Journals →  Tsvetnye Metally →  2024 →  #6

Tsvetnye Metally



BENEFICIATION
ArticleName Processing of lithium-containing ore waste piles, producing high-quality spodumene concentrates
ArticleAuthors Fedotov E. N., Urazova Yu. V., Tiunov M. Yu., Burdonov A. E.
ArticleAuthorsData

Irkutsk National Research Technical University, Irkutsk, Russia1 ; JSC Irgiredmet, Irkutsk, Russia2

E. N. Fedotov, Postgraduate Student of the Leonov Department of Minerals Processing and Environment Protection1, Junior Researcher of the Group of Dressing of Rare and Rare Earth Metal Ores2, e-mail: FedotovEN@irgiredmet.ru

 

JSC Irgiredmet, Irkutsk, Russia
Yu. V. Urazova, Junior Researcher of the Group of Dressing of Rare and Rare Earth Metal Ores, e-mail: urazova@irgiredmet.ru
M. Yu. Tiunov, Head of the Group of Dressing of Rare and Rare Earth Metal Ores, e-mail: tmu@irgiredmet.ru

 

Irkutsk National Research Technical University, Irkutsk, Russia

A. E. Burdonov, Associate Professor of the Leonov Department of Minerals Processing and Environment Protection, Candidate of Technical Sciences, e-mail: slimbul@inbox.ru

HEAVY NON-FERROUS METALS
ArticleName Study on the technology of direct atmospheric leaching of a zinc concentrate
ArticleAuthors Lyakh S. I., Fomenko I. V., Varganov M. S., Zagrebin S. A.
ArticleAuthorsData

LLC Research Center Hydrometallurgy, Saint Petersburg, Russia

S. I. Lyakh, Chief Engineer, Candidate of Technical Sciences, e-mail: lyakh-s@gidrometall.ru
I. V. Fomenko, General Director, Candidate of Technical Sciences, e-mail: fomenko-i@gidrometall.ru

 

JSC Chelyabinsk Zinc Plant, Chelyabinsk, Russia
M. S. Varganov, Head of the Technical Administration, e-mail: mkv@zinc.ru
S. A. Zagrebin, Deputy Head of the Technical Administration, Candidate of Chemical Sciences, e-mail: saz@zinc.ru

NOBLE METALS AND ALLOYS
ArticleName p – T – x-diagram of the Au – Zn system
ArticleAuthors Alymov M. I., Levinskiy Yu. V., Vershinina E. V.
ArticleAuthorsData

Merzhanov Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences, Chernogolovka, Russia

M. I. Alymov, Director, Professor, Doctor of Technical Sciences, Corresponding Member of the Russian Academy of Sciences
Yu. V. Levinskiy, Lead Researcher, Professor, Doctor of Technical Sciences, e-mail: levinsky35@mail.ru

 

D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia
E. V. Vershinina, Associate Professor, Candidate of Technical Sciences

RARE METALS, SEMICONDUCTORS
ArticleName Prospects for processing deactivated Co – Mо/Al2O3 catalyst of diesel hydrotreating
ArticleAuthors Konkova T. V., Gaydukova A. M., Liberman E. Yu., Stoyanova A. D.
ArticleAuthorsData

Mendeleev Russian University of Chemical Technology, Moscow, Russia
T. V. Konkova, Professor of the Department of Technologies of Inorganic Substances and Electrochemical Processes, Doctor of Technical Sciences, e-mail: kontat@list.ru
A. M. Gaydukova, Associate Professor of the Department of Technologies of Inorganic Substances and Electrochemical Processes, Candidate of Technical Sciences, e-mail: GaydukovaAM@yandex.ru
E. Yu. Liberman, Professor of the Department of Technologies of Inorganic Substances and Electrochemical Processes, Doctor of Technical Sciences, e-mail: el-liberman@mail.ru
A. D. Stoyanova, Associate Professor of the Department of Technologies of Inorganic Substances and Electrochemical Processes, Candidate of Technical Sciences, e-mail: stoyanova.a.d@mail.ru

ArticleName Concentration of non-ferrous and rare earth metals from liquid waste from tungsten ore processing
ArticleAuthors Sanzhanova S. S., Plyusnin A. M.
ArticleAuthorsData

Russian Academy of Sciences Geological Institute of SB RAS, Ulan-Ude, Russia

S. S. Sanzhanova, Researcher, Candidate of Technical Sciences, e-mail: sanzhanova7@rambler.ru
A. M. Plyusnin, Head of the Laboratory, Doctor of Geological and Mineralogical Sciences

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Influence of hardening on mechanical properties of hard alloy VK8
ArticleAuthors Kozik E. S., Svidenko E. V.
ArticleAuthorsData

Orenburg State University, Orenburg, Russia
E. S. Kozik, Associate Professor, Candidate of Technical Sciences, e-mail: ele57670823@yandex.ru
E. V. Svidenko, Associate Professor, Candidate of Technical Sciences, email: tzvetkova.katia2016@yandex.ru

MATERIALS SCIENCE
ArticleName Study on the effect of zinc on the phase composition and the structure of Al – Ca – Ce alloys
ArticleAuthors Naumova E. A., Vasina M. A., Finogeev S. A., Bobrysheva A. O.
ArticleAuthorsData

National University of Science and Technology Moscow Institute of Steel and Alloys, Moscow, Russia

E. A. Naumova, Associate Professor of the Metal Forming Department, Candidate of Technical Sciences, e-mail: jan73@mail.ru
M. A. Vasina, Project Engineer of the Metal Forming Department, Candidate of Technical Sciences
S. A. Finogeev, Postgraduate Student of the Metal Forming Department
A. O. Bobrysheva, Postgraduate Student of the Metal Forming Department

ArticleName Processes of compacting and forming a solid phase combination, when using various schemes of briquetting and subsequent thermocompression treatment of titanium alloy swarf
ArticleAuthor Zharov M. V.
ArticleAuthorData

Moscow Aviation Institute (National Research University), Moscow, Russia

M. V. Zharov, Associate Professor, Candidate of Technical Sciences, e-mail: MaximZharov@mail.ru

ArticleName The influence of calcium on phase composition, structure and strengthening of the wrought Al – 3.3 Mg – 0.7 Mn alloy
ArticleAuthors Doroshenko V. V., Aksenov A. A., Strekalina D. M., Gorlov L. E.
ArticleAuthorsData

Moscow Polytechnic University, Moscow, Russia

V. V. Doroshenko, Leading researcher, Dept. of Physics, Candidate of Technical Sciences, e-mail: v.doroshenko@mail.ru
A. A. Aksenov, Chief researcher, Dept. of Physics, Doctor of Technical Sciences, professor, e-mail: a.a.aksenov@mospolytech.ru
D. M. Strekalina, Leading researcher, Dept. of Physics, Candidate of Chemical Sciences, e-mail: d.m.strekalina@mospolytech.ru

 

University of Science and Technology MISIS, Moscow, Russia
L. E. Gorlov, Laboratory assistant-researcher, Dept. of Metallurgy of Non-Ferrous Metals, e-mail: gorlov@edu.misis.ru

METAL PROCESSING
ArticleName High-speed face milling features of deformable aluminum alloys
ArticleAuthors Khalimonenko A. D., Shmakova Yu. R., Admakina O. N., Kufaev V. G.
ArticleAuthorsData

Saint Petersburg Mining University, Saint Petersburg, Russia

A. D. Khalimonenko, Associate Professor of the Mechanical Engineering Department, Candidate of Technical Sciences, e-mail: Khalimonenko_AD@pers.spmi.ru

V. G. Kufaev, postgraduate student of the Mechanical Engineering Department, e-mail: kufaev1999@mail.ru

 

JSC Diakont, Saint Petersburg, Russia
Yu. R. Shmakova, Process Engineer, e-mail: shmakova.1999@list.ru

 

Saint Petersburg University of the Humanities and Social Sciences, Saint Petersburg, Russia
O. N. Admakina, Senior Lecturer of the Department of Computer Science and Mathematics, e-mail: spszk1@yandex.ru

Journals →  Tsvetnye Metally →  2024 →  #6