Journals →  CIS Iron and Steel Review →  2023 →  #1

CIS Iron and Steel Review



Mineral Processing
ArticleName Investigation of the possibility of obtaining concentrate production targets based on a mathematical model of an ferrum ore processing site
ArticleAuthor N. V. Osipova
ArticleAuthorData

University of Science and Technology MISIS (Moscow, Russia):

N. V. Osipova, Cand. Eng., Associate Prof., Dept. of Infocommunication Technologies of the Institute of Computer Science, e-mail: nvo86@mail.ru

Sintering
ArticleName Effects of alumina on the stability of ferrite–calcium sinter with dicalcium silicate
ArticleAuthors I. N. Pyagay, A. B. Lebedev
ArticleAuthorsData

Empress Catherine II St. Petersburg Mining University (St. Petersburg, Russia):

I. N. Pyagay, Dr. Eng., Senior Researcher, Director of Scientific Center “The problems of processing of mineral and
technogenic resources”, e-mail: igor-pya@yandex.ru
A. B. Lebedev, Cand. Eng., Researcher, Scientific Center “The problems of processing of mineral and technogenic resources”, e-mail: 2799957@mail.ru

Coke and Chemistry
ArticleName Research on the use of coke chemical production resin and its reducing properties to obtain copper powder for cladding lubricant
ArticleAuthors K. Zh. Zhumashev, A. K. Narembekova, A. D. Terlikbaeva, F. A. Berdikulova
ArticleAuthorsData

Zh. Abishev Chemical-Metallurgical Institute, a branch of RSE National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan (Karaganda, Kazakhstan):

K. Zh. Zhumashev, Dr. Eng., Head of the Laboratory, e-mail: innovaciya_zh@mail.ru

 

Abylkas Saginov Karaganda Technical University (Karaganda, Kazakhstan):
A. K. Narembekova, Cand. Eng., Associate Prof., e-mail: cpk-kru@mail.ru

 

RSE National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan
(Karaganda, Kazakhstan):
A. D. Terlikbaeva, Dr. Eng., Firdt Deputy General Director, e-mail: nc@cmrp.kz
F. A. Berdikulova, Cand. Eng., Director of the Dept. of Coordination of Scientific and Technical Projects and Programs, e-mail: nc@cmrp.kz

Smelting processes
ArticleName Smelting of vanadium-containing alloys with using non-standard reducing agents
ArticleAuthors E. N. Makhambetov, N. R. Vorobkalo, A. S. Baisanov, E. A. Mynzhasar
ArticleAuthorsData

Zh. Abishev Chemical and Metallurgical Institute (Karaganda, Kazakhstan):

E. N. Makhambetov, Dr. Eng., Head of the Laboratory of Ferroalloys and Recovery Processes

A. S. Baisanov, Cand. Eng., Prof., Head of Laboratory of Pyrometallurgical Processes

 

Zh. Abishev Chemical and Metallurgical Institute (Karaganda, Kazakhstan)1 ; Abylkas Saginov Karaganda Technical University (Karaganda, Kazakhstan)2:
N. R. Vorobkalo, Master Eng., Researcher, Laboratory of Pyrometallurgical Processes; Doctoral Student2, e-mail: nina.timirbaeva23@gmail.com

 

Karaganda Industrial University (Karaganda, Kazakhstan):
E. A. Mynzhasar, Master Eng., Doctoral Student

Ferroalloys
ArticleName Study of phase transformations during heating of briquetted mono-charge from chromiumcontaining materials and carbon reducing agents
ArticleAuthors E. Zh. Shabanov, A. S. Baisanov, R. T. Toleukadyr, I. S. Inkarbekova
ArticleAuthorsData

Zh. Abishev Chemical and Metallurgical Institute (Karaganda, Kazakhstan):

E. Zh. Shabanov, Ph. D. (Metallurgy), Head of Laboratory of Ferroalloys and Reduction Processes
A. S. Baisanov, Cand. Eng., Prof., Head of Pyrometallurgical Processes Laboratory
R. T. Toleukadyr, Master, Junior Research Assistant, Laboratory of Ferroalloys and Reduction Processes, corresponding author, e-mail: ruslan-94kz@mail.ru
I. S. Inkarbekova, Master, 1st Category Eng., Laboratory of Ferroalloys and Reduction Processes

Casting and Foundry
ArticleName Analysis of the solidification process of castings depending on their configuration and material of the mold
ArticleAuthors O. G. Prikhodko, V. B. Deev, A. I. Kutsenko, E. S. Prusov
ArticleAuthorsData

Siberian State Industrial University (Novokuznetsk, Russia):

O. G. Prikhodko, Cand. Eng., Associate Prof., Dept. of Quality and Innovations Management, Vice Rector on Development of the Main Education Programs, e-mail: prihodko_og@rambler.ru


National University of Science and Technology “MISIS” (Moscow, Russia)1 ; Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia)2 ; Wuhan Textile University (Wuhan, China)3:

V. B. Deev, Dr. Eng., Prof., Dept. of Metal Forming1, Chief Scientific Researcher2, Prof. of the Faculty of Mechanical Engineering and Automation3, e-mail: deev.vb@mail.ru


Siberian State Industrial University (Novokuznetsk, Russia):

A. I. Kutsenko, Cand. Eng., Associate Prof., Head of Digital Transformation Dept., e-mail: aik_mail@mail.ru

 

Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia):

E. S. Prusov, Cand. Eng., Associate Prof., Dept. “Technology of Functional and Structural Materials”, e-mail: eprusov@mail.ru

ArticleName Forming of the structure of binder film in waterglass mixtures depending on the setting method
ArticleAuthors N. A. Kidalov, N. V. Belova, A. A. Belov, A. S. Adamova
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

N. A. Kidalov, Dr. Eng., Prof., Head of Dept. “Machines and technology of casting production”, e-mail: mitlp@vstu.ru
N. V. Belova, Cand. Eng., Associate Prof., Dept. “Machines and technology of casting production”
A. A. Belov, Cand. Eng., Associate Prof., Dept. “Machines and technology of casting production”, e-mail: aa-belov@bk.ru
A. S. Adamova, Cand. Eng., Associate Prof., Dept. “Machines and technology of casting production”

Metal Forming and Tubemaking
ArticleName Device for two-way cooling of rolls of multi-roll mills during laser hardening
ArticleAuthors N. A. Chichenev, M. V. Vasilyev, A. O. Karfidov, O. N. Chicheneva
ArticleAuthorsData

National University of Science and Technology “MISIS” (Moscow, Russia):

N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering Technology Equipment, e-mail: chich38@mail.ru
M. V. Vasilyev, Senior Lecturer, Dept. of Engineering Technology Equipment, e-mail: mv@karfidovlab.com
A. O. Karfidov, Head of Dept. of Engineering Technology Equipment, e-mail: a.korf@mail.ru
O. N. Chicheneva, Cand. Eng., Associate Prof., Dept. of Engineering Technology Equipment, e-mail: ch-grafika@mail.ru

ArticleName Comparative evaluation of the kinematic parameters at symmetric and asymmetric cold rolling of strip using computer simulation
ArticleAuthors A. V. Kozhevnikov, M. M. Skripalenko, I. A. Kozhevnikova, M. N. Skripalenko
ArticleAuthorsData

Cherepovets State University (Cherepovets, Russia):

A. V. Kozhevnikov, Dr. Eng., Associate Prof., Head of the Dept. of Power Engineering and Electrical Engineering, e-mail: avkozhevnikov@chsu.ru

I. A. Kozhevnikova, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy, Mechanical Engineering and Technological Equipment, e-mail: iakozhevnikova@chsu.ru

 

National University of Science and Technology “MISIS” (Moscow, Russia):

M. M. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: mms@misis.ru
M. N. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: tfsmn@yandex.ru

ArticleName Use of machine learning methods for determinatuon of the boundary conditions coefficients in a FEM task for the case of accelerated cooling of hot-rolled sheet metal
ArticleAuthor A. G. Zinyagin
ArticleAuthorData

Bauman Moscow State Technical University (Moscow, Russia):

A. G. Zinyagin, Cand. Eng., Associate Prof., e-mail: ziniagin_ag@bmstu.ru

ArticleName Device for automatic marking of billets for large diameter pipe bends
ArticleAuthors N. S. Lyubimyi, M. S. Chepchurov, S. I. Antsiferov, A. A. Polshin
ArticleAuthorsData

Belgorod State Technological University named after V. G. Shukhov (Belgorod, Russia):

N. S. Lyubimyi, Cand. Eng., Associate Prof., Dept. of Carrying, Lifting and Road Machines, Transporting and Technological Institute, e-mail: nslubim@bk.ru
M. S. Chepchurov, Dr. Eng., Prof., Dept. of Machine-Building Technology, Institute of Technological Equipment and Machine-Building
S. I. Antsiferov, Cand. Eng., Associate Prof., Dept. of Mechanical Equipment, Institute of Technological Equipment and Machine-Building
A. A. Polshin, Post-Graduate Student, Dept. of Mechanical Equipmentm, Institute of Technological Equipment and Machine-Building

Metal Science and Metallography
ArticleName Influence of heat treatment on forming the complex of properties for high-strength cold-resistance steel
ArticleAuthors P. P. Poletskov, N. V. Koptseva, Yu. Yu. Efimova, A. S. Kuznetsova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

P. P. Poletskov, Dr. Eng., Prof., Dept. of Metal Processing Technology
N. V. Koptseva, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science
Yu. Yu. Efimova, Cand. Eng., Associete Prof., Dept. of Metal Processing Technology
A. S. Kuznetsova, Cand. Eng., Senior Researcher, Dept. of Metal Processing Technology, e-mail: allakuznetsova.mgtu@mail.ru

ArticleName The method of mathematical description of the phase composition diagrams
ArticleAuthors A. A. Akberdin, A. S. Kim, R. B. Sultangaziev, A. S. Orlov
ArticleAuthorsData

Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan):

A. A. Akberdin, Dr. Eng., Prof., Head of the Bor laboratory
A. S. Kim, Dr. Eng., Chief Researcher of the Bor laboratory
R. B. Sultangaziev, Dr. Eng., Senior Researcher of the Bor laboratory
A. S. Orlov, Dr. Eng., Senior Researcher of the Bor laboratory, e-mail: wolftailer@mail.ru

ArticleName Studying microstructure of heat-resistant alloy based on the Fe-Cr-Ni-alloying element system for manufacture of components for metallurgical equipment
ArticleAuthors Sv. S. Kvon, V. Yu. Kulikov, S. K. Arinova, E. P. Shcherbakova
ArticleAuthorsData

Karaganda Technical University (Karaganda, Kazakhstan):

Sv. S. Kvon, Cand. Eng., Prof., e-mail: svetlana.1311@mail.ru
V. Yu. Kulikov, Cand. Eng., Prof.
S. K. Arinova, Ph. D., Lecturer, e-mail: sanya_kazah@mail.ru
E. P. Shcherbakova, Ph. D., Senior Lecturer, e-mail: sherbakova_1984@mail.ru

 

The authors express their gratitude to D. R. Aubakirov, a doctoral student, senior lecturer of the Department of Nanotechnology and Metallurgy, for participating in this work.

Corrosion, Metal Protection and Heat Insulation
ArticleName The role of multi-phase metal content in corrosion and premature failure mitigation of steel equipment in oil refiniers. Part 1
ArticleAuthors B. Issa, V. Yu. Bazhin, K. G. Karapetyan
ArticleAuthorsData

Empress Catherine II St. Petersburg Mining University (St. Petersburg, Russia):

B. Issa, Post Graduate Student, Dept. of Metallurgy, e-mail: basharissashtain@gmail.combasharissa3@gmail.com
V. Yu. Bazhin, Dr. Eng., Prof., Head of Dept. of Automation of Technological Processes and Production, e-mail: bazhin-alfoil@mail.ru
K. G. Karapetyan, Dr. Eng., Associate Prof., Head of the Dept. of Chemical Technologies and Processing of Energy
Carriers, e-mail: kir64@list.ru

ArticleName The problems of protection and heat insulation of steel tanks which are used in hydrogen power engineering
ArticleAuthors E. A. Yatsenko, B. M. Goltsman, A. I. Izvarin, Yu. V. Novikov
ArticleAuthorsData

Platov South-Russian State Polytechnic University (NPI) (Novocherkassk, Russia):

E. A. Yatsenko, Dr. Eng., Prof., Head of the Dept. «General chemistry and technology of silicates», e-mail: e_yatsenko@mail.ru
B. M. Goltsman, Cand. Eng., Associate Prof., Dept. «General chemistry and technology of silicates», e-mail: boriuspost@gmail.com
A. I. Izvarin, Post-graduate Student, Dept. «General chemistry and technology of silicates», e-mail: andre.izvarin@yandex.ru
Yu. V. Novikov, Undergraduate Student, Eng. of the Laboratory «Fuel Energy Waste Recycling», e-mail: novikovtnv@yandex.ru

ArticleName Parameters of protective carbon films applied on high-speed steels M42 via magnetronic sputtering
ArticleAuthors A. E. Litvinov, V. Yu. Buzko, S. N. Ivanin, E. Yu. O. Balaev
ArticleAuthorsData

Kuban State Technological University (Krasnodar, Russia):

A. E. Litvinov, Dr. Eng., Associate Prof., Head of the Dept., e-mail: artstyleone@mail.ru

E. Yu. O. Balaev, Senior Lecturer, e-mail: balaev1122@mail.ru

 

Kuban State Technological University (Krasnodar, Russia)1 ; Kuban State University (Krasnodar, Russia)2:

V. Yu. Buzko, Cand. Chem., Associate Prof., Director of the Center for Advanced Technologies and Nanomaterials1,2
S. N. Ivanin, Cand. Chem., Researcher, Center for Advanced Technologies and Nanomaterials1,2

Chemical technologies
ArticleName Increase of efficiency of electroflotation extraction of low-soluble manganese compounds from water solutions in presence of flocculants of anion, cation and non-ion types
ArticleAuthors V. A. Brodskiy, D. Yu. Zhukov, Yu. O. Malkova
ArticleAuthorsData

Mendeleev University of Chemical Technology of Russia (Moscow, Russia):

V. A. Brodskiy, Cand. Chem., Senior Researcher, e-mail: vladimir_brodsky@mail.ru
D. Yu. Zhukov, Cand. Eng., Director of Technological Center “Ekokhimproekt”, e-mail: Zhukov.d.i@muctr.ru
Yu. O. Malkova, Leading Engineer, e-mail: jui77_77@mail.ru

Ecology and Recycling
ArticleName Ferrum extraction in cast iron via reduction smelting of red mud
ArticleAuthors N. V. Vasyunina, I. V. Dubova, K. E. Druzhinin, T. R. Gilmanshina
ArticleAuthorsData

Siberian Federal University (Krasnoyarsk, Russia):

N. V. Vasyunina, Cand. Eng., Associate Prof.
I. V. Dubova, Cand. Eng., Associate Prof.

T. R. Gilmanshina, Cand. Eng., Associate Prof., Head of the Dept. of Technosphere Safety of Mining and Metallurgical Production, e-mail: gtr1977@mail.ru

 

Elkor JSK (Krasnoyarsk, Russia):
K. E. Druzhinin, Director

 

Cand. Eng., Associate Prof. A. A. Kovaleva participated in this research.

Journals →  CIS Iron and Steel Review →  2023 →  #1