Tsvetnye Metally
In the May issue, the article and the "Enrichment" section presenting the result of the joint work of Ural and Bulgarian scientists on the introduction of columnar flotation machines at the modular concentrator of "Rudmetal" AD (Bulgaria) are of interest.
In this section, the article by the authors N. K. Algebraistova, D. A. Golsman et al. is also worth mentioning. The authors dealt with the actual problem, which is related to the processing of stale tailings of gold recovery factories and proposed a gravity-flotation scheme for their enrichment.
The article by Yu. A. Korol and S. S. Naboychenko published in the section of "Heavy nonferrous metals" is the beginning of a series of publications on the use of tuyeres with a protective shell when converting nickel and copper raw materials.
In the section of "Material Science", there is an extensive selection of articles on aluminum alloys. The problems of their alloying with nickel and rare earth metals, the influence of iron impurities, and the methods of casting on the properties of alloys are discussed.
Please find more details below, or order your printed or electronic version of the Journal.
BENEFICATION | |
ArticleName | Application of flotation devices of the CFM series in the scheme of enrichment of lead-zinc ores at the modular concentrator “Rudmetal” AD (Bulgaria) |
ArticleAuthors | Viduetskiy M. G., Garifulin I. F., Yochev I. Sh., Purgin A. P. |
ArticleAuthorsData | IUPT “Design Institute”, Ural Federal University, Yekaterinburg, Russia: A. P. Purgin, Head of the Enrichment Department
“Rudmetal” AD, Rudozem, Bulgaria: |
ArticleName | Technology of Co-enrichment of primary and technogenic copper-nickel raw materials |
ArticleAuthors | Evdokimov S. I., Gerasimenko T. E. |
ArticleAuthorsData | North-Caucasian Mining and Metallurgical Institute (State Technological University), Vladikavkaz, Russia: S. I. Evdokimov, Associate Professor of the Department of Mineral processing, e-mail: eva-ser@mail.ru |
ArticleName | Technological evaluation of the stale tailings of the processing of gold-containing low-sulfide ore |
ArticleAuthors | Algebraistova N. K., Golsman D. A., Kolotushkin D. M., Prokopev I. V. |
ArticleAuthorsData | Siberian Federal University, Krasnoyarsk, Russia: N. K. Algebraistova, assistant professor of the department of “Mineral processing”, e-mail address: algebraistova@mail.ru |
HEAVY NON-FERROUS METALS | |
ArticleName | Calculation of a lance in a protective shell for the conversion of nickel and copper matte and recommendations for its application |
ArticleAuthors | Korol Yu. A., Naboychenko S. S. |
ArticleAuthorsData | JSC “Russian Copper Company”, Ekaterinburg, Russia: Yu. A. Korol, Vice President, e-mail: tsvetmet@rudmet.ru
Ural Federal University, Ekaterinburg, Russia: |
LIGHT METALS AND CARBON MATERIALS | |
ArticleName | Electrochemical production of aluminum hydroxide, including the removal of iron from aluminum chloride |
ArticleAuthors | Lysenko A. P., Kondrateva E. S., Shilovskiy S. Yu. |
ArticleAuthorsData | National University of Science and Technology MISiS, Moscow, Russia: A. P. Lysenko, associate professor of the Department of Non-ferrous metals and gold, e-mail address: reikis@yandex.ru |
RARE METALS AND SEMICONDUCTORS | |
ArticleName | Purification of technical silicon tetrachloride with optical quality product obtaining |
ArticleAuthors | Chapygin A. M., Belozerov A. V., Gasanov A. A., Apanasenko V. V. |
ArticleAuthorsData | JSC “Giredmet”, Moscow, Russia: A. M. Chapygin, Leading Researcher |
COMPOSITES AND MULTIPURPOSE COATINGS | |
ArticleName | Relationship between mechanical properties and density of Ti obtained by additive technology |
ArticleAuthors | Loginov Yu. N., Stepanov S. I., Yudin A. V., Tretyakov E. V. |
ArticleAuthorsData | Ural Federal University named after B. N. Eltsin, Ekaterinburg, Russia:
JSC “NPO TSNIITMASH”, Moscow, Russia: |
MATERIALS SCIENCE | |
ArticleName | The technology of synthesis of a master alloy with nickel and rare earth aluminides and its influence on the structure formation, segregation processes and properties of aluminum alloys |
ArticleAuthors | Ri E. H., Ri Khosen, Deev V. B., Goncharov A. V. |
ArticleAuthorsData | Pacific National University, Khabarovsk, Russia: E. H. Ri, Head, Chair of Foundry and Process Metallurgy
V. B. Deev, Professor, Chair of Foundry Technologies and Artistic Processing of Materials, e-mail: deev.vb@mail.ru |
ArticleName | Influence of continuous casting on the structure and properties of 1013 (AD1) alloy castings |
ArticleAuthors | Sergeeva A. M., Lovizin N. S., Sosnin A. A., Mansurov Yu. N. |
ArticleAuthorsData | Institute of Engineering Science and Metallurgy FEB RAS, Komsomolsk-on-Amur, Russia: A. M. Sergeeva, Deputy Director for Research
National University of Science and Technology “MISiS”, Moscow, Russia: |
ArticleName | Effect of iron on the structure, hardening and physical properties of the alloys of the Al – Zn – Mg – Ca system |
ArticleAuthors | Shurkin P. K., Dolbachev A. P., Naumova E. A., Doroshenko V. V. |
ArticleAuthorsData | National University of science and technology “MISiS”, Moscow, Russia: P. K. Shurkin, Engineer of the Department of Metal Forming, e-mail: pa.shurkin@yandex.ru |
ArticleName | Influence of the chill-mold casting process on the structure and properties of aluminum alloys with eutectic constituents |
ArticleAuthors | Mansurov Yu. N., Aksenov A. A., Reva V. P. |
ArticleAuthorsData | National University of science and technology “MISiS”, Moscow, Russia: Yu. N. Mansurov, Professor of the Dapartment of Metals Science of Non-Ferrous Metals, e-mail: yulbarsmans@gmail.com Far Eastern Federal University, Vladivostok, Russia: |
METAL PROCESSING | |
ArticleName | Development and characterization of the manufacturing process of cylindrical-shaped semi-finished products from non-ferrous alloys for stamping on the basis of modeling |
ArticleAuthors | Lisunets N. L., Demetrashvili I. S., Hoang Man Goyi |
ArticleAuthorsData | National University of science and technology “MISiS”, Moscow, Russia: N. L. Lisunets, Associate professor of the department of metal forming, e-mail: lisunec@yandex.ru |
ArticleName | Formation of the homogeneous structure of cast large-sized blades of gas turbine devices |
ArticleAuthors | Yakovlev E. I., Berestevich A. I., Zhabrev S. B. |
ArticleAuthorsData | FSUE “VIAM”, Moscow, Russia: E. I. Yakovlev, Leading engineer, e-mail: y-e-i@yandex.ru
PC “ODK-Saturn”, Rybinsk, Russia: |