• Acquire
Hide↑
Journals →  CIS Iron and Steel Review →  2018 →  #1

CIS Iron and Steel Review



Raw Materials for Metallurgical Production
ArticleName The research of autohesion properties of sintering burden
ArticleAuthors K. K. Turgunova, N. R. Timirbaeva, E. Kobegen, G. I. Sultamurat, L. I. Kaplun
ArticleAuthorsData

Karaganda state technical university (Karaganda, Kazakhstan):

K. K. Turgunova, Mag. Tech., Quality control engineer, e-mail: kamila.turgunova@mail.ru
N. R. Timirbayeva, Mag. Stud., “Nanotechnology and metallurgy” chair, e-mail: nina_timir@mail.ru
Y. Kobegen, Post-graduate, “Nanotechnology and metallurgy” chair, e-mail: erbolat_911@inbox.ru
G. I. Sultamurat, Cand. Eng., Associate prof., “Nanotechnology and metallurgy” chair, e-mail:  sultamurat_gi@mail.ru

 

Ural federal university (Ekaterinburg, Russia):
L. I. Kaplun, Dr. Eng., Prof., “Metallurgy of iron and alloys” chair
Foundry and Casting
ArticleName Influence of boron modification and cooling conditions during solidification on structural and phase state of heat- and wear-resistant white cast iron
ArticleAuthors V. M. Kolokoltsev, E. V. Petrochenko, O. S. Molochkova
ArticleAuthorsData

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia)

V. M. Kolokoltsev, Dr. Eng., Prof.
E. V. Petrochenko, Dr. Eng., Prof., e-mail: evp3738@mail.ru
O. S. Molochkova, Cand. Eng., Associate Prof.
ArticleName Destruction mechanism of casting graphite in mechanical activation
ArticleAuthors I. E. Illarionov, T. R. Gilmanshina, A. A. Kovaleva, O. N. Kovtun, N. A. Bratukhina
ArticleAuthorsData

Chuvash state university (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof.

 

Siberian federal university (Krasnoyarsk, Russia):
T. R. Gilmanshina, Cand. Eng., Associate Prof., e-mail: gtr1977@mail.ru
A. A. Kovaleva, Cand. Eng., Associate Prof.
O. N. Kovtun, Cand. Eng., Associate Prof.
N. A. Bratukhina, Associate Prof.
Rolling and Metal Forming
ArticleName Improvement of the slitting process for rebar rolling to increase the material yield and rolling mill 370 utilization at PJSC “MMK”
ArticleAuthors S. A. Levandovsky, O. N. Tulupov, A. B. Moller, D. I. Kinzin
ArticleAuthorsData

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):

S. A. Levandovsky, Cand. Eng., Associate Prof., Chair “Materials treatment technologies”, e-mail: levandovskiy@mail.ru
O. N. Tulupov, Dr. Eng., Prof., Chair “Materials treatment technologies”, vice-rector for research and innovations,
A. B. Moller, Dr. Eng., Prof., Head of the chair “Materials treatment technologies”
D. I. Kinzin, Cand. Eng., Associate Prof., Chair “Materials treatment technologies”
Metal Finishing
ArticleName Springback coefficient of round steel beam under elastoplastic torsion
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru
Powder Metallurgy
ArticleName Oxide powders production from iron chloride
ArticleAuthors I. Y. Motovilov, V. A. Luganov, B. Mishra, T. A. Chepushtanova
ArticleAuthorsData

Kazakh national research technical university named after K. I. Satpaev (Almaty, Kazakhstan):

I. Yu. Motovilov, Doctoral student Ph.D. in metallurgy, Chair “Metallurgical furnaces, heat engineering and technology of special materials”, e-mail: motovilov88@inbox.ru
V. A. Luganov, Dr. Eng., Prof., Chair “Metallurgical furnaces, heat engineering and technology of special materials”
T. A. Chepushtanova, Cand. Eng., Associate Prof., Head of the Chair “Metallurgical furnaces, heat engineering and technology of special materials”


Worcester polytechnic university (Worcester, MA, USA):

B. Mishra, Dr. Eng., Prof., Director of the Institute for metal processing
Mechanical Properties of Metal Products
ArticleName Simple analytical dependence of elastic modulus on high temperatures for some steels and alloys
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru
Engineering Technologies
ArticleName Ensuring precision for small arms lock assembly with consideration for interface contact stiffness
ArticleAuthors A. S. Yamnikov, A. A. Malikov, O. S. Kashmin, D. I. Troitsky.
ArticleAuthorsData

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Chair of Manufacturing Technology, e-mail: yamnikovas@mail.ru
A. A. Malikov, Dr. Eng., Prof., Head of the Chair of Manufacturing Technology
O. S. Kashmin, Cand. Eng., Associate Prof., Chair of Manufacturing Technology

 

TTS Translation and Software Agency (Tula, Russia):
D. I. Troitsky, Cand. Eng., Associate Prof., Director
Technopolis
ArticleName Gender stereotypes of the metallurgical monotown
ArticleAuthors R. R. Vakhitov, O. P. Stepanova, L. A. Khabibulin, A. P. Merezhnikov
ArticleAuthorsData

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia)

R. R. Vakhitov, Cand. Ped., Associate Prof., Chair of Sport Development, e-mail: vahitov-roman@yandex.ru
O. P. Stepanova, Cand. Psych., Prof., Head of the Chair of Psychology
D. A. Khabibullin, Cand. Ped., Associate Prof., Chair of Psychology
A. P. Merezhnikov, Cand. Ped., Associate Prof., Chair of Psychology
Journals →  CIS Iron and Steel Review →  2018 →  #1