Chernye Metally

Mineral Processing
ArticleName	Production of high-manganese slag by reducing iron and phosphorus in ferromanganese ores with hydrogen
ArticleAuthors	N. Y. Kosdauletov, A. V. Roshchin, V. E. Roshchin
ArticleAuthorsData	South Ural State University, Chelyabinsk, Russia N. Y. Kosdauletov, Researcher of the Research Laboratory “Hydrogen Technologies in Metallurgy” A. V. Roshchin, Dr. Eng., Associate Prof., Leading Researcher, Dept. of Pyrometallurgical and Foundry Technologies V. E. Roshchin, Dr. Eng. Prof., Chief Researcher of the Research Laboratory "Hydrogen Technologies in Metallurgy", e-mail: roshchinve@susu.ru
Sintering
ArticleName	Intensification of the sintering process by rolling converter sludge onto the surface of pelletized charge granules
ArticleAuthors	V. G. Mikhailov, A. V. Karpov, A. A. Eremeev
ArticleAuthorsData	Lipetsk State Technical University, Lipetsk, Russia V. G. Mikhailov, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: valentinmikhailov@yandex.ru A. V. Karpov, Cand. Eng., Associate Prof., Chair for Metallurgical Technologies, e-mail: antonkrpv@rambler.ru A. A. Eremeev, Graduate Student, Dept. of Metallurgical Technologies
Casting and Foundry Production
ArticleName	The structure and shape of graphite inclusions in cast iron, affecting the durability of molds. Part 4
ArticleAuthors	V. A. Gulevsky, S. N. Tsurikhin, N. Yu. Miroshkin, N. A. Kidalov
ArticleAuthorsData	Volgograd Industrial College, Volgograd, Russia V. A. Gulevsky, Cand. Eng., Lecturer, e-mail: gulevskiy.v@mail.ru Volgograd State Technical University, Volgograd, Russia. S. N. Tsurikhin, Cand. Eng., Associate Prof., Dept. of Machinery and Foundry Technology N. Yu. Miroshkin, Head of the Laboratory of the Dept. of Machinery and Foundry Technology, e-mail: nikolays34rus@gmail.com N. A. Kidalov, Dr. Eng., Prof., Head of the Dept. of Machinery and Foundry Technology
ArticleName	Release red mud-based coatings for foundry steel molds
ArticleAuthors	T. R. Gilmanshina, T. A. Bogdanova, D. I. Yagodin, I. V. Dubova
ArticleAuthorsData	Siberian Federal University, Krasnoyarsk, Russia T. R. Gilmanshina, Cand. Eng., Associate Prof., e-mail: gtr1977@mail.ru T. A. Bogdanova, Cand. Eng., Associate Prof. I. V. Dubova, Cand. Eng., Associate Prof. Casting and mechanical plant "SKAD", Divnogorsk, Russia D. I. Yagodin, Executive Director
ArticleName	Increasing the strength properties of lignosulfonates with surfactants
ArticleAuthors	A. P. Firstov, O. I. Shevchenko
ArticleAuthorsData	Nizhny Tagil Technological Institute (branch) of the Ural Federal University named after the first President of Russia B. N. Yeltsin, Nizhny Tagil, Russia A. P. Firstov, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: first55@mail.ru O. I. Shevchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgical Technologies, e-mail: oleg.shevchenko@urfu.ru
Production of Pipes
ArticleName	Brief description of methods for assessing the compatibility of steels with hydrogen and test results of X52 and X70 LDP
ArticleAuthors	N. A. Devyaterikova, K. A. Laev, A. S. Tsvetkov, S. E. Dagaev
ArticleAuthorsData	PAO "TMK", Pervouralsk, Russia N. A. Devyaterikova, Chief Specialist, Center for Industrial Pipes, e-mail: n.devyaterikova@tmk-group.com K. A. Laev, Cand. Eng., Chief Specialist, Center for Industrial Pipe Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia A. S. Tsvetkov, Cand. Eng., Head of the Testing Laboratory of the Scientific and Technological Complex “New Technologies and Materials” of the Advanced Engineering School “Digital Engineering” S. E. Dagaev, Engineer of the Testing Laboratory of the Scientific and Technological Complex “New Technologies and Materials” of the Advanced Engineering School “Digital Engineering”
Metal Science and Metallography
ArticleName	The combined effect of boron additives and cooling conditions during solidification on the structure and properties of complex-alloyed white cast irons of the Cr – Mn – Ni – Ti system
ArticleAuthors	V. M. Kolokoltsev, E. V. Petrochenko, O. S. Molochkova
ArticleAuthorsData	Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia V. M. Kolokoltsev, Dr. Eng., Prof., Advisor to the Rector’s Office E. V. Petrochenko, Dr. Eng., Associate Prof., Dept. of Foundry Processes and Material Science, e-mail: evp3738@mail.ru O. S. Molochkova, Cand. Eng., Associate Prof., Dept. of Foundry Processes and Material Science, e-mail: opetrochenko@mail.ru
ArticleName	Behavior of bismuth and manganese sulfide in free-cutting steel
ArticleAuthors	A. I. Zhitenev, A. S. Rovbo, D. V. Nechaev, S. V. Ryaboshuk
ArticleAuthorsData	NLMK Group, Moscow, Russia A. I. Zhitenev, Cand. Eng., Head of Technological Projects, e-mail: zhitenev.ai1991@gmail.com Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia A. S. Rovbo, Engineer of the Scientific and Technological Complex “New Technologies and Materials”, e-mail: harchenko.annna@yandex.ru D. V. Nechaev, Research Engineer of the Scientific and Technological Complex “New Technologies and Materials”, e-mail: nechaev_dv@spbstu.ru S. V. Ryaboshuk, Senior Lecturer, e-mail: ryaboshuk_sv@spbstu.ru
ArticleName	Peculiarities of diffusion processes in explosion-welded bimetal steel 50Kh15М2F – steel 20 after high-temperature heating
ArticleAuthors	L. M. Gurevich, V. N. Arisova, V. O. Kharlamov
ArticleAuthorsData	Volgograd State Technical University, Volgograd, Russia L. M. Gurevich, Dr. Eng., Associate Prof., Head of the Dept. of Materials Science and Composite Materials, e-mail: mv@vstu.ru V. N. Arisova, Cand. Eng., Associate Prof., Dept. of Materials Science and Composite Materials V. O. Kharlamov, Cand. Eng., Associate Prof., Dept. of Equipment and Welding Technology
ArticleName	Influence of heat treatment mode on the structure of 07Kh25N13 austenitic steel obtained by the WAAM method
ArticleAuthors	Yu. G. Kabaldin, S. A. Sorokina, M. A. Chernigin, Yu. S. Mordovina, S. V. Perova
ArticleAuthorsData	Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia Yu. G. Kabaldin, Dr. Eng., Prof., Dept. of Technology and Equipment of Mechanical Engineering, Institute of Manufacturing Technologies in Machine Building S. A. Sorokina, Cand. Eng., Associate Prof., Dept. of Materials Science, Materials Technologies and Heat Treatment of Metals, Institute of Physical and Chemical Technologies and Materials Science Yu. S. Mordovina, Postgraduate Student, Engineer for the Educational Process of the Institute for Retraining of Specialists, Engineer of the Dept. of Technology and Equipment of Mechanical Engineering, Institute of Manufacturing Technologies in Machine Building Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia¹ ; Central Research Institute Burevestnik, Nizhny Novgorod, Russia² M. A. Chernigin, Postgraduate Student, Engineer, Dept. of Technology and Equipment of Mechanical Engineering, Institute of Manufacturing Technologies in Machine Building¹, Research Engineer of the 3rd Category², e-mail: honeybadger52@yandex.ru Nizhny Novgorod State Technical University named after. R. E. Alekseev, Nizhny Novgorod, Russia¹ ; RFNC – VNIIEF, Sarov, Russia² S. V. Perova, Postgraduate Student, Dept. of Technology and Equipment of Mechanical Engineering, Institute of Manufacturing Technologies in Machine Building¹, Industrial Engineer²
Additive Technologies and Powder Metallurgy
ArticleName	Study of influence of a longitudinal magnetic field on formed material density during additive shaping of products by an electric arc in a protective gas environment
ArticleAuthors	V. V. Kuts, A. V. Oleshitsky, A. N. Grechukhin, I. Y. Grigorov
ArticleAuthorsData	Southwest State University, Kursk, Russia V. V. Kuts, Dr. Eng., Prof., Dept. of Mechanical Engineering Technologies and Equipment, e-mail: kuc-vadim@yandex.ru A. V. Oleshitsky, Lecturer, Dept. of Mechanical Engineering Technologies and Equipment, e-mail: oav46@yandex.ru A. N. Grechukhin, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technologies and Equipment, e-mail: agrechuhin@mail.ru I. Yu. Grigorov, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technologies and Equipment, e-mail: grighorov.ighor@mail.ru
ArticleName	Hardness of consolidated powder steel 110G13 based on mechanically activated charges
ArticleAuthor	S. N. Sergeenko
ArticleAuthorData	Platov South-Russian State Polytechnic University (NPI), Novocherkassk, Russia S. N. Sergeenko, Cand. Eng., Associate Prof., e-mail: sergeenko@gmail.com
Ecology and Recycling
ArticleName	Granulation of open-hearth slag in conditions of reducing anthropogenic load on the environment
ArticleAuthors	N. V. Dzhevaga, O. L. Lobacheva
ArticleAuthorsData	Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia N. V. Dzhevaga, Cand. Chem., Associate Prof., Dept. of Geoecology, e-mail: dzhevaga331@mail.ru O. L. Lobacheva, Cand. Chem., Associate Prof., Dept. of General and Physical Chemistry
History of Metallurgy
ArticleName	The history of creation of the A-34 tank`s armor
ArticleAuthor	V. A. Bobkov
ArticleAuthorData	Bryansk branch of Plekhanov Russian University of Economics, Bryansk, Russia V. A. Bobkov, Dr. Hist., Associate Prof., Dept. of Theory, History of State and Law and Humanitarian Disciplines, e-mail: vladimir.bobkoff-2009@yandex.ru

Journals → Chernye Metally → 2024 → #2

Journals

CIS Iron and Steel Review

MPT International

Museums