Journals →  Tsvetnye Metally →  2013 →  #11

Tsvetnye Metally


 

This issue includes the articles, which describe the subject-matter on heavy and light non-ferrous metals, rare metals and composite materials. This issue shares the problems of theory and practice of ore concentration, production and processing of non-ferrous metals, complex usage of crude ore, economics and management of enterprise and industrial automation.

 

The section «Economics and Management of Production» includes the article by I. A. Altushkin, Yu. A. Korol and A. E. Cherepovitsyn, which tells about the methodological approaches to economic evaluation of sustainable development of mining and metallurgical holding.

 

The article «Zirconium: resources, markets, prospects» characterizes the variety of natural and artificial minerals, ores and compounds of zirconium, their basic peculiarities and consumer properties. There is given the review of modern status, problems, current and prospect tendencies of development of raw materials base, production and basic areas of zirconium consumption both in Russian Federation and in the whole world. There is carried out the detail analysis of dynamics of average annual prices on zirconium-containing products in Russia and in the world markets for the last decade.

 

The «Benefifiation» section includes the article by L. N. Krylova, K. A. Vigandt, L. E. Sarukhanova, E. V. Adamov and Zheng Zhi Hong, which describes the advantages and disadvantages of technologies of vat biooxidation of sulphide concentrates, concerning the alternative hydrometallurgical technologies of autoclave leaching, with atmospheric pressure with application of various reagents.

 

The «Metal Processing» section includes the article by N. A. Belov, A. N. Alabin, R. A. Biktagirov, I. A. Matveeva and A. G. Tsydenov, which describes the research of influence of 0.3-0.4% of Zr additive on the density of cold-rolled sheets of aluminium jar alloys (AA3104 type), annealed with the temperatures of up to 450ºC, inclusively. There is shown that addition of Zr in the materials of 3xxx grade is prospective, because it makes possible to increase the density of alloys of such group, saving their basic advantages (in particular, high technological efficiency and corrosion resistance).

 

The article by A. M. Drits and V. V. Ovchinnikov tells about the results of research of structure and properties of jump joints of sheets of aluminium alloy 1565ch M (1565ч М) with alloys AMg5 (АМг5), AMg6 (АМг6), AB (6061) and 7021, obtained by argon-arc welding. The level of mechanic properties of such joints was defined along with the areas of their destruction, depending on the combination of welded alloys.

 

You can find more information about this issue below or by ordering of printed or electronic version of the journal.


ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName International review of market of non-ferrous metals
ArticleAuthor Korneev S. I.
ArticleAuthorData

Korneev S. I., e-mail: nirsks@yandex.ru

ArticleName Methodical approaches to economic evaluation of sustinable development of mining and metallurgical holding
ArticleAuthors Altushkin I. A., Korol Yu. A., Cherepovitsyn A. E.
ArticleAuthorsData

“Russian Copper Company” JSC, Yekaterinburg, Russia:

I. A. Altushkin, Head of a Committee of Directors
Yu. A. Korol, Vice-President, phone: 8 (343) 365-29-00

 

National Mineral Resources University, Saint Petersburg, Russia:

A. E. Cherepovitsyn, Professor, Head of a Chair of Organization and Management

ArticleName Zirconium: resources, markets, prospects
ArticleAuthors Larichkin F. D., Vorobev A. G., Novoseltseva V. D., Popova G. I. Serebryannaya L. S.
ArticleAuthorsData

Institute of Economic Problems named after G. P. Luzin (Kola Science Center of Russian Academy of Sciences), Apatity, Russia:

F. D. Larichkin, Professor, Director, e-mail: lfd@iep.kolasc.net.ru

V. D. Novoseltseva, Assistant Professor, Head of Division of Export-Oriented Industries

 

Chair of Economics, National Research Nuclear University “MEPhI”, Moscow, Russia:

G. I. Popova, Senior Lecturer
L. S. Serebryannaya, Senior Lecturer

 

1Chair of Economics, National Research Nuclear University “MEPhI”, Moscow, Russia; 2“Ore and Metals” Publishing House, Moscow, Russia:
A. G. Vorobev, Professor, Head of a Chair1, Editor-in-Chief2

BENEFICIATION
ArticleName Use of pneumatic flotation machines KFM during the concentration of refractory copper-zinc ores, copper ores and zinc cakes
ArticleAuthors Panshin A. M., Maltsev V. A., Viduetskiy M. G., Purgin A. P., Garifulin I. F.
ArticleAuthorsData

“Ural Mining and Metallurgical Company-Holding” JSC, Verkhnyaya Pyshma, Russia:

A. M. Panshin, Technical Director

 

Institute of Material Sciences and Metallurgy (Ural Federal University named after the first President of Russia B. N. Yeltsin), Yekaterinburg, Russia:


V. A. Maltsev, Director
M. G. Viduetskiy, Councilor of Director of Institute of Material Sciences and Metallurgy (Ural Federal University), Head of Education-Science Information Center
A. P. Purgin, Chief Specialist
I. F. Garifulin, Chief Specialist, e-mail: igor.garifulin@mail.ru

ArticleName Advantages and disadvantages of application of technologies of biooxidation of sulphide concentrates
ArticleAuthors Krylova L. N., Vigandt K. A., Sarukhanova L. E., Adamov E. V., Zheng Zhi Hong
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:

L. N. Krylova, Leading Researcher of a Chair of Concentration of Non-ferrous and Rare Metals' Ores, e-mail: krulov@yandex.ru
K. A. Vigandt, Post-Graduate Student of a Chair of Concentration of Non-ferrous and Rare Metals' Ores

E. V. Adamov, Head of Department of “MISiS” Publishing House
Zheng Zhi Hong, Post-Graduate Student of a Chair of Concentration of Non-ferrous and Rare Metals' Ores

Peoples' Friendship University of Russia, Moscow, Russia:

L. E. Sarukhanova, Assistant Professor of a Chair “Microbiology and virology”

ArticleName Theory of creation of innovation flotation technologies. Part VI. Theory of increasing of selectivity of activities of reagents-frothers during the flotation
ArticleAuthor Abramov A. A.
ArticleAuthorData

Moscow State Mining University, Moscow, Russia:

A. A. Abramov, Professor, e-mail: AbramovAA31@mail.ru

ArticleName Choice of technology of processing of flotation concentrate of Bereznyakovskoe deposit ore
ArticleAuthors Vashchenko G. A., Gudkov S. S., Emelyanov Yu. E., Bogorodskiy A. V., Epiforov A. V.
ArticleAuthorsData

“Yuzhuralzoloto Group of Companies” JSC, Plast, Russia:

G. A. Vashchenko, Chief Dresser

 

“Irgiredmet” JSC, Irkutsk, Russia:
S. S. Gudkov, Head of Laboratory


National Research Irkutsk State Technical University, Irkutsk, Russia:
Yu. E. Emelyanov, Leading Researcher, e-mail: Emelyanov@irgiredmet.ru
A. V. Bogorodskiy, Senior Researcher
A. V. Epiforov, Junior Researcher

HEAVY NON-FERROUS METALS
ArticleName Searching for optimal distribution of oxygen in the system of melting units
ArticleAuthors Ageev N. G., Zhukov V. P., Bulatov K. V., Skopin D. Yu.
ArticleAuthorsData

Ural Federal University named after the first president of Russia B. N. Yeltsin, Yekaterinburg, Russia:

N. G. Ageev, Professor of a Chair of Metallurgy of Heavy Non-ferrous Metals
V. P. Zhukov, Professor of a Chair of Metallurgy of Heavy Non-ferrous Metals, e-mail: zhukov.v.p@mail.ru

 

“Mednogorsk Copper-Sulphur Combine” JSC, Mednogorsk, Russia:

K. V. Bulatov, Chief Engineer
D. Yu. Skopin, Chief Metallurgist

ArticleName Analysis of efficiency of catalytic conversion of reduced sulfur dioxide gas
ArticleAuthors Vasilev Yu. V., Zotikov O. V., Platonov O. I., Tsemekhman L. Sh.
ArticleAuthorsData

“Institute “Gipronikel” LLC, Saint Petersburg, Russia:

O. I. Platonov, Leading Researcher, e-mail: OIPla@nickel.spb.ru
L. Sh. Tsemekhman, Head of Laboratory of Pyrometallurgy

Yu. V. Vasilev, Leading Researcher

Polar Division of “Institute “Gipronikel” LLC, Norilsk, Russia:

O. V. Zotikov, Executive Officer

NOBLE METALS AND ALLOYS
ArticleName Processing of tails of copper-electrolytic slime flotation
ArticleAuthors Mastyugin S. A., Mamyachenkov S. V., Anisimova O. S., Voinkov R. S.
ArticleAuthorsData

“Uralelektromed” JSC, Verkhnyaya Pyshma, Russia:

S. A. Mastyugin, Chief Technologist

R. S. Voinkov, Master of Metallurgical Shop, e-mail: R.Voinkov@elem.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia:

S. V. Mamyachenkov, Leading Researcher, Professor of a Chair of Metallurgy of Heavy Non-Ferrous Metals
O. S. Anisimova, Senior Researcher, Assistant Professor of a Chair of Metallurgy of Heavy Non-Ferrous Metals

ArticleName Influence of acoustic effect on the process of removal of impurities during the gold extraction
ArticleAuthors Strizhko L. S., Boboev I. R., Shigin E. S., Gorbunov E. P., Gavrilov S. A.
ArticleAuthorsData

1Chair of Non-Ferrous Metals and Gold, National University of Science and Technology “MISiS”, Moscow, Russia; 2Irkutsk State Technical University, Irkutsk, Russia:

L. S. Strizhko, Professor1, Consultant of a Chair of Metallurgy of Non-Ferrous Metals2, e-mail: sls_2007.47@mail.ru

 

Chair of Non-Ferrous Metals and Gold, National University of Science and Technology “MISiS”, Moscow, Russia:

I. R. Boboev, Post-Graduate Student
E. S. Shigin, Post-Graduate Student
E. P. Gorbunov, Candidate for a Master's Degree
S. A. Gavrilov, Post-Graduate Student

MAGNESIUM, TITANIUM, RARE METALS, SEMICONDUCTORS
ArticleName New engineering solutions in the production of silicon tetrachloride
ArticleAuthors Pruttskov D. V., Krivoruchko N. P.
ArticleAuthorsData

“Tekhnokhim”, Zaporozhye, Ukraine:

D. V. Pruttskov, Research Adviser, phone: (+38061) 218-41-66
N. P. Krivoruchko, Technical Adviser

ArticleName Sorption of vanadium (V) from sulfuric-acid solutions by nanostructured nitrogen-containing ionites
ArticleAuthors Troshkina I. D., Balanovskiy N. V., Nve Shvan OO, Shilyaev A. V.
ArticleAuthorsData

D. Mendeleyev University of Chemical Technology of Russia, Moscow, Russia:

I. D. Troshkina, Professor, e-mail: tid@rctu.ru
Nve Shvan ОО, Post-Graduate Student
A. V. Shilyaev, Post-Graduate Student

 

“Leading Scientific Research Institute of Chemical Technology” JSC, Moscow, Russia:

N. V. Balanovskiy, Head of Laboratory

ArticleName Obtaining of rare-earth metals by electrolysis method
ArticleAuthors Lysenko A. P., Tarasov V. P., Nalivayko A. Yu., Selnitsyn R. S.
ArticleAuthorsData

Chair of Non-Ferrous Metals and Gold, National University of Science and Technology “MISiS”, Moscow, Russia:

A. P. Lysenko, Assistant Professor, e-mail: reikis@yandex.ru
V. P. Tarasov, Professor, Head of a Chair
A. Yu. Nalivayko, Engineer
R. S. Selnitsyn, Engineer

COMPOZITES AND MULTIPURPOZE COATINGS
ArticleName Technology of obtaining of solid alloys on the basis of titanium carbide by the saturation method, which excludes the volume shrinkage
ArticleAuthor Gurevich Yu. G.
ArticleAuthorData

Kurgan State University, Kurgan, Russia:

Yu. G. Gurevich, Professor of a Chair “Power Engineering and Technology of Metals”, e-mail: ygg@rambler.ru

METAL PROCESSING
ArticleName Influence of zirconium on mechanical properties of annealed sheets of aluminum alloy AA3104
ArticleAuthors Belov N. A., Alabin A. N., Biktagirov R. A., Matveeva I. A., Tsydenov A. G.
ArticleAuthorsData

Chair of Technology of Foundry Processes, National University of Science and Technology “MISiS”, Moscow, Russia:

N. A. Belov, Professor, Director of Engineering Center “Innovation foundry technologies and materials”, e-mail: nikolay-belov@yandex.ru
A. N. Alabin, Head of Department of Engineering Center “Innovation foundry technologies and materials”
R. A. Biktagirov, Candidate for a Master's Degree

 

Subsidiary of “RUSAL” JSC, IP LTD, Moscow, Russia:

I. A. Matveeva, Head of a Project

 

“Plant of aluminium alloys” JSC, Moscow Oblast, Russia:

A. G. Tsydenov, Chief Executive Officer

ArticleName Properties of welded joints of sheets made of 1565CH (1565Ч) alloy in combination with other aluminum alloys
ArticleAuthors Drits A. M., Ovchinnikov V. V.
ArticleAuthorsData

“ALCOA — Samara Metallurgical Plant” JSC, Moscow, Russia:

A. M. Drits, Executive Officer on Development of Business and Technologies, е-mail: Alexander.Drits@alcoa.com

 

Moscow State Industrial University, Moscow, Russia:
V. V. Ovchinnikov, Professor, Chair of Construction Materials Engineering

AUTOMATION
ArticleName Analysis of process of preparation of sinter from ores of non-ferrous and ferrous metals as an object of automatic diagnostics
ArticleAuthors Egorova E. G., Rusinov L. A., Usachev M. V., Salikhov M. Z.
ArticleAuthorsData

Saint Petersburg State Technological Institute (Technical University), Saint Petersburg, Russia:

E. G. Egorova, Post-Graduate Student of a Faculty of Information Technologies and Management
L. A. Rusinov, Professor, Head of a Chair of Automation of Technological Processes and Productions, e-mail: lrusinov@yandex.ru


V. A. Trapeznikov Institute of Control Sciences of Russian Academy of Sciences, Moscow, Russia:

M. V. Usachev, Senior Researcher
M. Z. Salikhov, Senior Researcher

Journals →  Tsvetnye Metally →  2013 →  #11