Chernye Metally
The 5th issue of “Chernye Metally” journal (2017) contains the most of its conventional sections. It is opened, as usual, by the section “Iron and steel news of the world” and “News of metallurgical companies”.
The section “Steel making” includes 4 publications. G. Dorofeev with colleagues described the process ORIEN – the newest development for resource-saving and ecologically free steel making technology. N. Tursunov, A. Semin and G. Kotelnikov from the National University of Science and Technology “MISiS” presented the results of their investigations in kinetics of steel desulphurization in induction furnace. The foreign articles in this section described the method of secondary oxidation of refractories during the conract with aluminium-killed steel and the new LM3 lance manipulator providing efficiency rise and lowering the expenses in electric arc furnaces.
“Metal forming” section is again the main section of the issue. The specialists of SMS Group observed operation experience of one of the modern flat rolling complex at Shandong Iron and Steel Rizhao in China. BWG and Salzgitter Flachstalcollaborated successfully in transition of tandem rolling mill on continuous operation and it was the theme of the paper by Th. Preißler and Ch. Schnoklake. The authors from Linz (Austria) have described putting into practice up-to-date rolling stand for heavy plate production. Prof. V. Tyurin from Moscow displayed in his article researches of the effect of macro-shift deformation on mechanical properties of metal forgings made of ingots.
The features of electric power supply systems for iron and steel works are investigated in the paper prepared by the specialists from Lipetsk and Nizhiy Novgorod State Technical Universities.
The issue also includes publications in the following sections: “Steel as material” and “Economics and finances”.
You may find below more details about the issue or book printed or electronic version of the journal.
| ArticleName | Iron and Steel News of the World |
| News of Metallurgical Companies | |
| ArticleName | New cooling tower with natural draft of thyssenkrupp |
| ArticleName | Additional forming opportunities owing to the new process developed in Germany and Japan |
| ArticleName | Optimization of production processes in the electric arc furnace using sensor technology of Sick company |
| ArticleName | Optical emission spectrometer as multi-field device for metal analysis |
| ArticleName | Thermal diagram-multimeter Fluke 279: two measuring tools in one |
| Steel making | |
| ArticleName | The process “ORIEN” for smelting of high-quality steels from ore and energy raw materials based on the principle of the energy self-supplying |
| ArticleAuthors | G. A. Dorofeev, P. R. Yantovsky, K. G. Smirnov, Ya. M. Stepanov |
| ArticleAuthorsData | Ferro-Technology (Tula, Russia): Dorofeev G. A., Cand. Eng., President
NPP “Industrial Technologies and Materials” (Tula, Russia): |
| ArticleName | Kinetic features of desulphurization process during steel melting in induction crucible furnace |
| ArticleAuthors | N. K. Tursunov, A. E. Semin, G. I. Kotelnikov |
| ArticleAuthorsData | National University of Science and Technology “MISiS” (Moscow, Russia): Tursunov N. K., Post-Graduate, u_nadir@mail.ru |
| ArticleName | The method of determination of secondary oxidation potential for refractories in steelmaking furnaces |
| ArticleAuthors | S. Clasen, Ch. Dannert, L. Redecker, A. Sax, P. Quirmbach, M. Weinberg |
| ArticleAuthorsData | Forschungsgemeinschaft Feuerfest e. V. (Höhr-Grenzhausen, Germany) Clasen S., Mag. Eng., Scientific Researcher, e-mail: clasen@fg-feuerfest.de
University Koblenz-Landau (Koblenz, Germany):
Hüttenwerke Krupp Mannesmann GmbH (Duisburg, Germany): |
| ArticleName | Multifunctional method for increase of technological flexibility and operating efficiency in electric arc furnaces |
| ArticleAuthor | A. Opfermann |
| ArticleAuthorData | Badische Stahl-Engineering (Kehl, Germany): Opfermann A., Dr. Eng., Senior Expert Consulting, e-mail: peter.vandervelden@bse-kehl.de |
| Rolling and other metal forming processes | |
| ArticleName | Complex for flat steel production in China |
| ArticleAuthors | T. Schilling, H. Hofer |
| ArticleAuthorsData | SMS group GmbH (Hilchenbach, Germany): Schilling T., Dr., General Project Manager, e-mail: thomas.schilling@sms-group.com |
| ArticleName | Transition of the tandem rolling mill to continuous mode of operation at the works of Salzgitter Flachstahl |
| ArticleAuthors | Th. Preiβler, Ch. Schnoklake |
| ArticleAuthorsData | Salzgitter Flachstahl GmbH (Salzgitter, Germany): Preiβler Th., Mag. Eng., Head of Production Dept. “Pickled/Rolled Strip”
BWG Bergwerk- und Walzwerkmaschinenbau GmbH (Duisburg, Germany): |
| ArticleName | Putting into practice the new flat rolling equipment in Austria |
| ArticleAuthors | A. Freihammer, H. Krenn, P. Blauensteiner |
| ArticleAuthorsData | voestalpine Grobblech GmbH (Linz, Austria): Freihammer A., Head of the project, Rolling Stands, e-mail: andreas.freihammer@voestalpine.com
Buma engineering und Anlagenbau GmbH (Linz, Austria): Krenn H., Owner
Pa-innovations GmbH (Linz, Austria): |
| ArticleName | Increase of resource of mechanical properties for metal steel forgings made of steel Kh12MFA |
| ArticleAuthors | V. A. Tyurin, A. A. Chuchkov, A. L. Sapunov |
| ArticleAuthorsData | National University of Science and Technology “MISIS” (Moscow, Russia): Tyurin V. A., Dr. Eng., Prof., Chair of metal Forming, e-mail: prof.tiurin@mail.ru
“Ruspolymet” JSC (Kulebaki, Russia): |
| ArticleName | Precision stamping line for railroad wheels of high-speed trains |
| ArticleAuthor | C. Schmickler |
| ArticleAuthorData | Jebens GmbH (Korntal-Münchingen, Germany): Schmickler C., CEO, e-mail: info@jebens.dillinger.biz |
| Power Engineering and Ecology | |
| ArticleName | Operating features of electric power supply systems at the iron and steel works |
| ArticleAuthors | A. A. Shpiganovich, O. V. Fedorov, K. A. Pushnitsa, E. V. Churkina |
| ArticleAuthorsData | Lipetsk State Technical University (Lipetsk, Russia): Shpiganovich A. A., Dr. Eng., Prof., Chair of Electric Equipment
Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia): Fedorov O. V., Dr. Eng., Prof., Chair of Management of Innovation Activity |
| ArticleName | The new method of operation of the solid-state switcher of transforming stage in electric steelmaking shop with improvement of its working parameters |
| ArticleAuthors | H. Schnack, K. Kruger, J. Wu, V. Haverkamp |
| ArticleAuthorsData | Helmut Schmidt University (Hamburg, Germany): Schnack H., Mag., Former Scientific Researcher, e-mail: hendrikschnack@posteo.de Haverkamp V., Dr. Eng., Chair of Systems for Processing of Technological Information and Systematic Analysis
Max Aicher GmbH & Co. KG (Freilassing, Germany)
|
| Steel as material | |
| ArticleName | High-quality steel for maximum allowable loads in oil and gas development |
| ArticleName | Prospects of steel lightweight constructions in building industry |
| Economics and finances | |
| ArticleName | Development ways of the iron and steel industry |
| ArticleAuthor | H. Berger |
| ArticleAuthorData | Linz, Austria: Berger H., Dr. Eng., Independent Reviewer, e-mail: bergerha@aon.at |
| ArticleName | Prediction of economical development of Germany in 2017 |
| ArticleAuthor | L. Subran |
| ArticleAuthorData | Euler Hermes (Paris, France): Subran L., Chief Economist, e-mail: antje.stephan@eulerhermes.com |
| ArticleName | EU proposal about quote trading threatens hundred of thousand working places |
| ArticleName | G7 summit in Japan: discussing the crisis in the iron and steel industry |
