Journals →  Non-ferrous Metals →  2015 →  #1

Non-ferrous Metals


 

This issue of the journal «Non-ferrous Metals» shows the article about the method of assessment of corporate investments in development of human capital for non-ferrous metallurgy.

 

The section «Heavy non-ferrous metals» shows the articles, written by the members of Hydrometallurgy Department of Scientific and Production Association «RIVS».

 

The section «Material science» shows the articles of the members of the chair «Physical problems of Material Science» (National Research Nuclear Univerasity «MEPhI»), which worked in the area of modern material science of design and functional materials for exploitation in extreme conditions and nuclear-energetic units. According to this, there are given the results of development and obtaining of rapidly-quenched amphorous and nano-structured alloys-solders for high-temperature sensitive welding of materials of reaction zones of nuclear reactors and another energy-intensive equipment and series of structure-phase researches by zirconium alloys (the basic metal of reaction zones of thermal neutron reactors).

 

You may find below more details about the issue or book printed or electronic version of the journal.


ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName Methodology of assessment of corporate investment in development of human capital in non-ferrous metals industry
ArticleAuthors Nedospasova O. P., Putilov A. V., Moiseeva O. A.
ArticleAuthorsData

Seversk Technological Institute – branch of National Research Nuclear University “MEPhI”, Seversk, Russia:

O. P. Nedospasova, Candidate of Economic Sciences, Assistant Professor, Head of Economics Chair, e-mail: olgaeconomy@mail.ru

 

National Research Nuclear University “MEPhI”, Moscow, Russia.
A. V. Putilov, Doctor of Engineering Sciences, Professor, Dean of a Faculty of Management and Economics of High Technologies
O. A. Moiseeva, Assistant Professor

HEAVY NON-FERROUS METALS
ArticleName Copper distribution in condensation products of lead concentrate melting using Vanyukov’s process
ArticleAuthors Kotykhov M. I., Fedorov A. M.
ArticleAuthorsData

Chair of Non-ferrous Metals and Gold, National University of Science and Technology “MISiS”, Moscow, Russia:

M. I. Kotykhov, Engineer, e-mail: kotykhov.m@gmail.com
A. M. Fedorov, Professor

ArticleName Integrated approach to mine dumps as the promising source of metals and the ecological hazard
ArticleAuthors Trubilov V. S., Klepikov A. S.
ArticleAuthorsData

Scientific and Production Association “RIVS”, Saint Petersburg, Russia:

V. S. Trubilov, Head of Geotechnology Department
A. S. Klepikov, Leading Engineer of Hydrometallurgy Department, e-mail: A_klepikov@rivs.ru

ArticleName Copper concentration from sulfide ore: state-of-the art and prospects
ArticleAuthors Boduen A. Ya., Ivanov B. S., Ukraintsev I. V.
ArticleAuthorsData

Hydrometallurgy Department of Scientific and Production Association “RIVS”, Saint Petersburg, Russia:

A. Ya. Boduen, Head of Liquid Processing Department, e-mail: A_Boduen@rivs.ru
B. S. Ivanov, Production Engineer
I. V. Ukraintsev, Chief Executive Officer

ArticleName Conditioning of low grade concentrates produced by autoclave oxidation leaching of copper-zinc ore
ArticleAuthors Ivanov B. S., Boduen A. Ya., Yagudina Yu. R., Cheremisina O. V.
ArticleAuthorsData

Science and Production Association “RIVS”, Saint Petersburg, Russia:

B. S. Ivanov, Engineer of Solution Production and Processing Department, Hydrometallurgy Board, тел.: +7 (812) 321-57-05
A. Ya. Boduen, Head of Solution Production and Processing Department, Hydrometallurgy Board

 

JSC “Uchaly Mining and Metallurgical Combine”, Uchaly, Russia:
Yu. R. Yagudina, Head of Research Laboratory

 

National Mineral Resources University (University of Mines), Saint Petersburg, Russia:
O. V. Cheremisina, Chief Specialist

LIGHT METALS, CARBON MATERIALS
ArticleName Fluorination of alumina sand type during exhaust gases treatment of aluminum reduction process
ArticleAuthors Pyaterneva A. A., Bazhin V. Yu.
ArticleAuthorsData

National Mineral Resources University (Mining University), Saint Petersburg, Russian Federatation:

A. A. Pyaterneva, Post-Graduate, Department of Metallurgy
V. Yu. Bazhin, Professor, Dean of mineral raw materials processing faculty

METAL PROCESSING
ArticleName Analysis of laser-chemical cleaning of metal surfaces
ArticleAuthors Kaplunov I. A., Rogalin V. E., Filin S. A.
ArticleAuthorsData

Tver State University, Tver, Russia:

I. A. Kaplunov, Professor, e-mail: Ivan.Kaplunov@tversu.ru

 

“National center of lser systems and complexes” JSC, Moscow, Russia:
V. E. Rogalin, Head of a sector

 

Plekhanov National Academy of Economics, Moscow, Russia:
S. A. Filin, Assistant Professor

ArticleName Selective laser melting of heat-resistant Ni-based alloy
ArticleAuthors Sufiiarov V. Sh., Popovich A. A., Borisov E. V., Polozov I. A.
ArticleAuthorsData

Peter the Great Saint Petersburg Polytechnic University, Saint Petersburg, Russia:

V. Sh. Sufiiarov, Leading Researcher, e-mail: vadim.spbstu@yandex.ru
A. A. Popovich, Director of Institute of Metallurgy, Mechanical Engineering and Transport
E. V. Borisov, Post-Graduate, Researcher
I. A. Polozov, Student, Engineer

MATERIAL SCIENCE
ArticleName Crystallization process of nickel-based amorphous alloys
ArticleAuthors Elmanov G. N., Ivanitskaya E. A., Zharikov E. S.
ArticleAuthorsData

National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow, Russia:

G. N. Elmanov, Assistant Professor, e-mail: GNElmanov@mephi.ru
E. A. Ivanitskaya, Post-Graduate Student
E. S. Zharikov, Post-Graduate Student

ArticleName Mutual disorientation texture in α-Zr polycrystals
ArticleAuthors Khramtsova T. P., Skrytnyy V. I., Yaltsev V. N.
ArticleAuthorsData

National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow, Russia:

T. P. Khramtsova, Post-Graduate Student
V. I. Skrytnyy, Senior Researcher, e-mail: VISkrytnyj@mephi.ru
V. N. Yaltsev, Assistant Professor

ArticleName Brazing of modern engineering materials with STEMET amorphous brazing filler metals
ArticleAuthors Sevryukov O. N., Suchkov A. N., Guseva E. V.
ArticleAuthorsData

National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow, Russia:

O. N. Sevryukov, Assistant Professor
A. N. Suchkov, Assistant Professor, e-mail: ansuchkov221283@mail.ru
E. V. Guseva, Post-Graduate Student

ArticleName Surface hardening of structural materials by laser cladding with nickel alloys
ArticleAuthors Dzhumaev P. S., Petrovsky V. N., Polsky V. I., Yakushin V. L.
ArticleAuthorsData

Department “Physical Problems of Materials Science”, National Reseach Nuclear University MEPhI, Moscow, Russia:

P. S. Dzhumaev, Assistant
V. I. Polsky, Assistant Professor, e-mail: vipolskij@mephi.ru
V. L. Yakushin, Professor

 

Department “Laser physics”, National Reseach Nuclear University MEPhI, Moscow, Russia:

V. N. Petrovsky, Assistant Professor

Journals →  Non-ferrous Metals →  2015 →  #1