Chernye Metally
The 2nd issue of “Chernye metally” journal (2018) is opened as usual by the sections “Iron and steel news of the world” and “News of metallurgical companies”.
The experience of the pilot agglomeration unit with replacement of manual control to fully automatized is described in the section “Iron making”.
The next section “Steel making” is devoted to complex application of the melting model for electric arc furnace, including calculation module of a gas cleaning system.
The section “Continuous casting and foundry production” is presented by three papers. The specialists from ArcelorMittal and SMS group revealed the causes of side cracks origination on bloom billets during casting of crack-sensitive materials. Another paper was prepared by the authors from Volgograd State Technical University examined in details inert gas blowing of metal melt jet and its influence on metal quality for stainless steel 38KhNMFA steel forged ingots. The last publication in this section (from Nizhniy Novgorod State Technical University) described development of resource-saving technologies and usage of heat treatment wastes in exothermic mixes.
Joint publication of the National University of Science and Technology “MISiS” and Abinsk Electrometallurgical Plant observed usage of non-destructive control methods (thermoelectric power) for analysis of carbon and silicon content in steel, iron and ferroalloys.
The issue also contains the papers on plate rolling and straightening, automation systems for lifting equipment, current situation in the German iron and steel industry, preparation of the designing and engineering specialists in metallurgy.
The special insert is devoted to 60th anniversary of Alexander Vorobiev, chief editor of “Ore and Metals” publishing house.
Please find more details below, or order your printed or electronic version of the Journal.
| ArticleName | Iron and Steel News of the World |
| News of Metallurgical Companies | |
| ArticleName | News of Metallurgical Companies |
| ArticleName | Tinplate production facilities in Belarus |
| ArticleName | Stacker for transportation of hot-rolled coils |
| Source | Hyster-Yale Deutschland GmbH |
| ArticleName | Infrared thermometers with intellectual IO-Link interface |
| Source | Keller HCW |
| Ironmaking | |
| ArticleName | Thyssenkrupp pilot sintering plant in Duisburg |
| ArticleAuthor | A. Horneber |
| ArticleAuthorData | Siemens AG (Nürnberg, Germany): A. Horneber, Mag. Eng., Digital Factory, e-mail: contact@siemens.com |
| Steelmaking | |
| ArticleName | Process Modelling and Simulation of an EAF and its Dedusting System |
| ArticleAuthors | Th. Meier, A. H. Kolagar, Th. Echterhof, H. Pfeifer |
| ArticleAuthorsData | RWTH Aachen University (Aachen, Germany): Th. Meier, Scientific researcher |
| Continuous casting and foundry production | |
| ArticleName | Side crack propagation in cast blooms at Ruhrort plant of ArcelorMittal |
| ArticleAuthors | U. Leuschke, D. Kirsch, U. Grafe, U. Plociennik, M. Reifferscheid |
| ArticleAuthorsData | ArcelorMittal Ruhrort (Duisburg, Germany): U. Leuschke, Dr. Eng., Quality control / Technology development
SMS Group (Düsseldorf, Germany): |
| ArticleName | Improvement of the casting technology for large ingots for rise of reliability and operating durability of a turbine set rotors manufactured of these ingots |
| ArticleAuthors | N. A. Zyuban, D. V. Rutskii |
| ArticleAuthorsData | Volgograd State Technical University (Volgograd, Russia): N. A. Zyuban, Dr. Eng., Prof., Head of Chair of Materials Technology |
| ArticleName | Development of compositions of exothermic mixtures for steel and iron castings using wastes of thermal production |
| ArticleAuthors | A. N. Grachev, I. O. Leushin, L. I. Leushina |
| ArticleAuthorsData | Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia): A. N. Grachev, Cand. Eng., Associate Prof., Deputy head of the chair “Metallurgical equipment and technologies”, e-mail: mto@nntu.ru |
| Metallurgy and metallography | |
| ArticleName | Study of thermoelectrical properties of Fe–C–Si–Mn alloys |
| ArticleAuthors | A. M. Belenkiy, K. R. Udalaya, S. I. Chibizova |
| ArticleAuthorsData | National University of Science and Technology “MISiS” (Moscow, Russia): A. M. Belenkiy, Dr. Eng., Prof., Chair of power-efficient and resource-saving industrial technologies, e-mail: energomet@misis.ru
Abinsk Electrometallurgical Worls (Abinsk, Russia): |
| Rolling and other metal formng processes | |
| ArticleName | Development of centering guide for quality improvement of steel heavy plates in a roller straightening machine |
| ArticleAuthors | E. A. Maksimov, R. L. Shatalov |
| ArticleAuthorsData | Intrai CJSC (Chelyabinsk, Russia): E. A. Maksimov, Cand Eng., e-mail: maksimov50@mail.ru
Moscow Polytechnic university (Moscow, Russia): |
| Power engineering and ecology | |
| ArticleName | Optimization of charge material composition in SHS process with ferrosilide fabrication from gaseous wastes of metallurgical production |
| ArticleAuthors | N. N. Safronov, I. A. Savin, L. B. Mingaleeva |
| ArticleAuthorsData | Kazansky (Privolzhsky) Federal University (Naberezhnye Chelny, Russia): N. N. Safronov, Dr. Eng., Prof., Chair of Technical Engineering, e-mail: safronov-45@mail.ru
Kazansky National Research Technical University (Kazan, Russia): |
| Automation and managing systems | |
| ArticleName | Methanol and its fabrication methods in the iron and steel plants |
| ArticleAuthors | T. Buddenberg, Ch. Bergins, G. Harp |
| ArticleAuthorsData | Mitsubishi Hitachi Power Systems Europe GmbH (Duisburg, T. Buddenberg, Mag. Eng., Head of Product Development, e-mail: t_buddenberg@eu.mhps.com
Harp Process Chemistry Consulting (Düsseldorf, Germany): |
| ArticleName | Automatic crane at the Bilstein Group plant: compatibility and efficiency |
| ArticleAuthor | R. Jentzsch |
| ArticleAuthorData | Siemens AG (Münster, Germany): R. Jentzsch, Digital Factory, e-mail: roland.jentzsch@siemens.com |
| Economics and finances | |
| ArticleName | German iron and steel industry: challenges and perspectives |
| ArticleAuthor | K. Hardtke |
| ArticleAuthorData | Ratingen, Germany: |
| HR policy and labour protection | |
| ArticleName | Improvement of the master’s program “Designing and investing-building management in metallurgy” in the Ural Federal university |
| ArticleAuthor | A. B. Netkachev |
| ArticleAuthorData | Ural Federal university (Ekaterinburg, Russia): A. B. Netkachev, Cand. Eng., Associate Prof., Specialist in Designing of Metallurgical Processes, Institute of New Materials and Technologies, e-mail: netkachev_ab@mail.ru |
| ArticleName | Additional education for rising the professional skills |
| ArticleAuthor | S. Prohaska |
| ArticleAuthorData | Seminar consult training and education company (Vienna, Austria): S. Prohaska, consultant, e-mail: redaktion@stahleisen.de |
| * * * | |
| ArticleName | To the 60th anniversary of Alexandr Vorobiev |
