Journals →  Chernye Metally →  2021 →  #8

Chernye Metally


 

The Chernye Metally journal No. 8-2021 was published.

 

The issue is headed by the article written by NUST MISiS authors, dedicated to modernization of the process of transporting the finished mortar to the site for the service of ladles in the JSC Ural Steel blast furnace shop.

 

In the Steel production section, the existing methods of deoxidation and alloying of steel with aluminum are analyzed and the most promising methods of introduction of aluminum into an iron-carbon melt are proposed.

 

The Foundry and Metallurgy section presents articles on improving the efficiency of non-stick coatings, the influence of microstructural parameters on improving the toughness of 20 GL steel car castings, the study of metallurgical causes of small-diameter alloy steels wire breakage.

 

Noteworthy are the articles presented in the Heating and heat treatment section, which tell about the way to improve the thermal operation of heating walking beam furnaces and to study the effect of constant power loads on the strength of the "fitting-shell" joint made of 09G2S grade steel.

 

S.A. Roginko`s article in the Ecology and recycling section is devoted to the assessment of Russian ferrous metallurgy risks in the case of the introduction of a cross-border corrective carbon tax mechanism.

 

The traditional annual Yu. L. Adno`s review in the Economy and Finance section analyzes the state and main factors of development of Russian metallurgy in the pandemic, gives a brief assessment of prospects for the world metallurgy development.

 

This issue also includes publications in the Training and Personnel Policy and Mechanical Engineering Technologies sections.

 

Please find more details below, or order your printed or electronic version of the Journal.


Iron making
ArticleName Manipulator for feeding a box with liquid solution for repair of cast iron buckets at blast furnace shop of JSC Ural Steel
ArticleAuthors A. V. Nefedov, Yu. V. Novikova, O. N. Chicheneva
ArticleAuthorsData

National University of Science and Technology “MISiS”, Novotroitsk affiliate (Novotroitsk, Russia):

A. V. Nefedov, Deputy Director, Cand. Ped., Associate Prof., e-mail: cosnovotr@rambler.ru
Yu. V. Novikova, Student, e-mail: nfmisis@yandex.ru

 

National University of Science and Technology “MISiS” (Moscow, Russia):
O. N. Chicheneva, Cand. Eng., Associate Prof., e-mail: ch-grafika@mail.ru

Steel making
ArticleName Promising directions of using aluminum for steel deoxidation
ArticleAuthors Yu. A. Bublikov, A. V. Ivchenko, O. V. Zuev, A. V. Andryushkin
ArticleAuthorsData

National Metallurgical Academy of Ukraine (Dnepr, Ukraine):

Yu. A. Bublikov, Cand. Eng., Associate Prof., e-mail: yuriy.bublikov@gmail.com
A. V. Ivchenko, Cand. Eng., Senior Researcher

 

Baku Non Ferrous and Foundry Company Ltd. (Sumgait, Azerbaidzhan):
O. V. Zuev, Director

 

NPP Vasilkovskiy Ore Reduction Plant (Dnepr, Ukraine):
A. V. Andryushkin, Chief Technologist

Casting and metal science
ArticleName Advanced technologies for development of non-stick anti-burn coatings for iron casting
ArticleAuthors T. R. Gilmanshina, I. E. Illarionov, E. N. Zhirkov, T. A. Strekalova
ArticleAuthorsData

Siberian Federal University (Krasnoyarsk, Russia):
T. R. Gilmanshina, Cand. Eng., Associate Prof., e-mail: gtr1977@mail.ru
T. A. Strekalova, Cand. Eng., Associate Prof., Dept. of Man-caused Safety

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof., Head of the Dept. “Material science and metallurgical processes”, e-mail: tmilp@rambler.ru
E. N. Zhirkov, Post-graduate, Dept. “Material science and metallurgical processes”, e-mail: avgaustaf@mail.ru

ArticleName Microstructural parameters as indicators of reliability of car castings made of 20GL steel
ArticleAuthors R. A. Bogdanov, Yu. M. Markova
ArticleAuthorsData

Bryansk State Technical University (Bryansk, Russia):

R. A. Bogdanov, Cand. Eng., e-mail: lpim-bra@yandex.ru

 

National Research Center “Kurchatov Institute” – Central Research Institute of Structural Materials “Prometey” (St. Petersburg, Russia):
Yu. M. Markova, Leading Eng., e-mail: yulia.markova@inbox.ru

ArticleName On the effect of non-metallic inclusions in production of small diameter wires
ArticleAuthors V. A. Lutsenko, E. V. Parusov, T. N. Golubenko, O. V. Lutsenko
ArticleAuthorsData

Iron and Steel Institute of Z. I. Nekrasov NAS of Ukraine (Dnepr, Ukraine):

V. A. Lutsenko, Dr. Eng., Leading Researcher, e-mail: lutsenkovlad2@gmail.com
E. V. Parusov, Dr. Eng., Senior Researcher, Head of Dept.
T. N. Golubenko, Cand. Eng., Senior Researcher
O. V. Lutsenko, Cand. Eng., Researcher

Heating and Heat treatment
ArticleName Laser welding of new austenitic cryogenic corrosion-resistant steels alloyed with nitrogen
ArticleAuthors A. V. Belenkiy, M. Zh. Bogatova, S. I. Chibizova
ArticleAuthorsData

North Caucasus Mining and Metallurgical Institute (State Technological University) (Vladikavkaz, Russia):

A. M. Belenkiy, Dr. Eng., Prof., Dept. of Metallurgy of Non-ferrous Metals and Automation of Metallurgical Processes, e-mail: belenky.bam@yandex.ru

 

National University of Science and Technology “MISiS” (Moscow, Russia):
M. Zh. Bogatova, Graduate student, Dept. of Energy Efficient and Resource-Saving Industrial Technologies, e-mail: ma95bers@gmail.com
S. I. Chibizova, Cand. Eng., Associate Prof., Dept. of Energy Efficient and Resource-Saving Industrial Technologies, e-mail: s_kalimulina@mail.ru

ArticleName Influence of non-stationary heating on the strength of fittings made of 09G2S steel
ArticleAuthors Nguen Wang An, L. N. Moskalev, S. I. Ponikarov
ArticleAuthorsData

Kazan National Research Technological University (Kazan, Russia):
Nguen Wang An, Graduate student, Dept. of Machines and Apparatus of Chemical Production
L. N. Moskalev, Cand. Eng., Head of Laboratory, Dept. of Machines and Apparatus of Chemical Production, e-mail: lejnya@yandex.ru
S. I. Ponikarov, Dr. Eng., Prof., Head of Dept. of Machines and Apparatus of Chemical Production

Ecology and Recycling
ArticleName EU cross-border carbon tax: risks for Russian metallurgy
ArticleAuthor S. A. Roginko
ArticleAuthorData

Financial University under the Government of the Russian Federation (Moscow, Russia):

S. A. Roginko, Prof., head of the Center for Ecology and Development of the RAS Institute of Europe, e-mail: roginko@bk.ru

ArticleName Influence of metallurgical slag additives on proppants synthesis processes based on drilling muds
ArticleAuthors E. A. Yatsenko, B. M. Goltsman, A. A. Tretyak, A. A. Chumakov
ArticleAuthorsData

Platov South Russian State Polytechnic University (Novocherkassk, Russia):
E. A. Yatsenko, Dr. Eng., Prof., Head of “General Chemistry and Technology of Silicates” Dept., e-mail: e_yatsenko@mail.ru
B. M. Goltsman, Cand. Eng., Associate Prof., “General Chemistry and Technology of Silicates” Dept., e-mail: boriuspost@gmail.com
A. A. Tretyak, Dr. Eng., Prof., Dean of the Faculty of Geology, Mining and Oil-Gas Matter, e-mail: Alexandr_bngs@mail.ru
A. A. Chumakov, Post-Graduate, “General Chemistry and Technology of Silicates” Dept., e-mail: a-chumakov@mail.ru

Machine-building technologies
ArticleName Extraction of square box parts with lateral pushing and squeezing
ArticleAuthors Yu. V. Bessmertnaya, S. N. Larin
ArticleAuthorsData

Tula State University (Tula, Russia):

Yu. V. Bessmertnaya, Cand. Eng., Associate Prof., Dept. of Plastic Forming Mechanics, e-mail: bessmertny@rambler.ru
S. N. Larin, Dr. Eng., Prof., Head of Dept. of Plastic Forming Mechanics

Economics and Finances
ArticleName World Metallurgy 2020: Consequences and lessons of the pandemic
ArticleAuthor Yu. L. Adno
ArticleAuthorData

Institute of World Economy and International Relations (Moscow, Russia):
Adno Yu. L., Cand. Eng., Leading Researcher, e-mail: yuriadno@mail.ru

Education of specialists and HR policy
ArticleName Implementation of the master’s program «Design and investment and construction management in metallurgy» at the Ural Federal University
ArticleAuthor A. B. Netkachev
ArticleAuthorData

Ural Federal University (Ekaterinburg, Russia):

A. B. Netkachev, Cand. Eng., Associate Prof., Specialist in the field of metallurgical facilities design of the Institute of New Materials and Technologies, Metal Forming Dept., e-mail: netkachev_ab@mail.ru

Journals →  Chernye Metally →  2021 →  #8