Journals →  CIS Iron and Steel Review →  2017 →  #1

CIS Iron and Steel Review



ArticleName Ecological indicators in the system of non-financial reporting at industrial enterprises
ArticleAuthors V. M. Kolokoltsev, K. N. Vdovin, T. V. Mayorova, O. S. Ponomareva
ArticleAuthorsData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

V. M. Kolokoltsev, Dr. Eng., Prof., Rector, kwm@magtu.ru

K. N. Vdovin, Dr. Eng., Prof., Head of the Chair of Metallurgy and Casting Processes, kn.vdovin@gmail.com

T. V. Mayorova, Senior Lecturer, the Chair of Management, mtvl_2010@rambler.ru

O. S. Ponomareva, Cand. Ped., Ass. Prof., the Chair of Management, slava_5@inbox.ru

ArticleName Simulation of aerodynamic flows of gas withdrawal from coke batteries
ArticleAuthors I. I. Beloglazov, V. Yu. Bazhin
ArticleAuthorsData

St. Petersburg Mining University (St. Petersburg, Russia):

I. I. Beloglazov, Cand. Eng., Associate Prof., Chair of Automation of Technological Processes and Production Facilities
V. Yu. Bazhin, Dr. Eng., Prof., Head of the Chair of Automation of Technological Processes and Production Facilities, e-mail: bazhin-alfoil@mail.ru

ArticleName System improvement of vanadium hot metal process at EVRAZ NTMK
ArticleAuthors A. V. Kushnarev, V. V. Filippov, V. A. Mikhalev, B. S. Tleugabulov
ArticleAuthorsData

Evraz NTMK (Nizhniy Tagil, Russia):

A. V. Kushnarev, Dr. Eng., Managing Director;
V. V. Filippov, Deputy Head of Technical Administration on Sintering, Coke and blast Furnace Operation, Valentin.Filippov@evraz.com
V. A. Mikhalev, Head of the Blast Furnace Bureau of Technical Administration, Vladislav.Mikhalev@evraz.com

 

Nizniy Tagil Technological Institute, Affiliate of the Ural Federal University (Nizhniy Tagil, Russia):
B. S. Tleugabulov, Dr. Eng., Associate Prof., bstz10@mail.ru

ArticleName Study of the effect of complex alloying of high-manganese steel by Ti–Ca–N alloying composition on its microstructure, mechanical and operating properties
ArticleAuthors K. N. Vdovin, D. A. Gorlenko, N. A. Feoktistov, V. K. Dubrovin
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

K. N. Vdovin, Dr. Eng., Prof., Head of the Chair of Metallurgy and Casting Processes, e-mail: kn.vdovin@gmail.com
D. A. Gorlenko, Cand. Eng., Assistant of Dept. of Foundry and Materials, e-mail: gorldima@yandex.ru
N. A. Feoktistov, Cand. Eng., Acting Associate Prof., Chair of Metallurgy and Casting Processes

 

South Ural State University (Chelyabinsk, Russia):
V. K. Dubrovin, Dr. Eng., Prof., Chair of Pyrometallurgy and Casting Technologies

ArticleName Relation between anomalies of ferrum physical properties at ∼650 °C with possible transformation in it
ArticleAuthors K. Yu. Shakhnazarov, E. I. Pryakhin
ArticleAuthorsData

St. Petersburg State Mining University (St. Petersburg, Russia):

K. Yu. Shakhnazarov, Cand. Eng., Associate Prof., the Chair of Material Science and Technology of Art Objects, e-mail: karen812@yandex.ru
E. I. Pryakhin, Dr. Eng., Prof., the Chair of Material Science and Technology of Art Objects

ArticleName Study of microstructure of rolled heavy plates made of low-alloyed pipe steel with increased strength and cold resistance
ArticleAuthors M. V. Chukin, P. P. Poletskov, O. A. Nikitenko, D. G. Nabatchikov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

M. V. Chukin, Dr. Eng., Prof., Head of the Chair of Material Processing Technology, First Vice-Rector on Science and Innovations, e-mail: m.chukin@mail.ru
P. P. Poletskov, Dr. Eng., Prof., the Chair of Material Processing Technology, e-mail: pavel_poletskov@mail.ru
O. A. Nikitenko, Cand. Eng., Research Assistant, e-mail: olganikitenko@list.ru
D. G. Nabatchikov, Cand. Eng., Research Assistant, e-mail: nabat4ikov@mail.ru

 

The work has been conducted with participation of S. V. Denisov, P. A. Stekanov, E. V. Braichev, N. V. Koptseva, Yu. Yu. Efimova, M. S. Gushchina, A. S. Ishimov, M. S. Zherebtsov, D. M. Chukin.

ArticleName Calculation of technological parameters of O-forming press for manufacture of large-diameter steel pipes
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru

ArticleName Study of structural transformation of hot-rolled carbon billets for high-strength ropes for responsible applications via the method of thermal analysis
ArticleAuthors A. G. Korchunov, G. S. Gun, O. P. Shiryaev, K. G. Piviovarova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. G. Korchunov, Dr. Eng., Prof., Vice-Rector on International Affairs
G. S. Gun, Dr. Eng., Prof., Advisor of the Rector
K. G. Pivovarova, Cand. Eng., Associate Prof., Chair of Materials Processing Technologies, e-mail: kgpivovarova@gmail.com

 

Magnitogorsk Hardware and Metallurgical Plant “MMK-Metiz” (Magnitogorsk, Russia):

O. P. Shiryaev, Director

ArticleName Numerical model of the forming process for integral assemblies of ball joints using plastic deformation via rolling-up
ArticleAuthors I. G. Gun, I. Yu. Mezin, I. A. Mikhailovsky, D. A. Pesterev, E. G. Kasatkina
ArticleAuthorsData

“BelMag” Scientific and Production Corporation (Magnitogorsk, Russia):

I. G. Gun, Dr. Eng., Prof., General Director
D. A. Pesterev, Leading Product Design Engineer, Design Engineering Dept., e-mail: pesterev@belmag.ru

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

I. Yu. Mezin, Dr. Eng., Prof., Head the Chair of Automobile Technology, Certification and Service
I. A. Mikhailovsky, Dr. Eng., Associate Prof., the Chair of Automobile Technology, Certification and Service

E. G. Kasatkina, Cand. Eng., Associate Prof., the Chair of Automobile Technology, Certification and Service

ArticleName Mathematical model of the technological parameters' calculation of flanging press and the formation criterion of corrugation defect on steel sheet's edge
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru

ArticleName Analytical review of the foreign publications about the methods of rise of operating parameters of cathode blocks during 1995–2014
ArticleAuthors R. Yu. Feshchenko, O. O. Erokhina, A. L. Kvanin, D. S. Lutskiy, V. V. Vasilyev
ArticleAuthorsData

St. Petersburg State Mining University (St. Petersburg, Russia):

R. Yu. Feshchenko, Cand. Eng., Assistant of the Chair of Automation of Technological Processes and Production, e-mail: feshchenko.r.yu@mail.com
O. O. Erokhina, Bachelor
D. S. Lutskiy, Cand. Eng., Associate Prof. Of the Chair of General and Physical Chemistry
V. V. Vasilyev, Cand. Eng., Assistant of the Chair of Metallurgy

 

Scientific and Technological Center of “Energoprom” (Moscow, Russia):

A. L. Kvanin, Cand. Phys.-Math., Head of Scientific-Technical Projects

Journals →  CIS Iron and Steel Review →  2017 →  #1