdulazimova, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: yabdulazimova@beu.edu.az
ArticleName	Structure formation in 08KhMFA steel by additive arc growth (WAAM)
ArticleAuthors	Yu. G. Kabaldin, M. S. Anosov, M. A. Chernigin, Yu. S. Mordovina
ArticleAuthorsData	Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia Yu. G. Kabaldin, Dr. Eng., Prof., Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering M. S. Anosov, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering, e-mail: anosov.ms@nntu.ru M. A. Chernigin, Engineer, Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering, e-mail: honeybadger52@yandex.ru Yu. S. Mordovina, Postgraduate Student, Lead Engineer, Institute for Retraining of Specialists, Assistant, Dept. of Mechanical Engineering Technological Complexes, Institute of Industrial Technologies in Mechanical Engineering, e-mail: ips4@nntu.ru
ArticleName	Additive technologies in toolmaking: A case of finishing gear cutting tools
ArticleAuthors	V. A. Belyakova, I. A. Vorobyov, G. A. Nuzhdin, S. M. Nikolsky
ArticleAuthorsData	Tula State University, Tula, Russia V. A. Belyakova, Cand. Eng., Associate Prof., e-mail: valentina.belyakova5@yandex.ru I. A. Vorobyov, Cand. Eng., Associate Prof., e-mail: imsilya@mail.ru S. M. Nikolsky, Postgraduate Student, e-mail: serg.nickolscky@yandex.ru SPC Tekhpolikom, Moscow, Russia G. A. Nuzhdin, Deputy General Director for Quality, e-mail: nuzhdin.65@mail.ru
Metal Physics
ArticleName	Changes in the properties of 20 grade sheet steel depending on rolled products thickness
ArticleAuthors	S. A. Tipalin, D. A. Gnevashev, N. D. Borisov, M. V. Bodnar, V. A. Klimov
ArticleAuthorsData	Moscow Polytechnic University, Moscow, Russia S. A. Tipalin, Cand. Eng., Prof., Dept. of Material Forming and Additive Technologies, e-mail: tsa_mami@mail.ru D. A. Gnevashev, Cand. Eng., Associate Prof., Dept. of Material Forming and Additive Technologies, e-mail: dengnevashev@mail.ru N. D. Borisov, Postgraduate Student, Dept. of Material Forming and Additive Technologies M. V. Bodnar, Postgraduate Student, Dept. of Material Forming and Additive Technologies V. A. Klimov, Postgraduate Student, Dept. of Material Forming and Additive Technologies
Coatings Application and Corrosion Protection
ArticleName	Modification of protective amorphized glass-enamel coating for steel pipelines to increase adhesion to steel
ArticleAuthors	E. A. Yatsenko, A. V. Ryabova, V. M. Kurdashov, V. D. Tkachenko
ArticleAuthorsData	Platov South-Russian State Polytechnical University, Novocherkassk, Russia E. A. Yatsenko, Dr. Eng., Prof., Head of the Dept. of General Chemistry and Technology of Silicates, Head of the Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: e_yatsenko@mail.ru A. V. Ryabova, Cand. Eng., Associate Prof., Dept. of General Chemistry and Technology of Silicates, Senior Researcher, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: annet20002006@yandex.ru V. M. Kurdashov, Postgraduate Student, Dept. of General Chemistry and Technology of Silicates, Engineer, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: viktorkurdashov@yandex.ru V. D. Tkachenko, Postgraduate Student, Dept. of General Chemistry and Technology of Silicates, Engineer, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: tkachenko.vadik2014@yandex.ru

Journals → Chernye Metally → 2025 → #12

Journals

CIS Iron and Steel Review

Museums