Chernye Metally
| Cast Iron Production | |
| ArticleName | Interrelation of gas blowing parameters of blast furnaces and the main quality indicators of coke in the conditions of JSC “Ural Steel” |
| ArticleAuthors | D. R. Ganin, A. Yu. Fuks |
| ArticleAuthorsData | Novotroitsk branch of the National University of Science and Technology “MISiS”, Novotroitsk, Russia: D. R. Ganin, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: dmrgan@mail.ru
Ural Steel, Novotroitsk, Russia: |
| Rolling and Metal Science | |
| ArticleName | Development of technology for production of new materials on traditional wide-strip hot rolling mills using modern methods of numerical and physical modeling. Part 2 |
| ArticleAuthors | I. S. Vasilyev, P. Yu. Zhikharev, A. V. Perestoronin, V. V. Mukhin |
| ArticleAuthorsData | Bauman Moscow State Technical University, Moscow, Russia:
PJSC Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia: |
| 40 years of the Department of "Mechanical Engineering" of the Naberezhnochelninsky Institute Kazan Federal University | |
| ArticleName | Formability of blanks from hot-rolled microalloyed steel plate with high yield strength |
| ArticleAuthors | V. G. Shibakov, D. L. Pankratov, A. M. Valiev, R. V. Shibakov |
| ArticleAuthorsData | Naberezhnye Chelny Institute of Kazan Federal University, Naberezhnye Chelny, Russia: V. G. Shibakov, Dr. Eng., Prof., Head of the Dept. “Mechanical Engineering”, e-mail: vladshib50@gmail.com |
| ArticleName | Hardening of long steel products by shot peening |
| ArticleAuthors | V. I. Astashchenko, G. F. Mukhametzyanova, V. E. Orlyansky, I. Zh. Kharisov |
| ArticleAuthorsData | Naberezhnye Chelny Institute of Kazan Federal University, Naberezhnye Chelny, Russia: V. I. Astashchenko, Dr. Eng., Prof., Dept. of Materials, Technologies and Quality, e-mail: astvi-52@mail.ru
PTC KAMAZ, Naberezhnye Chelny, Russia: |
| ArticleName | Technology and hardware design of remelting cast iron shavings by electroslag process |
| ArticleAuthors | N. N. Safronov, L. R. Kharisov, D. R. Aflyatonov |
| ArticleAuthorsData | Naberezhnye Chelny Institute of Kazan Federal University, Naberezhnye Chelny, Russia: N. N. Safronov, Dr. Eng., Prof., Dept. of Machine-building, e-mail: ln271@mail.ru |
| Metal Rolling and Other Metal Processing Processes | |
| ArticleName | Development of an automated system for stack cutting machine of rolling production |
| ArticleAuthors | A. V. Tsukanov, K. V. Litsin |
| ArticleAuthorsData | Orenburg State University, Orenburg, Russia: A. V. Tsukanov, Undergraduate, e-mail: 03-06-2000@mail.ru
South Ural State University (National Research University), Chelyabinsk, Russia1 ; Novotroitsk branch of NUST MISIS, Novotroitsk, Russia2: K. V. Litsin, Cand. Eng., Associate Prof. of Dep. "Electric Drive and Mechatronics"1, Associate Prof. of Dep. "Electric Power and Electrical Engineering"2, e-mail: k.litsin@rambler.ru |
| ArticleName | Development of situation models for duration of production cycles of manufacturing finished rolled products. Message 1 |
| ArticleAuthors | A. R. Fastykovsky, A. I. Musatova, S. M. Kulakov, N. V. Martyushev, A. I. Karlina |
| ArticleAuthorsData | Siberian State Industrial University, Novokuznetsk, Russia:
Tomsk Polytechnic University, Tomsk, Russia:
Moscow State University of Civil Engineering, Moscow, Russia: |
| Powder Metallurgy | |
| ArticleName | Planning experiments for heat treatment of products from powder steels in electrolytes |
| ArticleAuthors | S. I. Bogodukhov, E. S. Kozik, V. S. Garipov |
| ArticleAuthorsData | Orenburg State University, Orenburg, Russia: S. I. Bogodukhov, Dr. Eng., Prof., Dept. of Materials Science and Technology of Materials, e-mail: ogu@mailgate.ru |
| Physics of Metals | |
| ArticleName | Optimization of modes of pendular surface plastic deformation for intensification of the stress-strain state of carbon steel parts |
| ArticleAuthors | S. A. Zaides, Kho Min Kuan |
| ArticleAuthorsData | Irkutsk National Research Technical University, Irkutsk, Russia: S. A. Zaides, Dr. Eng., Prof., Dept. of Materials Science, Welding and Additive Technologies, e-mail: zsa@istu.edu |
| Mechanical Engineering Technologies | |
| ArticleName | Influence of magnetic-abrasive machining parameters on ceramic cutting tools for technological quality assurance of precision products from cold-resistant steels |
| ArticleAuthors | V. V. Maksarov, M. A. Popov, V. P. Zakharova |
| ArticleAuthorsData | St. Petersburg Mining University, St. Petersburg, Russia: |
| ArticleName | Tensile test of a specimen from different-thickness sheet material. |
| ArticleAuthors | A. N. Malyshev, V. D. Kukhar, A. V. Chernyaev, V. A. Korotkov |
| ArticleAuthorsData | Kaluga branch of Bauman MSTU (National Research University), Kaluga, Russia: A. N. Malyshev, Cand. Eng. Associate Prof. of the MK1 Dept. of Engineering Technologies
Tula State University, Tula, Russia: |
| Economics and Finance | |
| ArticleName | Management of the development of a metallurgical company on the basis of the algorithm of the pre-investment analysis |
| ArticleAuthors | V. S. Vasiltsov, M. S. Nysh, A. V. Solovieva |
| ArticleAuthorsData | Cherepovets State University, Cherepovets, Russia:
JSC Severstal Management, Cherepovets, Russia: |
