Chernye Metally
The ninth issue of the “Chernye metally” journal is presented by its traditional sections, and an insert dedicated to the 70th anniversary of Victor Rashnikov, Chairman of the Board of Directors of PJSC MMK, opens it.
The results of the international youth scientific-practical conference Magnitogorsk Rolling Practice 2018 held at the MSTU named after G. I. Nosov have been introduced by A. G. Korchunov, the Chairman of the Organizing Committee, Vice-Rector for International Affairs.
In the “Steel Production” section, domestic experts published studies on increasing the efficiency of steel deoxidation and desulfurization due to a new deoxidizing mixture, a distinctive feature of which is the dispersity of the components, as well as new recommendations for improving the slag mode of electric smelting, which can improve the lining service life. The publication of foreign researchers described the shock pulse method which for the first time provides accurate information about the state of slowly rotating parts of equipment.
The "Continuous Casting and Foundry Engineering" section presents research on indirect and direct methods for assessing the secondary metal oxidation processes in a continuous caster tundish during casting, on the effect of alloying by nitrated ferrochrome on the surface strength of high-manganese steel castings, and on increasing the modifying and refining effect when using a pulsed impact of an additional high-intensive source, operating on the basis of electropulse effect, on the molten iron.
Results of theoretical and experimental studies of the lubricant film thickness in the friction units are in publications of the "Repair and Maintenance" section.
There are also publications in the "Metrology and Standardization" and "Economics and Finance" sections.
Please find more details below, or order your printed or electronic version of the Journal.
| Exhibitions and conferences | |
| ArticleName | Magnitogorsk Rolling Practice 2018 — International youth scientific-practical conference in the Nosov Magnitogorsk State Technical University |
| ArticleAuthor | A. G. Korchunov |
| ArticleAuthorData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): A. G. Korchunov, Dr. Eng., Prof., Vice Recor on International Affairs, e-mail: international@magtu.ru |
| ArticleName | Anniversary of Viktor Filippovich Rashnikov |
| Steel making | |
| ArticleName | The new material for steel diffusive deoxidizing in the unit for complex steel treatment |
| ArticleAuthors | V. A. Chaikin, A. V. Chaikin, A. D. Kasimgazinov, P. O. Bykov |
| ArticleAuthorsData | Nosov Magnitogorsk state technical university (Magnitogorsk, Russia): V. A. Chaikin, Dr. Eng., Prof., e-mail: sro_ral@mail.ru
Smolensk regional branch of the Russian association of foundrymen (Smolensk, Russia):
“Casting” LLC (Pavlodar, Kazakhstan):
Toraygirov Pavlodar state university (Pavlodar, Kazakhstan): |
| ArticleName | Increase of lining resistance of electric arc furnaces by improving the slag procedure with use of magnesium-containing materials |
| ArticleAuthors | E. A. Shevchenko, A. N. Shapovalov, E. V. Bratkovskiy |
| ArticleAuthorsData | Novotroitsk affiliate of the National University of Science and Technology (Novotroitsk, Russia): E. A. Shevchenko, Cand. Eng., Associate Prof., Chair of metallurgical technologies and equipment, e-mail: ShevchenkoE.A@yandex.ru |
| ArticleName | Possibilities of EAF slag usage in cement production |
| ArticleAuthors | D. Algermissen, A. Ehrenberg |
| ArticleAuthorsData | Research Institute of Building Metarials — FEhS (Duisburg, Germany): D. Algermissen, Mag. Sci., Head of dept. of secondary and slag metallurgy |
| ArticleName | Control of steelmaking equipment parameters |
| ArticleAuthors | A. Mayrhofer, F. Hartl, A. Rohrhofer, R. Stohl |
| ArticleAuthorsData | Primetals Technologies Austria GmbH (Linz, Austria): A. Mayrhofer, e-mail: anna.mayrhofer@primetals.com F. Hartl A. Rohrhofer R. Stohl |
| Continuous Casting and Foundry Processes | |
| ArticleName | Methods for evaluating the secondary oxidation of the steel in CCM tundish. Part 1. Practical examples of estimation of secondary oxidation |
| ArticleAuthors | D. V. Morov, S. A. Botnikov, V. N. Lavrov |
| ArticleAuthorsData | Vyksa Steel Works (Vyksa, Russia): D. V. Morov, Head of the Casting and rolling complex |
| ArticleName | The concepts of perspective modernization using tested and approved continuous casting technology |
| ArticleAuthors | L. Fischer, J. Bausch, I. Hullen, Ch. Frohling, M. Rzepczyk, T. Brand, I. Knopp, H.-G. Brass |
| ArticleAuthorsData | SMS group GmbH (Düsseldorf, Germany): L. Fischer, Head of project management, Continuous casting dept., e-mail: lothar.fischer@sms-group.com
thyssenkrupp Steel Europe (Duisburg, Germany): |
| ArticleName | Wear of high-manganese steel castings |
| ArticleAuthors | K. N. Vdovin, N. A. Feoktistov, D. A. Gorlenko, N. V. Koptseva |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): K. N. Vdovin, Dr. Eng., Prof., Head of the chair of metallurgy and casting processes, e-mail: kn.vdovin@gmail.com |
| ArticleName | Modifying, refining and degassing of cast iron melts through impulse action |
| ArticleAuthors | V. N. Gushchin, V. A. Ulyanov, T. D. Kurilina, G. A. Gevorgyan |
| ArticleAuthorsData | Nizhny Novgorod State Technical University (Nizhniy Novgorod, Russia): V. N. Gushchin, Dr. Eng., Prof., Chair “Metallurgical technologies and equipment”, e-mail: guschinvn@rambler.ru |
| Repair and Technical Maintenance | |
| ArticleName | Effect of operating modes and contact surface oil absorption on lubricant film thickness in heavy-duty friction units of metallurgical plants |
| ArticleAuthors | D. V. Terentyev, N. N. Ogarkov, S. I. Platov, A. V. Kozlov |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): D. V. Terentyev, Cand. Eng., Associate Prof., Chair of metal forming machines and technologies, e-mail: ktnterentyev@mail.ru
South Ural State University (Chelyabinsk, Russia): |
| Metrology and Standardization | |
| ArticleName | Metrological provision of correspondence evaluation for metallurgical products |
| ArticleAuthors | O. I. Boriskin, D. I. Blagoveshchensky, G. A. Nuzhdin, E. I. Khunuzidi |
| ArticleAuthorsData | Tula State University (Tula, Russia): O. I. Boriskin, Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute
State Regional Center for Standardization, Metrology and Testing in Tula Region (Tula, Russia):
National University of Science and Technology “MISiS” (Moscow, Russia): |
| Economics and finances | |
| ArticleName | Comparative analysis of expenses for section rolling mills in different European and American countries |
| ArticleAuthor | S.-E. Lundberg |
| ArticleAuthorData | University of Gävle (Gävle, Sweden): S.-E. Lundberg, Dr., Prof., Dept. of Mechanical Engineering, e-mail: serikl2011@gmail.com |
| * * * | |
| ArticleName | Iron and steel news |
