Chernye Metally
The 8th issue of “Chernye Metally” journal (2017) contains the most of its conventional sections. It is opened, as usual, by the section “Iron and steel news of the world” and “News of metallurgical companies”.
The section “Iron making” is completely devoted to national developments. It is opened by the article on improvement of charge preparation systems in blast furnaces. The authors – L. A. Vaisberg and his colleagues used innovative screens of new generation for this purpose.
Two other papers are presented by the specialists from Magnitogorsk State Technical University and Magnitogorsk Iron and Steel Works. One of them describes joint researches in improvement of blast furnace practice via creation of the conditions for rise of natural gas consumption using raw materials with increased strength. Another examines operation features of gear boxes of skip hoists through modernization of lubrication procedures and working properties of bearing blocks.
The article in “Continuous casting” section observes investigations of assimilation of non-metallic inclusions by mould slag. It was established on the base of slag forming mathematical model that average chemical composition of such inclusions entering slag corresponds to manganese oxides.
“Coating and surface processing” section includes the papers presented by German companies – Salzgitter Mannesmann Forschung (improvement of skin pass rolling technology using work rolls with Topocrom galvanized steel coating) and Deutsche Edelstahlwerke (scale removal from wire coils via water pulverization).
I. I. Barankova et al. have described the advantages of induction heating in heat treatment based on the experimental results obtained at Magnitogorsk and Moscow plants. Possibility of achieving of the required mechanical properties and microstructure for wire and wire rod is confirmed and practical recommendations for heating rate and heating temperature are given.
The issue also includes publications in the following sections: “Power engineering and ecology”, “Economics and finances” and “Chronicle”.
You may find below more details about the issue or book printed or electronic version of the journal.
ArticleName | Iron and Steel News of the World |
News of Metallurgical Companies | |
ArticleName | Outokumpu develops new products for corrosion resistant applications |
ArticleAuthor | P. Erkkila |
ArticleAuthorData | Outokumpu (Espoo, Finland): Erkkilä P., Chief Technology Officer, e-mail: redaktion@stahleisen.de |
ArticleName | Tata Steel develops digital steel trading |
ArticleAuthor | H. Fischer |
ArticleAuthorData | Tata Steel (London, UK): Fischer H., CEO of European Operations, e-mail: redaktion@stahleisen.de |
Ironmaking | |
ArticleName | Improvement of charge preparation systems in blast furnace practice |
ArticleAuthors | L. A. Vaisberg, A. N. Korovnikov, G. S. Podgorodetskiy. |
ArticleAuthorsData | Research and Engineering Corporation “Mekhanobr Tekhnika” (St. Petersburg, Russia): Vaisberg L. A., Dr. Eng., Prof., Academician of the Russian Academy of Sciences, Chairman of the Board of Directors, Company Scientific Advisor, e-mail: gornyi@mtspb.com
National University of Science and Technology “MISiS” (Moscow, Russia): |
ArticleName | Improvement of blast furnace practice due to creation of the conditions for elevation of natural gas consumption via usage of raw materials with increased strength |
ArticleAuthors | S. K. Sibagatullin, A. S. Kharchenko, V. P. Chernov, V. A. Beginyuk |
ArticleAuthorsData | Magnitogorsk State Technical University named after G. I. Nosov (Magnitogorsk, Russia): Sibagatullin S. K., Dr. Eng., Prof., Chair of Metallurgy and Casting Processes E-mail (common): as.mgtu@mail.ru
Magnitogorsk Iron and Steel Works (Magnitogorsk, Russia): Beginyuk V. A., Leading Specialist of Technological Group, Blast Furnace Shop |
ArticleName | Examination of properties of lubricants during operation of gear boxes of skip hoists in blast furnaces |
ArticleAuthors | D. V. Terentyev, S. I. Platov, N. N. Ogarkov, Yu. V. Zhirkin |
ArticleAuthorsData | Magnitogorsk State Technical University named after G. I. Nosov (Magnitogorsk, Russia): Terenyev D. V., Cand. Eng., Associate Prof., Chair of Equipment and Technologies of Metal Processes, e-mail: ktnterentyev@mail.ru |
Continuous casting | |
ArticleName | Investigation of assimilation of non-metallic inclusions by mould slag during steel continuous casting |
ArticleAuthors | V. N. Selivanov, A. V. Filippov, E. V. Dyuldina, V. P. Chernov |
ArticleAuthorsData | Magnitogorsk State Technical University named after G. I. Nosov (Magnitogorsk, Russia): Selivanov V. N., Cand. Eng., Prof., Chair of Metallurgy and Casting Processes |
Coating and surface processing | |
ArticleName | Improvement of skin pass rolling to provide better surface quality of Zn-coated steel |
ArticleAuthors | Th. Koll, M. Bretschneider, T. Klinkberg, F. Luther, B. Maas |
ArticleAuthorsData | Salzgitter Mannesmann Forschung GmbH (Salzgitter, Germany): Koll Th., Dr. Nat., Head of Dept. “Metal Coatings”, e-mail: t.koll@sz.szmf.de
Poppe + Potthoff Präzisionsstahlrohre GmbH (Werther, Germany): |
ArticleName | Experience of integration of water processing facilities in continuous pickling line |
ArticleAuthors | B. Wendler, M. Kozariszczuk, S. Bange |
ArticleAuthorsData | VDEh Institute of Industrial Researches (Düsseldorf, Germany): Wendler B., Dr. Eng., Head of the Project, e-mail: barbara.wendler@bfi.de
Deutsche Edelstahlwerke GmbH (Hagen, Germany): |
Heating and heat treatment | |
ArticleName | Development of heating induction technologies for heat treatment |
ArticleAuthors | I. I. Barankova, U. V. Mikhailova, R. G. Mugalimov, G. V. Nikiforov |
ArticleAuthorsData | Magnitogorsk State Technical University named after G. I. Nosov (Magnitogorsk, Russia) Barankova I. I., Dr. Eng., Prof., Head of the Chair of Informatics and Information Security
“Magnitogorskgazstroy” JSC (Magnitogorsk, Russia): |
Power engineering and ecology | |
ArticleName | Practice of recycling operations in iron direct reduction units |
ArticleAuthors | Ch. Brunner, J. Schwelberger, A. Fleischanderl, A. Ropke |
ArticleAuthorsData | Primetals Technologies Austria GmbH (Linz, Austria): Brunner Ch., e-mail: christian.a.brunner@primetals.com
ArcelorMittal Hamburg GmbH (Hamburg, Germany): |
ArticleName | Complex steel production technology and its power engineering features |
ArticleAuthors | J. Reichel, M. Baldermann, H.-P. Domels, M. Sprecher |
ArticleAuthorsData | Hüttenwerke Krupp Mannesmann GmbH (Duisburg, Germany) Reichel J., Dr. Eng., Head of Dept.“Power, Infrastructure and Equipment”
thyssenkrupp Steel Europe AD (Duisburg, Germany)
VDEh Steel Institute (Düsseldorf, Germany) |
Economics and finances | |
ArticleName | Rise of global steel consumption in 2016–2017 |
ArticleName | Sustainable steel production: policy and indicators in 2016 |
ArticleName | World Steel Association elects new officers and members |
ArticleName | Germany occupies average position in Europe for salaries in private industrial sector |
ArticleName | Current level of European-Chinese relations |
ArticleAuthor | A. Schwarz |
ArticleAuthorData | Verlag Stahleisen GmbH (Düsseldorf, Germany): Schwarz A., Prof, e-mail: antek.schwarz@stahleisen.de |
Chronicle | |
ArticleName | Scientific-practical seminar on innovative engineering solutions in metallurgical and casting production |
ArticleAuthor | L. I. Leushina |
ArticleAuthorData | Nizhny Novgorod State Technical University named after R. E. Alekseev (Nizhny Novgorod, Russia): Leushina L. I., Cand. Eng., Associate Prof., Chair “Metallurgical Technologies and Equipment”, e-mail: igoleu@yandex.ru |