Journals →  CIS Iron and Steel Review →  2023 →  #2

CIS Iron and Steel Review



Preparation of Raw Materials
ArticleName Comparative review on the technologies of briquetting, sintering, pelletizing and direct use of fines in processing of ore and technogenic materials
ArticleAuthor Yu. E. Kapelyushin
ArticleAuthorData

South Ural State University (Chelyabinsk, Russia)

Yu. E. Kapelyushin, PhD, Head of the Scientific and Research Laboratory “Physical-Chemistry and Gas Dynamics Problems”, Senior Researcher of the Scientific and Research Laboratory “Hydrogen Technologies in Metallurgy”, e-mail: kapelyushinye@susu.ru

ArticleName Experimental examination of the chemical-metallurgical roasting process for iron ore raw materials on the fire grate of a roasting conveyor machine
ArticleAuthors V. I. Bobkov, M. I. Dli, N. S. Kulyasov
ArticleAuthorsData

Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia)

V. I. Bobkov, Dr. Eng., Associate Prof., Head of the Dept. of Higher Mathematics, e-mail: vovabobkoff@mail.ru
M. I. Dli, Dr. Eng., Prof., Head of the Dept. of Information Technologies in Economics and Management, e-mail: midli@mail.ru

 

Plekhanov Russian University of Economics (Moscow, Russia)
N. S. Kulyasov, Cand. Econ., Leading Researcher of the Scientific and metological center "High School of Tariff Regulation", e-mail: Kulyasov.NS@rea.ru

ArticleName Study of the process of oxidizing-sodium roasting of industrial vanadium-containing ferrophosphorus and vanadium slags
ArticleAuthors Yu. I. Sukharnikov, D. K. Aitkulov, S. V. Ermishin, N. M. Seidakhmetova
ArticleAuthorsData

RSE "National Center for Integrated Processing of Mineral Raw Materials of the Republic of Kazakhstan" (Almaty, Kazakhstan)

Yu. I. Sukharnikov, Dr. Eng., Prof., Dept. of Metallurgy of Ferrous, Non-Ferrous and Rare Metals, Chief Researcher of the Laboratory of Silicon-Carbon Composites, e-mail: scc04@mail.ru
D. K. Aitkulov, Dr. Eng., Academician of the National Academy of Engineering of the Republic of Kazakhstan, Director of the Dept. of Scientific Research
S. V. Ermishin, Leading Engineer
N. M. Seidakhmetova, PhD, Senior Researcher of the Dept. of Scientific Research, e-mail: erkej@mail.ru

Mineral Processing
ArticleName Contrast range examination of rich iron ore from Mikhailovskoe deposit and evaluation of possibility of its preliminary concentration via physical methods
ArticleAuthors R. I. Ismagilov, T. I. Yushina. A. M. Dumov
ArticleAuthorsData

"Metalloinvest" Holding Company (Moscow, Russia)

R. I. Ismagilov, Director on Technical Development

 

National University of Science and Technology MISIS (Moscow, Russia)
T. I. Yushina, Cand. Eng., Associate Prof., Head of Dept. of Mineral Processing and Technogenic Raw Materials, e-mail: yuti1962@mail.ru
A. M. Dumov, Cand. Eng., Associate Prof., Dept. of Mineral Processing and Technogenic Raw Materials

Continuous Casting
ArticleName A model of automated mold flux feeding into the crystallizer of a continuous casting machine
ArticleAuthors K. V. Litsin, S. N. Baskov, D. A. Morkovnik
ArticleAuthorsData

South Ural State University (Chelyabinsk, Russia)

K. V. Litsin, Cand. Eng., Associate Prof., Dept. of Electric Drive, Mechatronics and Electromechanics, e-mail: k.litsin@rambler.ru
S. N. Baskov, Cand. Eng., Associate Prof., Dept. of Electric Drive, Mechatronics and Electromechanics, e-mail: sbaskov@mail.ru
D. A. Morkovnik, Student, Dept. of Electric Drive, Mechatronics and Electromechanics, e-mail: d.morkovnik@mail.ru

Casting and Material Science
ArticleName Managing the properties of cast products made from alloys of various structural classes using nitrided materials
ArticleAuthor N. A. Feoktistov
ArticleAuthorData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

N. A. Feoktistov, Cand. Eng., Associate Prof., Head of the Dept. of Foundry production and Material Science, e-mail: fna87@mail.ru

ArticleName An approach to calculating the casting temperature of high-manganese austenite steel
ArticleAuthors S. L. Arapov, S. V. Belyaev, A. A. Kosovich, E. G. Partyko
ArticleAuthorsData

LLC Engineering Construction Maintenance (Russia, Achinsk)1 ; Siberian Federal University (Russia, Krasnoyarsk)2

S. L. Arapov, Chief Metallurgist1, Junior Researcher2, e-mail: arapovsl@yandex.ru

 

Siberian Federal University (Russia, Krasnoyarsk)
S. V. Belyaev, Dr. Eng., Prof., Head of Foundry Department, e-mail: 244812@mail.ru
A. A. Kosovich, Cand. Eng., Associate Prof., Senior Researcher, e-mail: akosovich@sfu-kras.ru
E. G. Partyko, Cand. Eng., Associate Prof., Junior Researcher, e-mail: elforion@mail.ru

Rolling
ArticleName Features of finite element modeling for hot rolling process of clad sheets and strips
ArticleAuthors A. G. Zinyagin, N. R. Borisenko, A. V. Muntin, M. O. Kruychkova
ArticleAuthorsData

Bauman Moscow State Technical University (Moscow, Russia)

A. G. Zinyagin, Cand. Eng., Associate Prof., e-mail: ziniagin_ag@bmstu.ru
N. R. Borisenko, Post Graduate, e-mail: BorisenkoNikita17@yandex.ru
A. V. Muntin, Cand. Eng., Associate Prof., e-mail: muntin_av@bmstu.ru
M. O. Kryuchkova, Senior Lecturer, e-mail: mariya.mironova@bmstu.ru

ArticleName The effect of laser hardening on the operation resistance of rolls of multi-roll mills and the quality of the rolling strip
ArticleAuthors N. A. Chichenev, M. V. Vasilyev, A. O. Karfidov, O. N. Chicheneva
ArticleAuthorsData

National University of Science and Technology “MISIS” (Moscow, Russia)

N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering Technology Equipment, e-mail: chich38@mail.ru
M. V. Vasilyev, Senior Lecturer, Dept. of Engineering Technology Equipment, e-mail: mv@karfidovlab.com
A. O. Karfidov, Head of Dept. of Engineering Technology Equipment, e-mail: a.korf@mail.ru
O. N. Chicheneva, Cand. Eng., Associate Prof., Dept. of Engineering Technology Equipment, e-mail: ch-grafika@mail.ru

ArticleName Experience of putting into practice and development prospects of digital twins in section rolling technological systems
ArticleAuthors S. A. Levandovskiy, A. B. Moller, O. N. Tulupov, N. A. Baranov.
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

S. A. Levandovskiy, Cand. Eng., Associate Prof., Dept. of Metal Processing Technologies, e-mail: levandovskiy@mail.ru
A. B. Moller, Dr. Eng., Prof., Head of Dept. of Metal Processing Technologies, e-mail: amoller@mail.ru
O. N. Tulupov, Dr. Eng., Prof., Vice-Rector for Research and Innovations
N. A. Baranov, Post-Graduate, Dept. of Metal Processing Technologies

Metal Science and Metal Physics
ArticleName Development of the heat treatment mode for TRIP steel additionally alloyed with aluminium
ArticleAuthors D. A. Gorlenko, O. A. Kupriyanova, K. G. Pivovarova, M. A. Polyakova
ArticleAuthorsData

Nosov Magnitigorsk State Technical University (Magnitogorsk, Russia)

D. A. Gorlenko, Cand. Eng., Associate Prof., Dept. of Foundry Production and Material Science, e-mail: d.gorlenko@magtu.ru
O. A. Kupriyanova, Cand. Eng., Associate Prof., Dept. of Material Processing Technologies, e-mail: o.nikitenko@magtu.ru
K. G. Pivovarova, Dr. Eng., Associate Prof., Dept. of Material Processing Technologies, e-mail: k.pivovarova@magtu.ru
M. A. Polyakova, Dr. Eng., Associate Prof., Dept. of Material Processing Technologies, e-mail: m.polyakova@magtu.ru

ArticleName Perspective high-strength pipe steel with increased corrosion cold resistance
ArticleAuthors P. P. Poletskov, N. V. Koptseva, A. S. Kuznetsova, D. Yu. Alekseev
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

P. P. Poletskov, Dr. Eng., Prof., Dept. of Material Processing Technology
N. V. Koptseva, Dr. Eng., Prof., Dept. of Foundry Production and Materials Science
A. S. Kuznetsova, Cand. Eng., Senior Researcher, Dept. of Material Processing Technologies
D. Yu. Alekseev, Engineer, Dept. of Material Processing Technologies, e-mail: allakuznetsova.mgtu@mail.ru

ArticleName Study of phase and structural transformations in overcooled austenite for high-strength cold resistant steel during continuous cooling
ArticleAuthors Yu. Yu. Efimova, D. G. Emaleeva, A. E. Gulin, P. G. Adishchev.
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Material Material Processing Technology
D. G. Emaleeva, Cand. Eng., Associate Prof., Dept. of Material Material Processing Technology
A. E. Gulin, Cand. Eng., Associate Prof., Dept. of Material Processing Technology, e-mail: a.gulin@magtu.ru
P. G. Adishchev, Post-Graduate, Dept. of Material Material Processing Technology

ArticleName Influence of thermal effect on the structure and properties of die steel 70Kh3G2FTR(m)
ArticleAuthors S. E. Krylova, E. V. Romashkov, I. V. Shchetinin, A. S. Fortuna
ArticleAuthorsData

Orenburg State University (Orenburg, Russia)

S. E. Krylova, Dr. Eng., Prof., Director of the Scientific and Educational Center of New Materials and Advanced Technologies
E. V. Romashkov, Cand. Eng., Senior Researcher of the Scientific and Educational Center of New Materials and Advanced Technologies, e-mail: evgeniyromashkov@yandex.ru

 

National University of Science and Technology MISIS (Moscow, Russia)
I. V. Shchetinin, Cand. Eng., Associate Prof., Dept. of Physical Materials Science
A. S. Fortuna, Post-graduate Student, Assistant Lecturer, Dept. of Physical Materials Science

ArticleName Formation of microscopic internal stresses in rails during long-term operation
ArticleAuthors V. E. Gromov, M. A. Porfiryev, R. E. Kryukov, V. V. Shlyarov
ArticleAuthorsData

Siberian State Industrial University (Novokuznetsk, Russia)

V. E. Gromov, Dr. Phys.-Math., Prof., Head of the Dept. of Natural Sciences named after prof. V. M. Finkel, e-mail: gromov@physics.sibsiu.ru
M. A. Porfiryev, Researcher, e-mail: mporf372@gmail.com
R. E. Kryukov, Cand. Eng., Associate Prof., Dept. of Metallurgy of Ferrous Metals, e-mail: rek_nzrmk@mail.ru
V. V. Shlyarov, Postgraduate Student, Dept. of Natural Sciences named after prof. V. M. Finkel, e-mail: shlyarov@mail.ru

ArticleName Optimal distribution of capsules with active substance for the crack detection system in a turbine blade body
ArticleAuthors I. K. Andrianov, E. K. Chepurnova
ArticleAuthorsData

Komsomolsk-na-Amure State University (Komsomolsk-na-Amure, Russia)

I. K. Andrianov, Cand. Eng., Associate Prof., Aircraft Engineering Dept., e-mail: ivan_andrianov_90@mail.ru
E. K. Chepurnova, Graduate Student, Aircraft Engineering Dept., e-mail: el.chep@bk.ru

ArticleName Mathematical description of the lines of monovariant phase equilibria on the MnO-SiO2 phase equilibrium diagram
ArticleAuthors V. V. Tolokonnikova, S. O. Baisanov, Zh. K. Saulebek, A. S. Orlov
ArticleAuthorsData

Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan)

V. V. Tolokonnikova, Cand. Chem., Chief Researcher, "Metallurgical melts" laboratory, e-mail: tolokon-splav@mail.ru
S. O. Baisanov, Dr. Eng., Prof., Director, Head of the "Metallurgical processes" laboratory, e-mail: splav_sailaubai2021@mail.ru
Zh. K. Saulebek, Master Student, 1st Category Engineer, e-mail: zhalgas.saulebek@bk.ru
A. S. Orlov, Dr. Eng., Senior Researcher of the Bor laboratory, e-mail: wolftailer@mail.ru

Coating application and Corrosion protection
ArticleName Study of electrochemical properties of austenitic chromium-nickel steel 12Kh18N10T in concentrated sulfuric acid
ArticleAuthors S. E. Zolotukhin, A. Yu. Kurbatov, V. N. Grunskiy, Yu. M. Averina
ArticleAuthorsData

 D. Mendeleev University of Chemical Technology of Russia (Moscow, Russia)

S. E. Zolotukhin, Cand. Eng., Associate Prof., Dept. of General Chemical Technology, e-mail: zolotukhin.s.e@muctr.ru
A. Yu. Kurbatov, Cand. Eng., Associate Prof., Dept. of Innovative Materials and Corrosion Protection
V. N. Grunskiy, Dr. Eng., Prof., Dept. of General Chemical Technology
Yu. M. Averina, Cand. Eng., Associate Prof., Dept. of Innovative Materials and Corrosion Protection

ArticleName Influence of diffusion alloying of structural steels by nickel and copper in the medium of low-melting liquid-metal solutions on their corrosion resistance
ArticleAuthors E. E. Bobylev, I. D. Storozhenko
ArticleAuthorsData

Kuban State Technical University (Krasnodar, Russia)

E. E. Bobylev, Cand. Eng., Associate Prof., e-mail: ebobylev@mail.ru
I. D. Storozhenko, Senior Lecturer

ArticleName The role of multi-phase metal content in corrosion and premature failure mitigation of steel equipment in oil refiniers. Part 2
ArticleAuthors B. Issa, V. Yu. Bazhin, K. G. Karapetyan
ArticleAuthorsData

Empress Catherine II St. Petersburg Mining University (St. Petersburg, Russia)

B. Issa, Cand. Eng., Assistant. Dept. of General and Physical Chemistry, e-mail: basharissashtain@gmail.com, basharissa3@gmail.com
V. Yu. Bazhin, Dr. Eng., Prof., Head of Metallurgy Dept., e-mail: bazhin-alfoil@mail.ru
K. G. Karapetyan, Dr. Eng., Associate Prof., Head of the Dept. of Chemical Technologies and Processing of Energy
Carriers, e-mail: kir64@list.ru

Journals →  CIS Iron and Steel Review →  2023 →  #2