Journals →  Tsvetnye Metally →  2018 →  #7

Tsvetnye Metally


 

This year Priargunsky Industrial Mining and Chemical Union celebrates its 50th anniversary. The company is the key uranium-mining enterprise of Russia, one of divisions in the structure of JSC Atomredmetzoloto. The set of two articles dated for this occasion opens the issue.

 

The paper by S. I. Korneev is published in the “Economics and management of production” section. The author analyzes the prospects of electric vehicle’s market development and its influencing the market of nickel, which is used in the manufacture of lithium-ion batteries.

 

The paper in the “Noble metals and alloys” section should be also noted. The authors have been studied the process of palladium extraction out of solutions of hydrochloride leaching of the residue of cobalt concentrate opening. Demonstrated is a possibility to selectively evolve 99.5 % of palladium of these solutions in case of extraction by Mextral 84H fluid with Alamine 336 addition and to transfer 87.3 % of palladium into chloride re-extract during subsequent re-extraction by HCl solution.

 

Besides, it is necessary to draw the attention of the readers to the “Metal processing” section and the article “Control of structure formation in selective laser melting process”. The authors have conducted complex investigation of the manner in which the process variables of selective laser melting affect the structure and behaviour of Inconel 718 alloy.

 

Please find more details below, or order your printed or electronic version of the Journal.


50th ANNIVERSARY OF PRIARGUNSKY INDUSTRIAL MINING AND CHEMICAL UNION
ArticleName Indentify of the possibility of sorption concentration of scandium and rare-earth metals from return solutions at producing uranium by drillhole in situ leaching
ArticleAuthors Solovev A. A., Meshkov E. Yu., Bobyrenko N. A., Parygin I. A.
ArticleAuthorsData

JSC “VNIPIpromtechnologies”, Moscow, Russia:

A. A. Solovev, Head of the Research Laboratory of NIL-311, e-mail: solovev.a.a@vnipipt.ru
E. Yu. Meshkov, Chief Specialist of Research Laboratory of NIL-311, e-mail: meshkov.e.j@vnipipt.ru
N. A. Bobyrenko, Senior Researcher of Research Laboratory of NIL-311, e-mail: bobyrenko.n.a@vnipipt.ru
I. A. Parygin, Leading Engineer of the Research Laboratory of NIL-311, e-mail: parygin.i.a@vnipipt.ru

ArticleName The influence of gallium and copper on the corrosion properties of magnetically hard materials of the Nd – Fe – B system
ArticleAuthors Gorelikov E. S., Tarasov V. P., Kutepov A. V., Osipenkova A. A.
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:
E. S. Gorelikov, Deputy Director, Center for Engineering of Industrial Technologies, e-mail: gorelikoves@misis.ru
V. P. Tarasov, Professor, Head of Department Non-ferrous Metals and Gold
A. V. Kutepov, Principal Engineer, Center for Engineering of Industrial Technologies
A. A. Osipenkova, Post-Graduate Student, Department of Non-ferrous Metals and Gold

ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName Nickel and electric vehicle — joint prospects
ArticleAuthor Korneev S. I.
ArticleAuthorData

“Managing Company “Metalloinvest” LLC, Moscow, Russia:

S. I. Korneev, Senior Analyst, e-mail: nirsks@yandex.ru

BENEFICATION
ArticleName Quantitative evaluation of adsorption layer of combined diethyldithiocarbamate on chalkopyrite and arsenopyrite by method of measuring the parameters of surface relief
ArticleAuthors Matveeva T. N., Gromova N. K., Minaev V. A.
ArticleAuthorsData

Institute of Comprehensive Exploitation of Mineral Resources, Russian Academy of Sciences, Moscow, Russia:
T. N. Matveeva, Head of Department, e-mail: tmatveyeva@mail.ru
N. K. Gromova, Researcher
V. A. Minaev, Leading Engineer

ArticleName Selective separation of arsenic-containing sulfide minerals
ArticleAuthors Ignatov D. O., Kayumov A. A., Ignatkina V. A.
ArticleAuthorsData

National University of Sciences and Technology “MISiS”, Moscow, Russia:

D. O. Ignatov, Graduate student, Department of Non-Ferrous Metals and Gold
A. A. Kayumov, Post-graduate student, Department of Benefication and Processing of Minerals and Technogenic Raw Materials
V. A. Ignatkina, Professor, Department of Benefication and Processing of Minerals and Technogenic Raw Materials, e-mail: woda@mail.ru

ArticleName Improvement of the technology for processing gold-containing concentrates
ArticleAuthors Trotsenko I. G., Gerasimenko T. E., Evdokimov S. I.
ArticleAuthorsData

North Caucasian Mining and Metallurgical Institute (State Technological University), Vladikavkaz, Russia:
I. G. Trotsenko, Associate Professor of the Department of Metallurgy of Non-Ferrous Metals, e-mail: itrocenko@mail.ru
T. E. Gerasimenko, Head of the Department of Intellectual Property, e-mail: gerasimenko_74@mail.ru
S. I. Evdokimov, Associate Professor of the Department of Mineral Processing, e-mail: eva-ser@mail.ru

HEAVY NON-FERROUS METALS
ArticleName Use of natural gas in tuyeres with protective coating
ArticleAuthors Korol Yu. A., Naboychenko S. S., Gulyaev S. V.
ArticleAuthorsData

JSC “Russian Copper Company”, Ekaterinburg, Russia:

Yu. A. Korol, Vice-President, e-mail: tsvetmet@rudmet.ru

 

Ural Federal University named after the first President of Russia B. N. Eltsin, Ekaterinburg, Russia:
S. S. Naboychenko, Head of the Department of Metallurgy of Non-ferrous Metals

 

PJSC “Yuzhuralnikel Combinate”, Orsk, Russia:
S. V. Gulyaev, Chief Engineer

NOBLE METALS AND ALLOYS
ArticleName Palladium solvent extraction from hydrochloride leaching solution of the primary PGM-concentrate
ArticleAuthors Kasikov A. G., Dvornikova A. M., Kshumaneva E. S., Tyukin A. P.
ArticleAuthorsData

Institute of Chemistry and Technology of Rare Elements and Mineral Raw materials of KSC RAS, Apatity, Russia:

A. G. Kasikov, Head of Hydrometallurgy sector, e-mail: kasikov@chemy.kolasc.net.ru
A. M. Dvornikova, Senior Researcher
E. S. Kshumaneva, Senior Researcher

 

JSC “Kola MMC”, Monchegorsk, Russia:
A. P. Tyukin, Head of the Department for Scientific and Technical Development and Environmental Safety

RARE METALS AND SEMICONDUCTORS
ArticleName The efficiency of alkaline-acid method of complex leaching of eudialyte concentrate. Part 1
ArticleAuthors Bogatyreva E. V., Chub A. V., Ermilov A. G., Khokhlova O. V.
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:
E. V. Bogatyreva, Professor of the Chair of Non-Ferrous Metals and Gold, e-mail: nelen_vogatureva@mail.ru
O. V. Khokhlova, Assistant of the Chair of Non-Ferrous Metals and Gold

 

JSC “Solikamsk Magnesium Plant”, Solikamsk, Russia:

A. V. Chub, Deputy Head of the Experimental Workshop

 

A. G. Ermilov, Independent Expert

MATERIALS SCIENCE
ArticleName Synthesis of Al – Ni – W alumomatrix composite alloy
ArticleAuthors Gostishchev V. V., Kim E. D., Ri E. H., Khimukhin S. N.
ArticleAuthorsData

Institute of Materials Science, Khanty-Mansi Autonomous District, Far East Division, Russian Academy of Sciences, Khabarovsk, Russia:

V. V. Gostishchev, Senior Researcher, Laboratory of Structural and Instrumental Materials
S. N. Khimukhin, Head of the Laboratory of Structural and Instrumental Materials, e-mail: ximyxin@yandex.ru

 

Pacific State University, Khabarovsk, Russia:

E. D. Kim, Postgraduate Student
E. H. Ri, Head of the Department of Foundry Production and Technology of Metals

METAL PROCESSING
ArticleName Control of structure formation in selective laser melting process
ArticleAuthors Sufiyarov V. Sh., Borisov E. V., Polozov I. A., Masailo D. V.
ArticleAuthorsData

Saint Petersburg Polytechnic University of Peter the Great, Saint Petersburg, Russia:

V. Sh. Sufiyarov, Leading Researcher of the National Technology Initiative Center of Excellence in "Advanced Manufacturing Technologies" (NTI Center), e-mail: Vadim.spbstu@yandex.ru
E. V. Borisov, Researcher of the NTI Center
I. A. Polozov, Researcher of the NTI Center
D. V. Masailo, Researcher of the NTI Center

ArticleName Substantiation of a manufacturing technology of flat rolled products from Al – Mg – Sc based alloys for the aerospace industry
ArticleAuthors Yashin V. V., Aryshenskiy V. Yu., Latushkin I. A., Tepterev M. S.
ArticleAuthorsData

JSC Arkonik SMZ, Samara, Russia:

V. V. Yashin, Manager
V. Yu. Aryshenskiy, Chief Metall Rolling Specialist
I. A. Latushkin, Leading Specialist, e-mail: ilya.latushkin@arconic.com
M. S. Tepterev, Leading Process Engineer

ArticleName The design of a matrix for drawing of materials possessing planar anisotropy of mechanical properties
ArticleAuthors Larin S. N., Platonov V. I., Korotkov V. A.
ArticleAuthorsData

Tula State University, Tula, Russia:

S. N. Larin, Professor, Department of Mechanics of Plastic Forming, e-mail: mpf-tula@rambler.ru
V. I. Platonov, Associate Professor, Department of Mechanics of Plastic Forming
V. A. Korotkov, Senior Researcher, Department of Mechanics of Plastic Forming

Journals →  Tsvetnye Metally →  2018 →  #7